AGC Develops Amorphous Thin Film Using Unique Sputtering Target Material
Poster: SySAdmin
Posted on May 25, 2016 at 5:07:01 PM
AGC Develops Amorphous Thin Film Using Unique Sputtering Target Material
C12A7 Electride thin film contributes to efficient mass-production of large OLED panels
TOKYO, May 25, 2016 /PRNewswire/ -- AGC Asahi Glass (AGC) today announced it has developed a uniform amorphous thin film using a unique sputtering target material, and has started industrialization and commercial production of the material. Called C12A7 Electride, the material is essential to mass production of both the new thin film and large organic electroluminescent (EL) panels - also known as organic LEDs (OLEDs) - utilizing the film.
https://photos.prnewswire.com/prnvar/20160525/372062
Currently, lithium fluoride (LiF) and alkali-doped organic materials are used as the electron injection material for an OLED display. However, these materials are unstable and are used in an unstable state, which contributes to manufacturing challenges associated with OLED. To address this problem, the AGC Group developed the more stable amorphous C12A7 Electride thin film.
C12A7 is a component of alumina cement. Its structure comprises interconnected "cages," measuring about 0.4 nanometers (nm) in inner diameter, that contain oxygen ions. C12A7 Electride was developed at the Tokyo Institute of Technology by a research group under Professor Hideo Hosono, a material scientist known for the discovery of iron-based superconductors. All of the oxygen ions in the cages are replaced with electrons, enabling the material to conduct electric current like a metal, maintain chemical and thermal stability, and be easy to handle, while retaining the characteristic of readily emitting electrons.
https://photos.prnewswire.com/prnvar/20160525/372061
The amorphous C12A7 Electride thin film, which can be formed through a sputtering process [1] at room temperature using the AGC Group-developed target material, has the following unique characteristics: it is transparent in the visible range; it can emit electrons as easily as metal lithium can; and it is chemically stable even in the atmosphere. By combining this with the TFT element, which uses a transparent amorphous oxide semiconductor (TAOS), the low-driving-voltage electron transport layer can be manufactured stably and with high production yields, even when used in an OLED display with an inverted structure.
https://photos.prnewswire.com/prnvar/20160525/372063
Market research firm IDTechEx forecasts the market for OLED displays will reach nearly US$16 billion this year and will grow to US$57 billion in 2026. AGC Group's Naomichi Miyakawa, Principal Manager, New Product R&D Center, Technology General Division, noted, "TAOS-TFT is suitable for driving a large OLED panel, but there was no available material that functions properly as both an electron injection layer and an electron transport layer - both of which are necessary to realize the inverted structure that makes the best of the panel's performance. With the commercialization of our C12A7 Electride material, we expect to see substantially improved production of oxide TFT-driven OLED panels."
AGC anticipates OLED panels integrating the new C12A7 Electride-based thin film to begin manufacture in the year of Tokyo Olympic Games, 2020 or earlier.
Note:
1. Sputtering process: A metal that forms a thin film is installed in a
vacuum chamber as a target, and rare gas elements (usually argon) and
nitrogen (usually derived from air) - both ionized by applying a high
voltage - are made to collide with the target. Then, atoms on the target
surface are ejected, reaching the substrate to form a film. Because the
principle is simple and various sputtering devices are available, this
method is used in a wide range of technical areas. Recently it has been
used to manufacture thin films for semiconductors, LCDs, plasma displays
and optical disks, all requiring high-quality thin films.
About the AGC Group
AGC Asahi Glass (also called AGC, Registered Company name: Asahi Glass Co., Ltd., Headquarters: Tokyo, President & CEO: Takuya Shimamura) is the parent company of the AGC Group, a world-leading glass solution provider and supplier of flat, automotive and display glass, chemicals, ceramics and other high-tech materials and components. Based on more than a century of technical innovation, the AGC Group has developed a wide range of cutting-edge products. The AGC Group employs some 50,000 people worldwide and generates annual sales of approximately 1.3 trillion Japanese yen through business in about 30 countries.
Under its management policy, AGC plus, the AGC Group manufactures products that provide "new value and functions" for its customers. As a pioneer of display materials, including glass substrates and cover glass, the Group will promote technological innovations to offer new added-value products that satisfy its customers. For more information, please visit http://www.agc-group.com.
Photo - http://photos.prnewswire.com/prnh/20160525/372062
Photo - http://photos.prnewswire.com/prnh/20160525/372061
Photo - http://photos.prnewswire.com/prnh/20160525/372063
SOURCE AGC Asahi Glass
Photo:https://photos.prnewswire.com/prnh/20160525/372062
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160525/372061
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160525/372063
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160525/372062
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160525/372061
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160525/372063
http://photoarchive.ap.org/
AGC Asahi Glass
CONTACT: Junichi Karasuuyama, Manager, Corporate Communications & Investor Relations Office, AGC Asahi Glass, Tel: +81-3-3218-5603, Email: info-pr@agc.com, or in the U.S.: Marie Labrie, CEO, MCA Public Relations, Tel: +1-650-968-8900, Email: mlabrie@mcapr.com
Web Site: http://www.agc-group.com
C12A7 Electride thin film contributes to efficient mass-production of large OLED panels
TOKYO, May 25, 2016 /PRNewswire/ -- AGC Asahi Glass (AGC) today announced it has developed a uniform amorphous thin film using a unique sputtering target material, and has started industrialization and commercial production of the material. Called C12A7 Electride, the material is essential to mass production of both the new thin film and large organic electroluminescent (EL) panels - also known as organic LEDs (OLEDs) - utilizing the film.
https://photos.prnewswire.com/prnvar/20160525/372062
Currently, lithium fluoride (LiF) and alkali-doped organic materials are used as the electron injection material for an OLED display. However, these materials are unstable and are used in an unstable state, which contributes to manufacturing challenges associated with OLED. To address this problem, the AGC Group developed the more stable amorphous C12A7 Electride thin film.
C12A7 is a component of alumina cement. Its structure comprises interconnected "cages," measuring about 0.4 nanometers (nm) in inner diameter, that contain oxygen ions. C12A7 Electride was developed at the Tokyo Institute of Technology by a research group under Professor Hideo Hosono, a material scientist known for the discovery of iron-based superconductors. All of the oxygen ions in the cages are replaced with electrons, enabling the material to conduct electric current like a metal, maintain chemical and thermal stability, and be easy to handle, while retaining the characteristic of readily emitting electrons.
https://photos.prnewswire.com/prnvar/20160525/372061
The amorphous C12A7 Electride thin film, which can be formed through a sputtering process [1] at room temperature using the AGC Group-developed target material, has the following unique characteristics: it is transparent in the visible range; it can emit electrons as easily as metal lithium can; and it is chemically stable even in the atmosphere. By combining this with the TFT element, which uses a transparent amorphous oxide semiconductor (TAOS), the low-driving-voltage electron transport layer can be manufactured stably and with high production yields, even when used in an OLED display with an inverted structure.
https://photos.prnewswire.com/prnvar/20160525/372063
Market research firm IDTechEx forecasts the market for OLED displays will reach nearly US$16 billion this year and will grow to US$57 billion in 2026. AGC Group's Naomichi Miyakawa, Principal Manager, New Product R&D Center, Technology General Division, noted, "TAOS-TFT is suitable for driving a large OLED panel, but there was no available material that functions properly as both an electron injection layer and an electron transport layer - both of which are necessary to realize the inverted structure that makes the best of the panel's performance. With the commercialization of our C12A7 Electride material, we expect to see substantially improved production of oxide TFT-driven OLED panels."
AGC anticipates OLED panels integrating the new C12A7 Electride-based thin film to begin manufacture in the year of Tokyo Olympic Games, 2020 or earlier.
Note:
1. Sputtering process: A metal that forms a thin film is installed in a
vacuum chamber as a target, and rare gas elements (usually argon) and
nitrogen (usually derived from air) - both ionized by applying a high
voltage - are made to collide with the target. Then, atoms on the target
surface are ejected, reaching the substrate to form a film. Because the
principle is simple and various sputtering devices are available, this
method is used in a wide range of technical areas. Recently it has been
used to manufacture thin films for semiconductors, LCDs, plasma displays
and optical disks, all requiring high-quality thin films.
About the AGC Group
AGC Asahi Glass (also called AGC, Registered Company name: Asahi Glass Co., Ltd., Headquarters: Tokyo, President & CEO: Takuya Shimamura) is the parent company of the AGC Group, a world-leading glass solution provider and supplier of flat, automotive and display glass, chemicals, ceramics and other high-tech materials and components. Based on more than a century of technical innovation, the AGC Group has developed a wide range of cutting-edge products. The AGC Group employs some 50,000 people worldwide and generates annual sales of approximately 1.3 trillion Japanese yen through business in about 30 countries.
Under its management policy, AGC plus, the AGC Group manufactures products that provide "new value and functions" for its customers. As a pioneer of display materials, including glass substrates and cover glass, the Group will promote technological innovations to offer new added-value products that satisfy its customers. For more information, please visit http://www.agc-group.com.
Photo - http://photos.prnewswire.com/prnh/20160525/372062
Photo - http://photos.prnewswire.com/prnh/20160525/372061
Photo - http://photos.prnewswire.com/prnh/20160525/372063
SOURCE AGC Asahi Glass
Photo:https://photos.prnewswire.com/prnh/20160525/372062
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160525/372061
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160525/372063
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160525/372062
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160525/372061
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20160525/372063
http://photoarchive.ap.org/
AGC Asahi Glass
CONTACT: Junichi Karasuuyama, Manager, Corporate Communications & Investor Relations Office, AGC Asahi Glass, Tel: +81-3-3218-5603, Email: info-pr@agc.com, or in the U.S.: Marie Labrie, CEO, MCA Public Relations, Tel: +1-650-968-8900, Email: mlabrie@mcapr.com
Web Site: http://www.agc-group.com