Transphorm introduces the industry's only fully-qualified 650V GaN FET with the lowest R(on) in a TO-247
Poster: SySAdmin
Posted on March 23, 2016 at 12:14:01 PM
Transphorm introduces the industry's only fully-qualified 650V GaN FET with the lowest R(on) in a TO-247
Lowest R(on) of 41mOhm and ultra-low Qrr of 175nC increases power density and achieves higher efficiencies over a broad range of power levels
GOLETA, Calif., March 23, 2016 /PRNewswire/ -- Transphorm Inc., a leader in the design and manufacturing of JEDEC-qualified 650V GaN (gallium nitride) semiconductors, introduces the TPH3207WS GaN field effect transistor (FET) with the lowest on-resistance (41 mOhm) in a TO-247 package that reduces system volume as much as 50% without sacrificing efficiency. The device's low Rds(on) and ultra-low Qrr (175nC) bring the benefits of GaN to applications that previously relied on silicon, enabling engineers to achieve power-dense solutions with reduced component count and improved reliability in high-voltage power conversion applications.
https://photos.prnewswire.com/prnvar/20131114/LA16658LOGO
The TPH3207 improves system reliability, performance and power density in an easy-to-handle cascode configuration. These advantages are being realized in hard-switched bridges and the continuous conduction mode (CCM) bridgeless totem-pole power factor correction (PFC) designs being used in on-board chargers, solar inverters, telecom power supplies and other power conversion applications. Transphorm's GaN FET portfolio is also strengthened with the introduction of the TPH3208 family (130 mOhm) in industry-standard TO-220 and PQFN packages, further enabling the GaN revolution.
Key features and benefits of the TPH3207:
-- Fully-qualified GaN technology. Extensive qualification and long-term
reliability of all Transphorm devices, including extended tests for
early infant mortality failure and long-term wear out failures, is
unmatched by any GaN manufacturer.
-- Ease-of-use. Cascode configuration (EZ-GaN(TM)) can be easily driven
with off-the-shelf drivers and its TO-247 industry-standard packaging
allows for ease of design and development and low EMI.
-- Enables more efficient topologies. Allows designers to reduce overall
power supply losses by as much as 40% while achieving up to 99%
efficiency by implementing CCM bridgeless totem-pole PFC designs.
-- Double the power density. Faster switching speeds from low capacitances
and gate charge enable designers to reduce overall system costs.
Tools and support:
-- Learn more about designing with Transphorm's GaN power devices.
-- Find the best GaN power device for your next design.
-- Download Transphorm's Quality White Paper.
Package, availability and pricing:
TPH3207WS samples are available to purchase now and priced at US$22.69 for 1,000-unit quantities.
About Transphorm
Transphorm is a global semiconductor company that designs and manufactures gallium nitride (GaN) devices for high-voltage power conversion applications. Built on an industry-leading IP portfolio and over 300 years of combined GaN engineering expertise, Transphorm is delivering the highest performance and highest reliability GaN devices and best-in-class system-level design support to a growing customer base. Transphorm is creating innovations that move beyond the limitations of silicon to achieve over 99% efficiency and reduce energy loss by more than 40%. Learn more at transphormusa.com.
Editorial Contact: Media Contact:
Philip Zuk, Senior Director, Technical Marketing Greg Evans, Account Executive
Transphorm Inc. WelComm, Inc.
408.688.2084 x 1015 858.279.2100
pzuk@transphormusa.com greg@welcomm.com
Logo - http://photos.prnewswire.com/prnh/20131114/LA16658LOGO
SOURCE Transphorm Inc.
Photo:https://photos.prnewswire.com/prnh/20131114/LA16658LOGO
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20131114/LA16658LOGO
http://photoarchive.ap.org/
Transphorm Inc.
Web Site: http://www.transphormusa.com
Lowest R(on) of 41mOhm and ultra-low Qrr of 175nC increases power density and achieves higher efficiencies over a broad range of power levels
GOLETA, Calif., March 23, 2016 /PRNewswire/ -- Transphorm Inc., a leader in the design and manufacturing of JEDEC-qualified 650V GaN (gallium nitride) semiconductors, introduces the TPH3207WS GaN field effect transistor (FET) with the lowest on-resistance (41 mOhm) in a TO-247 package that reduces system volume as much as 50% without sacrificing efficiency. The device's low Rds(on) and ultra-low Qrr (175nC) bring the benefits of GaN to applications that previously relied on silicon, enabling engineers to achieve power-dense solutions with reduced component count and improved reliability in high-voltage power conversion applications.
https://photos.prnewswire.com/prnvar/20131114/LA16658LOGO
The TPH3207 improves system reliability, performance and power density in an easy-to-handle cascode configuration. These advantages are being realized in hard-switched bridges and the continuous conduction mode (CCM) bridgeless totem-pole power factor correction (PFC) designs being used in on-board chargers, solar inverters, telecom power supplies and other power conversion applications. Transphorm's GaN FET portfolio is also strengthened with the introduction of the TPH3208 family (130 mOhm) in industry-standard TO-220 and PQFN packages, further enabling the GaN revolution.
Key features and benefits of the TPH3207:
-- Fully-qualified GaN technology. Extensive qualification and long-term
reliability of all Transphorm devices, including extended tests for
early infant mortality failure and long-term wear out failures, is
unmatched by any GaN manufacturer.
-- Ease-of-use. Cascode configuration (EZ-GaN(TM)) can be easily driven
with off-the-shelf drivers and its TO-247 industry-standard packaging
allows for ease of design and development and low EMI.
-- Enables more efficient topologies. Allows designers to reduce overall
power supply losses by as much as 40% while achieving up to 99%
efficiency by implementing CCM bridgeless totem-pole PFC designs.
-- Double the power density. Faster switching speeds from low capacitances
and gate charge enable designers to reduce overall system costs.
Tools and support:
-- Learn more about designing with Transphorm's GaN power devices.
-- Find the best GaN power device for your next design.
-- Download Transphorm's Quality White Paper.
Package, availability and pricing:
TPH3207WS samples are available to purchase now and priced at US$22.69 for 1,000-unit quantities.
About Transphorm
Transphorm is a global semiconductor company that designs and manufactures gallium nitride (GaN) devices for high-voltage power conversion applications. Built on an industry-leading IP portfolio and over 300 years of combined GaN engineering expertise, Transphorm is delivering the highest performance and highest reliability GaN devices and best-in-class system-level design support to a growing customer base. Transphorm is creating innovations that move beyond the limitations of silicon to achieve over 99% efficiency and reduce energy loss by more than 40%. Learn more at transphormusa.com.
Editorial Contact: Media Contact:
Philip Zuk, Senior Director, Technical Marketing Greg Evans, Account Executive
Transphorm Inc. WelComm, Inc.
408.688.2084 x 1015 858.279.2100
pzuk@transphormusa.com greg@welcomm.com
Logo - http://photos.prnewswire.com/prnh/20131114/LA16658LOGO
SOURCE Transphorm Inc.
Photo:https://photos.prnewswire.com/prnh/20131114/LA16658LOGO
http://photoarchive.ap.org/
Photo:https://photos.prnewswire.com/prnh/20131114/LA16658LOGO
http://photoarchive.ap.org/
Transphorm Inc.
Web Site: http://www.transphormusa.com