Mentor Graphics Announces Open Manufacturing Language, an Open Internet of Manufacturing Standard for PCB Assembly
Poster: SySAdmin
Posted on February 16, 2016 at 9:35:02 AM
Mentor Graphics Announces Open Manufacturing Language, an Open Internet of Manufacturing Standard for PCB Assembly
WILSONVILLE, Ore., Feb. 16, 2016 /PRNewswire/ -- Mentor Graphics Corporation (NASDAQ: MENT) today announced the launch of the Open Manufacturing Language (OML) initiative that directly addresses the longstanding need and urgent calls from the industry for a printed circuit board (PCB) assembly-specific Internet of Manufacturing solution. For the first time, IT teams, solution providers, and equipment providers can easily integrate shop-floor data to create or enhance added-value manufacturing execution solutions based on a single, normalized, vendor-neutral communication interface. This minimizes development and support effort while ensuring optimum data accuracy, timeliness and completeness.
http://photos.prnewswire.com/prnvar/20140317/AQ83812LOGO
Use of the OML standard supports numerous industry needs and challenges including the practical realization of the Internet of Manufacturing, Industry 4.0 and Smart Factory 1.0 concepts, as well as the automated collection of full traceability data including routing and compliance enforcement.
"The OML standard is a key technology and contributor for the Internet of Manufacturing and Industry 4.0 in PCB assembly. It's our pleasure to work with the OML community," stated Jordan Jiang, President / GM of iEi Integration Corp. "iEi looks forward to involvement with OML to assist with utilization through the offering of quality design and manufacture services. We are excited about seeing OML launched and are looking forward to the business opportunities and benefits that it will undoubtedly bring to the whole industry."
OML creates an operational hierarchy through which neutralized information is exchanged between manufacturing processes. This includes detail of any shop-floor event in the areas of process performance, materials setup and consumption, traceability, process results and parameters, process control (poka-yoke), and quality information from test, inspection and repair processes, both automated and manual. OML resolves numerous issues in automated and manual processes that previous formats could not address.
The OML standard, introduced by Mentor Graphics, is based on more than 15 years of experience in the development of shop-floor interfaces. The standard will be available through an open community on http://www.OMLcommunity.com. The community will provide support and management of new revisions.
"We are very excited to be among the first members of the OML community," stated Ian Ticehurst, Senior Corporate MIS Manager, Hana Microelectronics Public Co., Ltd. "This initiative is perfectly timed to enable our IT team to put their latest ideas into practice following the principles and potential of the Internet of Manufacturing with a fraction of the effort, cost and lead-time originally required."
"For some time now we have seen and heard the demand for a comprehensive shop-floor communication standard that is detailed enough to support the next generation of computerization such as Industry 4.0 solutions," stated Dan Hoz, General Manager of Mentor Graphics Valor Division. "With this initiative, Valor contributes the first step and sets the pace for the revolution in manufacturing for PCB assembly."
Availability and Showcase at APEX 2016
Membership of the community is now open for end-users, machine vendors, and other interested parties by registering at the website where a free download of the full documentation and samples are available. The use of OML will be showcased at many industry tradeshows, such as IPC APEX EXPO 2016 by Mentor Graphics and other members of the community. For further information, visit the website: http://www.OMLcommunity.com.
About Mentor Graphics
Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design and manufacturing solutions, providing products, consulting services and award-winning support for the world's most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues in excess of $1.24 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.
(Mentor Graphics and Valor are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)
For more information, please contact:
Larry Toda
Mentor Graphics
503.685.1664
larry_toda@mentor.com
Logo - http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO
SOURCE Mentor Graphics Corporation
Photo:http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO
http://photoarchive.ap.org/
Mentor Graphics Corporation
Web Site: http://www.mentor.com
WILSONVILLE, Ore., Feb. 16, 2016 /PRNewswire/ -- Mentor Graphics Corporation (NASDAQ: MENT) today announced the launch of the Open Manufacturing Language (OML) initiative that directly addresses the longstanding need and urgent calls from the industry for a printed circuit board (PCB) assembly-specific Internet of Manufacturing solution. For the first time, IT teams, solution providers, and equipment providers can easily integrate shop-floor data to create or enhance added-value manufacturing execution solutions based on a single, normalized, vendor-neutral communication interface. This minimizes development and support effort while ensuring optimum data accuracy, timeliness and completeness.
http://photos.prnewswire.com/prnvar/20140317/AQ83812LOGO
Use of the OML standard supports numerous industry needs and challenges including the practical realization of the Internet of Manufacturing, Industry 4.0 and Smart Factory 1.0 concepts, as well as the automated collection of full traceability data including routing and compliance enforcement.
"The OML standard is a key technology and contributor for the Internet of Manufacturing and Industry 4.0 in PCB assembly. It's our pleasure to work with the OML community," stated Jordan Jiang, President / GM of iEi Integration Corp. "iEi looks forward to involvement with OML to assist with utilization through the offering of quality design and manufacture services. We are excited about seeing OML launched and are looking forward to the business opportunities and benefits that it will undoubtedly bring to the whole industry."
OML creates an operational hierarchy through which neutralized information is exchanged between manufacturing processes. This includes detail of any shop-floor event in the areas of process performance, materials setup and consumption, traceability, process results and parameters, process control (poka-yoke), and quality information from test, inspection and repair processes, both automated and manual. OML resolves numerous issues in automated and manual processes that previous formats could not address.
The OML standard, introduced by Mentor Graphics, is based on more than 15 years of experience in the development of shop-floor interfaces. The standard will be available through an open community on http://www.OMLcommunity.com. The community will provide support and management of new revisions.
"We are very excited to be among the first members of the OML community," stated Ian Ticehurst, Senior Corporate MIS Manager, Hana Microelectronics Public Co., Ltd. "This initiative is perfectly timed to enable our IT team to put their latest ideas into practice following the principles and potential of the Internet of Manufacturing with a fraction of the effort, cost and lead-time originally required."
"For some time now we have seen and heard the demand for a comprehensive shop-floor communication standard that is detailed enough to support the next generation of computerization such as Industry 4.0 solutions," stated Dan Hoz, General Manager of Mentor Graphics Valor Division. "With this initiative, Valor contributes the first step and sets the pace for the revolution in manufacturing for PCB assembly."
Availability and Showcase at APEX 2016
Membership of the community is now open for end-users, machine vendors, and other interested parties by registering at the website where a free download of the full documentation and samples are available. The use of OML will be showcased at many industry tradeshows, such as IPC APEX EXPO 2016 by Mentor Graphics and other members of the community. For further information, visit the website: http://www.OMLcommunity.com.
About Mentor Graphics
Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design and manufacturing solutions, providing products, consulting services and award-winning support for the world's most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues in excess of $1.24 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.
(Mentor Graphics and Valor are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)
For more information, please contact:
Larry Toda
Mentor Graphics
503.685.1664
larry_toda@mentor.com
Logo - http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO
SOURCE Mentor Graphics Corporation
Photo:http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO
http://photoarchive.ap.org/
Mentor Graphics Corporation
Web Site: http://www.mentor.com