Broadcom Announces New Switch Chipsets to Drive 2.5 Gigabit Ethernet into the Enterprise
Poster: SySAdmin
Posted on November 18, 2015 at 8:21:01 AM
Broadcom Announces New Switch Chipsets to Drive 2.5 Gigabit Ethernet into the Enterprise
Higher Port Speeds Deliver Faster Data Rates Offered by 802.11ac Wave 2 Wi-Fi
IRVINE, Calif., Nov. 18, 2015 /PRNewswire/ -- Broadcom Corporation (NASDAQ: BRCM), a global innovation leader in semiconductor solutions for wired and wireless communications today announced new enterprise Ethernet switches designed to deliver the faster data rates offered by 802.11ac Wave 2 Wi-Fi. Built on Broadcom's StrataXGS(®) architecture, the BCM56060 and BCM56160 enable OEMs to design cost-optimized network switches that enable high speed, robust Internet access across both traditional and new all-wireless enterprise networks. For more news, visit Broadcom's Newsroom.
The increased wireless speeds delivered by 802.11ac Wave 2 are exceeding the performance of today's broadly deployed Gigabit Ethernet (GbE), driving enterprises to upgrade network edge switches. The most cost-effective solution is to run 2.5G Ethernet to the access point, thereby unlocking faster wireless speeds and enabling higher bandwidth without needing to re-cable an entire network. Broadcom's new switches address the upgrade needs for both traditional and all-wireless enterprises, and are designed to work with Broadcom's BCM84868 2.5 Gbps Ethernet PHY.
The new BCM56160 is the industry's most integrated Ethernet switch chipset for traditional wired enterprises where desktop terminals, voice-over-IP phones and wireless access points are all connected. The BCM56160 enterprise switch adds 2.5 GbE access point connections to the popular 24 and 48 port Gigabit Ethernet form factors. To accommodate higher Wi-Fi traffic, the device also integrates more high speed 10 Gigabit interfaces for fiber uplinks and delivers double the stacking bandwidth of previous generation devices.
For the all-wireless office built primarily on Wi-Fi access points with few wired terminals, Broadcom's BCM56060 is the first switch product family optimized for 802.11ac Wave 2 enterprise environments. The BCM56060 enables a smaller form factor with low power consumption, providing multi-mode 1 GbE/2.5 GbE Ethernet interfaces with 10 Gigabit uplinks. Because it is designed to connect primarily to access points instead of wired PCs and phones, it cuts cost by eliminating the legacy 1 GbE Ethernet links.
"There's a strong 2.5G Ethernet ramp expected in the coming 5 years," said Alan Weckel, VP Ethernet Switch Analyst at Dell Oro. "We expect 5 million 2.5G ports to be deployed next year and up to 25 million by 2019, driven by the transition to 802.11ac Wave 2 Wi-Fi."
"Broadcom continues to partner with worldwide equipment manufacturers to deliver the most comprehensive portfolio for enterprise networking," said Nick Kucharewski, Broadcom Vice President, Network Switch Marketing. "Our new switch products enable a converged wired/wireless enterprise and deliver highly optimized 2.5 GbE solutions for high density wireless deployments."
"The new Broadcom 2.5 GbE product lines are well aligned with near-term customer demand for faster converged wireless access points and switches, and help us to serve our customers as they upgrade their equipment to the latest Wi-Fi standard," said Eric Broockman, CTO and EVP Engineering at Extreme Networks.
Availability
The BCM56060 and BCM56160 are currently sampling.
For ongoing Broadcom news visit our Newsroom, read our B-Connected Blog, or visit us on Facebook or Twitter. And to stay connected, subscribe to our RSS Feed.
About Broadcom
Broadcom Corporation (NASDAQ: BRCM), a FORTUNE 500® company, is a global leader and innovator in semiconductor solutions for wired and wireless communications. Broadcom® products seamlessly deliver voice, video, data and multimedia connectivity in the home, office and mobile environments. With one of the industry's broadest portfolio of state-of-the-art system-on-a-chip solutions, Broadcom is changing the world by connecting everything®. For more information, go to http://www.broadcom.com.
Broadcom®, the pulse logo, Connecting everything®, the Connecting everything logo and StrataXGS® are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners.
Contacts
--------
Press Investors Sameer Desai
Susan Vander May T. Peter Andrew Director, Investor Relations
Senior Manager, Public Relations Vice President, Treasury & Investor Relations 949-926-4425
408-922-6161 949-926-6932 sameerd@broadcom.com
susanv@broadcom.com andrewtp@broadcom.com
SOURCE Broadcom Corporation; BRCM Infrastructure
Photo:http://photos.prnewswire.com/prnh/20060609/BROADCOMLOGO
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20060609/BROADCOMLOGO
http://photoarchive.ap.org/
Broadcom Corporation; BRCM Infrastructure
Web Site: http://www.broadcom.com
Higher Port Speeds Deliver Faster Data Rates Offered by 802.11ac Wave 2 Wi-Fi
IRVINE, Calif., Nov. 18, 2015 /PRNewswire/ -- Broadcom Corporation (NASDAQ: BRCM), a global innovation leader in semiconductor solutions for wired and wireless communications today announced new enterprise Ethernet switches designed to deliver the faster data rates offered by 802.11ac Wave 2 Wi-Fi. Built on Broadcom's StrataXGS(®) architecture, the BCM56060 and BCM56160 enable OEMs to design cost-optimized network switches that enable high speed, robust Internet access across both traditional and new all-wireless enterprise networks. For more news, visit Broadcom's Newsroom.
The increased wireless speeds delivered by 802.11ac Wave 2 are exceeding the performance of today's broadly deployed Gigabit Ethernet (GbE), driving enterprises to upgrade network edge switches. The most cost-effective solution is to run 2.5G Ethernet to the access point, thereby unlocking faster wireless speeds and enabling higher bandwidth without needing to re-cable an entire network. Broadcom's new switches address the upgrade needs for both traditional and all-wireless enterprises, and are designed to work with Broadcom's BCM84868 2.5 Gbps Ethernet PHY.
The new BCM56160 is the industry's most integrated Ethernet switch chipset for traditional wired enterprises where desktop terminals, voice-over-IP phones and wireless access points are all connected. The BCM56160 enterprise switch adds 2.5 GbE access point connections to the popular 24 and 48 port Gigabit Ethernet form factors. To accommodate higher Wi-Fi traffic, the device also integrates more high speed 10 Gigabit interfaces for fiber uplinks and delivers double the stacking bandwidth of previous generation devices.
For the all-wireless office built primarily on Wi-Fi access points with few wired terminals, Broadcom's BCM56060 is the first switch product family optimized for 802.11ac Wave 2 enterprise environments. The BCM56060 enables a smaller form factor with low power consumption, providing multi-mode 1 GbE/2.5 GbE Ethernet interfaces with 10 Gigabit uplinks. Because it is designed to connect primarily to access points instead of wired PCs and phones, it cuts cost by eliminating the legacy 1 GbE Ethernet links.
"There's a strong 2.5G Ethernet ramp expected in the coming 5 years," said Alan Weckel, VP Ethernet Switch Analyst at Dell Oro. "We expect 5 million 2.5G ports to be deployed next year and up to 25 million by 2019, driven by the transition to 802.11ac Wave 2 Wi-Fi."
"Broadcom continues to partner with worldwide equipment manufacturers to deliver the most comprehensive portfolio for enterprise networking," said Nick Kucharewski, Broadcom Vice President, Network Switch Marketing. "Our new switch products enable a converged wired/wireless enterprise and deliver highly optimized 2.5 GbE solutions for high density wireless deployments."
"The new Broadcom 2.5 GbE product lines are well aligned with near-term customer demand for faster converged wireless access points and switches, and help us to serve our customers as they upgrade their equipment to the latest Wi-Fi standard," said Eric Broockman, CTO and EVP Engineering at Extreme Networks.
Availability
The BCM56060 and BCM56160 are currently sampling.
For ongoing Broadcom news visit our Newsroom, read our B-Connected Blog, or visit us on Facebook or Twitter. And to stay connected, subscribe to our RSS Feed.
About Broadcom
Broadcom Corporation (NASDAQ: BRCM), a FORTUNE 500® company, is a global leader and innovator in semiconductor solutions for wired and wireless communications. Broadcom® products seamlessly deliver voice, video, data and multimedia connectivity in the home, office and mobile environments. With one of the industry's broadest portfolio of state-of-the-art system-on-a-chip solutions, Broadcom is changing the world by connecting everything®. For more information, go to http://www.broadcom.com.
Broadcom®, the pulse logo, Connecting everything®, the Connecting everything logo and StrataXGS® are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners.
Contacts
--------
Press Investors Sameer Desai
Susan Vander May T. Peter Andrew Director, Investor Relations
Senior Manager, Public Relations Vice President, Treasury & Investor Relations 949-926-4425
408-922-6161 949-926-6932 sameerd@broadcom.com
susanv@broadcom.com andrewtp@broadcom.com
SOURCE Broadcom Corporation; BRCM Infrastructure
Photo:http://photos.prnewswire.com/prnh/20060609/BROADCOMLOGO
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20060609/BROADCOMLOGO
http://photoarchive.ap.org/
Broadcom Corporation; BRCM Infrastructure
Web Site: http://www.broadcom.com