Page All:
Page 1
EOS to Showcase its Additive Manufacturing (AM) Solution Portfolio at TCT Asia + Personalize in Shanghai
SHANGHAI, March 12, 2015 /PRNewswire/ -- EOS, the global technology and quality leader for high-end Additive Manufacturing (AM) solutions, is showcasing its Additive Manufacturing (AM) solution portfolio at the TCT Asia + Personalize show debuting inShanghai March 12 to 14, 2015. At their booth D 26 EOS will highlight their latest systems, materials and applications, among them the latest Polymer systemEOS P 396 <http://www.eos.info/systems_solutions/plastic/systems_equipment/eos_p_396> and the latest Direct Metal Laser Sintering (DMLS) systemsEOS M 290 <http://www.eos.info/eos-m290> and EOS M 400 <http://www.eos.info/systems_solutions/metal/systems_equipment/eos_m_400>. All systems meet customer demands, and support the shift of AM from a mere Rapid Prototyping towards a true production technology. The booth will highlight parts that were manufactured on these systems.
<http://photos.prnasia.com/prnh/20150309/8521501461> EOS M 290 Direct Metal Laser Sintering System (DMLS) for Additive Manufacturing (source: EOS) Jack Wu, Regional Manager Greater China at EOS stresses: "Over the last few years we have experienced a strong growth in the industrial Additive Manufacturing sector and expect this trend to continue in the future. Today, EOS has an installed base of 93 AM systems inChina that tripled over the last four years." And he continues: "In China, manufacturers start to appreciate, depending on the application, the capabilities of AM as a true alternative to conventional manufacturing processes. They begin to acknowledge the benefits the technology can bring to their business and their competitiveness through innovative design and manufacturing solutions and e.g. the impressive cost reductions it enables. InChina, aerospace <http://www.eos.info/case-studies?category=Luft-+und+Raumfahrt> applications are currently the key drivers for AM, followed by applications from themedical <http://www.eos.info/case-studies?category=Medizin> and tooling <http://www.eos.info/case-studies?category=Werkzeugbau> sector."
Stephanie Cheong, Marketing Manager EOS Singapore Pte. Ltd. (phone +65-6430-0541, e-Mail:Stephanie.cheong@eos.info <mailto:Stephanie.cheong@eos.info>). For further information please visit the EOS-Website <http://www.eos.info/> and you tube channel <http://www.youtube.com/watch?v=B-0owluhIbw>.
Photo - http://photos.prnasia.com/prnh/20150309/8521501461 <http://photos.prnasia.com/prnh/20150309/8521501461>
SOURCE EOS Electro Optical Systems (Shanghai) Co., Ltd.
EOS Electro Optical Systems (Shanghai) Co., Ltd.
Web Site: http://www.eos.info/
EOS to Showcase its Additive Manufacturing (AM) Solution Portfolio at TCT Asia + Personalize in Shanghai
SHANGHAI, March 12, 2015 /PRNewswire/ -- EOS, the global technology and quality leader for high-end Additive Manufacturing (AM) solutions, is showcasing its Additive Manufacturing (AM) solution portfolio at the TCT Asia + Personalize show debuting inShanghai March 12 to 14, 2015. At their booth D 26 EOS will highlight their latest systems, materials and applications, among them the latest Polymer systemEOS P 396 <http://www.eos.info/systems_solutions/plastic/systems_equipment/eos_p_396> and the latest Direct Metal Laser Sintering (DMLS) systemsEOS M 290 <http://www.eos.info/eos-m290> and EOS M 400 <http://www.eos.info/systems_solutions/metal/systems_equipment/eos_m_400>. All systems meet customer demands, and support the shift of AM from a mere Rapid Prototyping towards a true production technology. The booth will highlight parts that were manufactured on these systems.
<http://photos.prnasia.com/prnh/20150309/8521501461> EOS M 290 Direct Metal Laser Sintering System (DMLS) for Additive Manufacturing (source: EOS) Jack Wu, Regional Manager Greater China at EOS stresses: "Over the last few years we have experienced a strong growth in the industrial Additive Manufacturing sector and expect this trend to continue in the future. Today, EOS has an installed base of 93 AM systems inChina that tripled over the last four years." And he continues: "In China, manufacturers start to appreciate, depending on the application, the capabilities of AM as a true alternative to conventional manufacturing processes. They begin to acknowledge the benefits the technology can bring to their business and their competitiveness through innovative design and manufacturing solutions and e.g. the impressive cost reductions it enables. InChina, aerospace <http://www.eos.info/case-studies?category=Luft-+und+Raumfahrt> applications are currently the key drivers for AM, followed by applications from themedical <http://www.eos.info/case-studies?category=Medizin> and tooling <http://www.eos.info/case-studies?category=Werkzeugbau> sector."
Stephanie Cheong, Marketing Manager EOS Singapore Pte. Ltd. (phone +65-6430-0541, e-Mail:Stephanie.cheong@eos.info <mailto:Stephanie.cheong@eos.info>). For further information please visit the EOS-Website <http://www.eos.info/> and you tube channel <http://www.youtube.com/watch?v=B-0owluhIbw>.
Photo - http://photos.prnasia.com/prnh/20150309/8521501461 <http://photos.prnasia.com/prnh/20150309/8521501461>
SOURCE EOS Electro Optical Systems (Shanghai) Co., Ltd.
EOS Electro Optical Systems (Shanghai) Co., Ltd.
Web Site: http://www.eos.info/