OmniVision Provides Imaging Solutions for Mantis Vision's MV4D 3D Technology Platform for Mobile Devices
Poster: SySAdmin
Posted on January 7, 2015 at 11:07:01 AM
OmniVision Provides Imaging Solutions for Mantis Vision's MV4D 3D Technology Platform for Mobile Devices
LAS VEGAS, Jan. 7, 2015 /PRNewswire/ -- OmniVision Technologies, Inc. (NASDAQ: OVTI), a leading developer of advanced digital imaging solutions, today announced from the Consumer Electronics Show in Las Vegas, that its OV7251 global shutter image sensor has been selected by Mantis Vision as one of the sensors intended for its next-generation 3D camera reference design, as part of its MV4D technology platform for mobile devices. OmniVision's OV7251, as a premier mobile-ready VGA image sensor with global shutter capabilities, will facilitate accurate 3D imaging and content creation for the MV4D technology platform.
http://photos.prnewswire.com/prnvar/20131107/SF12520LOGO-b
"By developing our 3D mobile camera using OmniVision's OV7251 sensor, Mantis Vision's MV4D technology platform has taken a leap forward in meeting the demands of our partners with daylight operability, sub-mm data accuracies, and slim form-factor compatibility," said Gur Arie Bittan, CTO of Mantis Vision. "With OmniVision's support, we expect the new camera reference design to be available for mobile OEM's in mid-2015."
"With its MV4D technology platform, Mantis Vision takes 3D imaging mainstream introducing their technology to compact, high performance mobile devices like smartphones and tablets," said Tehzeeb Gunja, senior partnership and business development manager at OmniVision. "We are very excited about the new, imaginative and compelling user experiences that 3D imaging can deliver."
The 1/7.5-inch OV7251 global shutter sensor enables the MV4D camera to record VGA resolution video at up to 100 frames per second (FPS). By using a global shutter, the OV7251 is able to greatly reduce ambient light constraints, while allowing for simultaneous operation of multiple devices simultaneously without cross interfering. OmniVision's OV7251 also enables excellent low-light sensitivity and provides motion tracking information, facilitating the utilization of accurate and detailed device orientation data.
About OmniVision
OmniVision Technologies (NASDAQ: OVTI) is a leading developer of advanced digital imaging solutions. Its award-winning CMOS imaging technology enables superior image quality in many of today's consumer and commercial applications, including mobile phones, notebooks, tablets and webcams, digital still and video cameras, security and surveillance, entertainment devices, automotive and medical imaging systems. Find out more at http://www.ovt.com.
About Mantis Vision
Mantis Vision develops technologies and products that will bring 3D to every mobile device, home and business. Its software and hardware component solutions, based on its core MV4D "motion capable" 3D range-imaging technology, are designed to enable user-generated content creation (UG3D) throughout the 3D ecosystem.
Mantis Vision's consumer-oriented product offering includes a range of peripheral and embedded UG3D devices. Mantis Vision's first product to enter the market was the F5 Handheld 3D Scanner, a high-end mobile scanning solution for professional applications. The F5 is used in the medical, industrial, defense, law enforcement, and cultural heritage fields, among others. For more information, visit http://www.mv4d.com or follow us on Twitter @mv4d.
Safe-Harbor Language
Certain statements in this press release, including statements regarding the expected benefits, performance, capabilities, and potential market appeal of, as well as anticipated timing of availability of reference designs incorporating the OV7251 are forward-looking statements that are subject to risks and uncertainties. These risks and uncertainties, which could cause the forward-looking statements and OmniVision's results to differ materially, include, without limitation: potential errors, design flaws or other problems with OV7251, customer acceptance, demand, and other risks detailed from time to time in OmniVision's Securities and Exchange Commission filings and reports, including, but not limited to, OmniVision's annual report filed on Form 10-K and quarterly reports filed on Form 10-Q. OmniVision expressly disclaims any obligation to update information contained in any forward-looking statement.
OmniVision® and the OmniVision logo are registered trademarks of OmniVision Technologies, Inc.
Logo - http://photos.prnewswire.com/prnh/20131107/SF12520LOGO-b
SOURCE OmniVision Technologies, Inc.
Photo:http://photos.prnewswire.com/prnh/20131107/SF12520LOGO-b
http://photoarchive.ap.org/
OmniVision Technologies, Inc.
CONTACT: Media Contact: Martijn Pierik, Impress Labs, 602.366.5599, martijn@impresslabs.com, Company Contact: Scott Foster, OmniVision Technologies, 408.567.3077, sfoster@ovt.com, Investor Relations: Arnab Chanda, OmniVision Technologies, 408.653.3144, invest@ovt.com, Mantis Vision Media Contact, Sharon Tzvielli, Mantis Vision, 972.52.3734004, sharon@mantis-vision.com
Web Site: http://www.ovt.com
LAS VEGAS, Jan. 7, 2015 /PRNewswire/ -- OmniVision Technologies, Inc. (NASDAQ: OVTI), a leading developer of advanced digital imaging solutions, today announced from the Consumer Electronics Show in Las Vegas, that its OV7251 global shutter image sensor has been selected by Mantis Vision as one of the sensors intended for its next-generation 3D camera reference design, as part of its MV4D technology platform for mobile devices. OmniVision's OV7251, as a premier mobile-ready VGA image sensor with global shutter capabilities, will facilitate accurate 3D imaging and content creation for the MV4D technology platform.
http://photos.prnewswire.com/prnvar/20131107/SF12520LOGO-b
"By developing our 3D mobile camera using OmniVision's OV7251 sensor, Mantis Vision's MV4D technology platform has taken a leap forward in meeting the demands of our partners with daylight operability, sub-mm data accuracies, and slim form-factor compatibility," said Gur Arie Bittan, CTO of Mantis Vision. "With OmniVision's support, we expect the new camera reference design to be available for mobile OEM's in mid-2015."
"With its MV4D technology platform, Mantis Vision takes 3D imaging mainstream introducing their technology to compact, high performance mobile devices like smartphones and tablets," said Tehzeeb Gunja, senior partnership and business development manager at OmniVision. "We are very excited about the new, imaginative and compelling user experiences that 3D imaging can deliver."
The 1/7.5-inch OV7251 global shutter sensor enables the MV4D camera to record VGA resolution video at up to 100 frames per second (FPS). By using a global shutter, the OV7251 is able to greatly reduce ambient light constraints, while allowing for simultaneous operation of multiple devices simultaneously without cross interfering. OmniVision's OV7251 also enables excellent low-light sensitivity and provides motion tracking information, facilitating the utilization of accurate and detailed device orientation data.
About OmniVision
OmniVision Technologies (NASDAQ: OVTI) is a leading developer of advanced digital imaging solutions. Its award-winning CMOS imaging technology enables superior image quality in many of today's consumer and commercial applications, including mobile phones, notebooks, tablets and webcams, digital still and video cameras, security and surveillance, entertainment devices, automotive and medical imaging systems. Find out more at http://www.ovt.com.
About Mantis Vision
Mantis Vision develops technologies and products that will bring 3D to every mobile device, home and business. Its software and hardware component solutions, based on its core MV4D "motion capable" 3D range-imaging technology, are designed to enable user-generated content creation (UG3D) throughout the 3D ecosystem.
Mantis Vision's consumer-oriented product offering includes a range of peripheral and embedded UG3D devices. Mantis Vision's first product to enter the market was the F5 Handheld 3D Scanner, a high-end mobile scanning solution for professional applications. The F5 is used in the medical, industrial, defense, law enforcement, and cultural heritage fields, among others. For more information, visit http://www.mv4d.com or follow us on Twitter @mv4d.
Safe-Harbor Language
Certain statements in this press release, including statements regarding the expected benefits, performance, capabilities, and potential market appeal of, as well as anticipated timing of availability of reference designs incorporating the OV7251 are forward-looking statements that are subject to risks and uncertainties. These risks and uncertainties, which could cause the forward-looking statements and OmniVision's results to differ materially, include, without limitation: potential errors, design flaws or other problems with OV7251, customer acceptance, demand, and other risks detailed from time to time in OmniVision's Securities and Exchange Commission filings and reports, including, but not limited to, OmniVision's annual report filed on Form 10-K and quarterly reports filed on Form 10-Q. OmniVision expressly disclaims any obligation to update information contained in any forward-looking statement.
OmniVision® and the OmniVision logo are registered trademarks of OmniVision Technologies, Inc.
Logo - http://photos.prnewswire.com/prnh/20131107/SF12520LOGO-b
SOURCE OmniVision Technologies, Inc.
Photo:http://photos.prnewswire.com/prnh/20131107/SF12520LOGO-b
http://photoarchive.ap.org/
OmniVision Technologies, Inc.
CONTACT: Media Contact: Martijn Pierik, Impress Labs, 602.366.5599, martijn@impresslabs.com, Company Contact: Scott Foster, OmniVision Technologies, 408.567.3077, sfoster@ovt.com, Investor Relations: Arnab Chanda, OmniVision Technologies, 408.653.3144, invest@ovt.com, Mantis Vision Media Contact, Sharon Tzvielli, Mantis Vision, 972.52.3734004, sharon@mantis-vision.com
Web Site: http://www.ovt.com