Page All:
Page 1
Lantiq Significantly Reduces Costs of Voice Telephony
New Generation DUSLIC(TM)XS Provides Single or Dual Voice Lines in Home CPE, Features Minimum Power and Very Low BOM Cost
MUNICH and NEUBIBERG, Germany, Oct. 20, 2014 /PRNewswire/ -- Lantiq, a leading supplier of broadband access and home networking technologies, today announced its next generation voice line termination chip for customer premise equipment (CPE) designs. Continuing a track record of innovation, the new DUSLIC(TM)XS reduces the cost for CPE manufacturers to provide wideband-capable voice telephony with fewer external components than any alternative and with a best-in-industry stand-by power figure of less than 20mW (50 percent less than competitor ICs).
DUSLIC XS is the optimum solution to implement dual- or single-line analog phone services on any fiber, cable, LTE or xDSL home gateway device. In addition to the lowest part count and lowest power consumption, the chip integrates automated line testing capabilities that far exceed the requirements of GR.909.
Johannes Eiblmeier, vice president, and head of the Voice and Telecom Products Business Line:
"The latest generation of our DUSLIC family again sets the benchmark for CPE voice line termination. One example is the combined DC/DC mode, which allows use of a single power converter to support two voice lines while still achieving exceptional power consumption to readily meet the stringent requirements defined in the European Code of Conduct (CoC)."
DUSLIC XS Features
-- Twenty percent smaller than predecessor - Single-package, cost and
footprint optimized CODEC/SLIC solution for implementation of the FXS
(Foreign Exchange Subscriber) interface required to support analog fixed
line phone service, available in an 8x8 mm package for dual or
single-voice line, or single-line chip in 7x7 mm package.
-- Most cost efficient solution in the market - Bill-of-Material (BOM) cost
below US 20 cents for dual-line termination achieved through integration
and elimination of duplicated external components (i.e., power
conversion and protection circuits) required for alternative dual-line
designs.
-- CO-grade transmission performance and operation in industrial
temperature range with wideband support (16 kHz, 16 bit linear),
automatic ring current regulation, DTMF generation and detection, and
caller ID generation.
-- Reference designs for 2-layer board solutions, including schematics and
List of Material (LOM) for various applications (PnP, NMOS, flyback,
-48V buck/boost, low input voltage etc.).
-- Integrated line testing features include Capacitance Measurement, Phone
Detection Test, AC Level Metering, Make-and-Break Dial Tone Test, and
Universal Tone Detection Test.
Availability
Lantiq's new DUSLIC XS and associated reference designs are available now and will be shown at the Broadband World Forum, October 21(st) - 23(rd) in Hall 11, booth C10. More Information can be found on the Lantiq web site at: http://www.lantiq.com/duslic/.
About Lantiq
Lantiq, a leading supplier of broadband access and home networking technologies, offers a broad and innovative semiconductor product portfolio for next-generation networks and the Digital Home. More information about Lantiq is available on our Website or via Twitter @Lantiq, LinkedIn and YouTube.
To view the original version on PR Newswire, visit:http://www.prnewswire.com/news-releases/lantiq-significantly-reduces-costs-of-voice-telephony-118915725.html
SOURCE Lantiq
Lantiq
CONTACT: Worldwide Headquarters, Christoph von Schierstaedt, +49 (89) 89899 7556, Schierstaedt@lantiq.com
Web Site: http://www.lantiq.com
Lantiq Significantly Reduces Costs of Voice Telephony
New Generation DUSLIC(TM)XS Provides Single or Dual Voice Lines in Home CPE, Features Minimum Power and Very Low BOM Cost
MUNICH and NEUBIBERG, Germany, Oct. 20, 2014 /PRNewswire/ -- Lantiq, a leading supplier of broadband access and home networking technologies, today announced its next generation voice line termination chip for customer premise equipment (CPE) designs. Continuing a track record of innovation, the new DUSLIC(TM)XS reduces the cost for CPE manufacturers to provide wideband-capable voice telephony with fewer external components than any alternative and with a best-in-industry stand-by power figure of less than 20mW (50 percent less than competitor ICs).
DUSLIC XS is the optimum solution to implement dual- or single-line analog phone services on any fiber, cable, LTE or xDSL home gateway device. In addition to the lowest part count and lowest power consumption, the chip integrates automated line testing capabilities that far exceed the requirements of GR.909.
Johannes Eiblmeier, vice president, and head of the Voice and Telecom Products Business Line:
"The latest generation of our DUSLIC family again sets the benchmark for CPE voice line termination. One example is the combined DC/DC mode, which allows use of a single power converter to support two voice lines while still achieving exceptional power consumption to readily meet the stringent requirements defined in the European Code of Conduct (CoC)."
DUSLIC XS Features
-- Twenty percent smaller than predecessor - Single-package, cost and
footprint optimized CODEC/SLIC solution for implementation of the FXS
(Foreign Exchange Subscriber) interface required to support analog fixed
line phone service, available in an 8x8 mm package for dual or
single-voice line, or single-line chip in 7x7 mm package.
-- Most cost efficient solution in the market - Bill-of-Material (BOM) cost
below US 20 cents for dual-line termination achieved through integration
and elimination of duplicated external components (i.e., power
conversion and protection circuits) required for alternative dual-line
designs.
-- CO-grade transmission performance and operation in industrial
temperature range with wideband support (16 kHz, 16 bit linear),
automatic ring current regulation, DTMF generation and detection, and
caller ID generation.
-- Reference designs for 2-layer board solutions, including schematics and
List of Material (LOM) for various applications (PnP, NMOS, flyback,
-48V buck/boost, low input voltage etc.).
-- Integrated line testing features include Capacitance Measurement, Phone
Detection Test, AC Level Metering, Make-and-Break Dial Tone Test, and
Universal Tone Detection Test.
Availability
Lantiq's new DUSLIC XS and associated reference designs are available now and will be shown at the Broadband World Forum, October 21(st) - 23(rd) in Hall 11, booth C10. More Information can be found on the Lantiq web site at: http://www.lantiq.com/duslic/.
About Lantiq
Lantiq, a leading supplier of broadband access and home networking technologies, offers a broad and innovative semiconductor product portfolio for next-generation networks and the Digital Home. More information about Lantiq is available on our Website or via Twitter @Lantiq, LinkedIn and YouTube.
To view the original version on PR Newswire, visit:http://www.prnewswire.com/news-releases/lantiq-significantly-reduces-costs-of-voice-telephony-118915725.html
SOURCE Lantiq
Lantiq
CONTACT: Worldwide Headquarters, Christoph von Schierstaedt, +49 (89) 89899 7556, Schierstaedt@lantiq.com
Web Site: http://www.lantiq.com