Cadence Offers Immediate Availability of DDR4 PHY IP on TSMC 16nm FinFET Process
Poster: SySAdmin
Posted on May 19, 2014 at 12:21:01 PM
Cadence Offers Immediate Availability of DDR4 PHY IP on TSMC 16nm FinFET Process
SAN JOSE, Calif., May 19, 2014 /PRNewswire/ -- Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation, today announced immediate availability of DDR4 PHY IP (intellectual property) built on TSMC's 16nm FinFET process. The combination of 16nm technology and Cadence's innovative architecture helps customers realize the maximum performance of the DDR4 standard, which is specified to scale up to 3200Mbps, as compared to today's maximum of 2133Mbps for both DDR3 and DDR4 technologies. This technology enables server, network switching, storage fabric and other systems on chip (SoCs) requiring high-memory bandwidth to design-in Cadence® DDR4 PHY IP now and to exploit higher speed DRAMs when they become available.
http://photos.prnewswire.com/prnvar/20140102/SF39436LOGO
The Cadence DDR4 PHY IP supports an unbuffered dual in-line memory module (UDIMM)/ registered dual in-line memory module (RDIMM) with reliability, availability, and serviceability (RAS) features such as cyclic redundancy check (CRC) and data bus inversion (DBI). The new DDR4 PHY IP implements architectural innovations such as 4X clocking to minimize duty cycle distortion, multi-band power isolation for increased noise immunity, and I/O with slew rate control. The Cadence DDR4 PHY IP together with Cadence DDR4 controller are verified in silicon from TSMC's 16nm FinFET process.
"The demand for 16nm FinFET-based designs continues to grow and is driving the market need for a complementary DDR4 IP offering," said Suk Lee, TSMC senior director, Design Infrastructure Marketing Division. "Because we have worked very early and closely with Cadence on this technology, our customers can review the design's silicon results to feel confident about turning to Cadence for comprehensive 16nm support from tools to IP."
"Many of our customers are concerned that their next-generation designs might not reach their performance goals because of the bottleneck in memory systems," stated Martin Lund, Cadence's senior vice president and general manager of the IP Group. "By using Cadence DDR4 IP, we believe our customers can have more confidence that their products will work with future DRAMs designed for higher speeds."
DDR4 PHY IP is silicon-tested and available now. For more information on DDR IP, please visit http://ip.cadence.com/knowledgecenter/customize-main/ddr4-16ff
About Cadence
Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available here.
© 2014 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence and the Cadence logo are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.
For more information, please contact:
Cadence Design Systems, Inc.
408-944-7039
newsroom@cadence.com
Logo - http://photos.prnewswire.com/prnh/20140102/SF39436LOGO
SOURCE Cadence Design Systems, Inc.
Photo:http://photos.prnewswire.com/prnh/20140102/SF39436LOGO
http://photoarchive.ap.org/
Cadence Design Systems, Inc.
Web Site: http://www.cadence.com
SAN JOSE, Calif., May 19, 2014 /PRNewswire/ -- Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation, today announced immediate availability of DDR4 PHY IP (intellectual property) built on TSMC's 16nm FinFET process. The combination of 16nm technology and Cadence's innovative architecture helps customers realize the maximum performance of the DDR4 standard, which is specified to scale up to 3200Mbps, as compared to today's maximum of 2133Mbps for both DDR3 and DDR4 technologies. This technology enables server, network switching, storage fabric and other systems on chip (SoCs) requiring high-memory bandwidth to design-in Cadence® DDR4 PHY IP now and to exploit higher speed DRAMs when they become available.
http://photos.prnewswire.com/prnvar/20140102/SF39436LOGO
The Cadence DDR4 PHY IP supports an unbuffered dual in-line memory module (UDIMM)/ registered dual in-line memory module (RDIMM) with reliability, availability, and serviceability (RAS) features such as cyclic redundancy check (CRC) and data bus inversion (DBI). The new DDR4 PHY IP implements architectural innovations such as 4X clocking to minimize duty cycle distortion, multi-band power isolation for increased noise immunity, and I/O with slew rate control. The Cadence DDR4 PHY IP together with Cadence DDR4 controller are verified in silicon from TSMC's 16nm FinFET process.
"The demand for 16nm FinFET-based designs continues to grow and is driving the market need for a complementary DDR4 IP offering," said Suk Lee, TSMC senior director, Design Infrastructure Marketing Division. "Because we have worked very early and closely with Cadence on this technology, our customers can review the design's silicon results to feel confident about turning to Cadence for comprehensive 16nm support from tools to IP."
"Many of our customers are concerned that their next-generation designs might not reach their performance goals because of the bottleneck in memory systems," stated Martin Lund, Cadence's senior vice president and general manager of the IP Group. "By using Cadence DDR4 IP, we believe our customers can have more confidence that their products will work with future DRAMs designed for higher speeds."
DDR4 PHY IP is silicon-tested and available now. For more information on DDR IP, please visit http://ip.cadence.com/knowledgecenter/customize-main/ddr4-16ff
About Cadence
Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available here.
© 2014 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence and the Cadence logo are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.
For more information, please contact:
Cadence Design Systems, Inc.
408-944-7039
newsroom@cadence.com
Logo - http://photos.prnewswire.com/prnh/20140102/SF39436LOGO
SOURCE Cadence Design Systems, Inc.
Photo:http://photos.prnewswire.com/prnh/20140102/SF39436LOGO
http://photoarchive.ap.org/
Cadence Design Systems, Inc.
Web Site: http://www.cadence.com