Page All:
Page 1
CimatronE Reduces Cutting Time by Half for Danish Shop
Software to be shown at VTM trade show, Denmark, April 1-4, 2014
GIVAT SHMUEL, Israel, March 31, 2014 /PRNewswire/ --
Cimatron Limited [http://www.cimatron.com ] (NASDAQ: CIMT) announced today that its
acclaimed integrated CAD/CAM software, CimatronE, will be demonstrated at the booth of
reseller NTI CADcenter at the VTM trade show in Denmark, April 1-4, 2014, booth #5107.
CimatronE is used by many Danish manufacturers with great success. Among local
customers is the foundry company, Dansk Skalform, a fabricator of small and complex molded
thin-walled castings. The shop recently performed a cutting job using CimatronE with the
integrated VoluMill ultra-high performance machining technology. The cutting was performed
onsite together with tool vendor KJV and NTI CADcenter on the shop's CNC machine.
"CimatronE with VoluMill and the sidemilling tool from KJV gave us a fantastic new
setup for efficient roughing," said Peter Dissing, Dansk Skalform's CEO.
"It was amazing to see the amount of chips being cut from the stock in record time.
Cutting time was reduced by some 49% with the VoluMill technology and it was even possible
to increase the feed rate to 150% without pushing the machine or the cutting tool to its
limits."
Dansk Skalform started using CimatronE's new VoluMill at the end of 2013, but Mr.
Dissing says that the company has already benefitted from the decision: "We use CimatronE
with VoluMill as much as possible when performing rough operations. It sounds efficient,
runs effectively, and continues to help us reduce our costs."
CimatronE's VoluMill functionality will be demonstrated at VTM at the booth of NTI
CADcenter. CimatronE's other mold design and NC programming capabilities will also be
shown, including: parting, electrode, automated drilling, and 2.5-5 axis milling.
About Cimatron
With over 30 years of experience and more than 40,000 installations worldwide,
Cimatron is a leading provider of integrated, CAD/CAM software solutions for mold, tool
and die makers as well as manufacturers of discrete parts. Cimatron is committed to
providing comprehensive, cost-effective solutions that streamline manufacturing cycles and
ultimately shorten product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions
for mold design [http://www.cimatron.com/Main/general.aspx?FolderID)97&lang=EN ], die
design [http://www.cimatron.com/Main/general.aspx?FolderIDD70&lang=EN ], electrodes
design [http://www.cimatron.com/Main/general.aspx?FolderIDE15&lang=EN ], 2.5 to 5 axes
milling [http://www.cimatron.com/Main/general.aspx?FolderIDD71&lang=EN ], wire EDM
[http://www.gibbscam.com/solutions/gibbscam-modules/wire-edm ], turn
[http://www.gibbscam.com/solutions/gibbscam-modules/production-turning ], mill-turn
[http://www.gibbscam.com/solutions/gibbscam-modules/production-milling ], rotary milling
[http://www.gibbscam.com/solutions/gibbscam-modules ], multi-task machining
[http://www.gibbscam.com/solutions/gibbscam-modules ], and tombstone machining
[http://www.gibbscam.com/solutions/gibbscam-modules ]. Cimatron's subsidiaries and
extensive distribution network serve and support customers in the automotive, aerospace,
medical, consumer plastics, electronics, and other industries in over 40 countries
worldwide.
Cimatron's shares are publicly traded on the NASDAQ under the symbol CIMT. For more
information, visit http://www.cimatron.com
This press release includes forward looking statements, within the meaning of the
Private Securities Litigation Reform Act of 1995, which are subject to risk and
uncertainties that could cause actual results to differ materially from those anticipated.
Such statements may relate to Cimatron's plans, objectives and expected financial and
operating results. The words "may," "could," "would," "will," "believe," "anticipate,"
"estimate," "expect," "intend," "plan," and similar expressions or variations thereof are
intended to identify forward-looking statements. Investors are cautioned that any such
forward-looking statements are not guarantees of future performance and involve risks and
uncertainties, many of which are beyond Cimatron's ability to control. The risks and
uncertainties that may affect forward looking statements include, but are not limited to:
currency fluctuations, global economic and political conditions, marketing demand for
Cimatron products and services, long sales cycles, new product development, assimilating
future acquisitions, maintaining relationships with customers and partners, and increased
competition. For more details about the risks and uncertainties related to Cimatron's
business, refer to Cimatron's filings with the Securities and Exchange Commission.
Cimatron cannot assess the impact of or the extent to which any single factor or risk, or
combination of them, may cause. Cimatron undertakes no obligation to publicly update or
revise any forward looking statements, whether as a result of new information, future
events or otherwise.
For more information contact:
Ilan Erez
Chief Financial Officer
Cimatron Ltd.
Phone: +972-73-237-0114
ilane@cimatron.com
Idit Pass Lagziel
Marketing Manager
Cimatron Ltd.
Phone: +972-73-237-0298
iditp@cimatron.com
Investor Relations contact:
Ehud Helft/Kenny Green
GK Investor Relations
Tel: (US) +1-646-201-9246
cimatron@gkir.com
Cimatron Ltd
CimatronE Reduces Cutting Time by Half for Danish Shop
Software to be shown at VTM trade show, Denmark, April 1-4, 2014
GIVAT SHMUEL, Israel, March 31, 2014 /PRNewswire/ --
Cimatron Limited [http://www.cimatron.com ] (NASDAQ: CIMT) announced today that its
acclaimed integrated CAD/CAM software, CimatronE, will be demonstrated at the booth of
reseller NTI CADcenter at the VTM trade show in Denmark, April 1-4, 2014, booth #5107.
CimatronE is used by many Danish manufacturers with great success. Among local
customers is the foundry company, Dansk Skalform, a fabricator of small and complex molded
thin-walled castings. The shop recently performed a cutting job using CimatronE with the
integrated VoluMill ultra-high performance machining technology. The cutting was performed
onsite together with tool vendor KJV and NTI CADcenter on the shop's CNC machine.
"CimatronE with VoluMill and the sidemilling tool from KJV gave us a fantastic new
setup for efficient roughing," said Peter Dissing, Dansk Skalform's CEO.
"It was amazing to see the amount of chips being cut from the stock in record time.
Cutting time was reduced by some 49% with the VoluMill technology and it was even possible
to increase the feed rate to 150% without pushing the machine or the cutting tool to its
limits."
Dansk Skalform started using CimatronE's new VoluMill at the end of 2013, but Mr.
Dissing says that the company has already benefitted from the decision: "We use CimatronE
with VoluMill as much as possible when performing rough operations. It sounds efficient,
runs effectively, and continues to help us reduce our costs."
CimatronE's VoluMill functionality will be demonstrated at VTM at the booth of NTI
CADcenter. CimatronE's other mold design and NC programming capabilities will also be
shown, including: parting, electrode, automated drilling, and 2.5-5 axis milling.
About Cimatron
With over 30 years of experience and more than 40,000 installations worldwide,
Cimatron is a leading provider of integrated, CAD/CAM software solutions for mold, tool
and die makers as well as manufacturers of discrete parts. Cimatron is committed to
providing comprehensive, cost-effective solutions that streamline manufacturing cycles and
ultimately shorten product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions
for mold design [http://www.cimatron.com/Main/general.aspx?FolderID)97&lang=EN ], die
design [http://www.cimatron.com/Main/general.aspx?FolderIDD70&lang=EN ], electrodes
design [http://www.cimatron.com/Main/general.aspx?FolderIDE15&lang=EN ], 2.5 to 5 axes
milling [http://www.cimatron.com/Main/general.aspx?FolderIDD71&lang=EN ], wire EDM
[http://www.gibbscam.com/solutions/gibbscam-modules/wire-edm ], turn
[http://www.gibbscam.com/solutions/gibbscam-modules/production-turning ], mill-turn
[http://www.gibbscam.com/solutions/gibbscam-modules/production-milling ], rotary milling
[http://www.gibbscam.com/solutions/gibbscam-modules ], multi-task machining
[http://www.gibbscam.com/solutions/gibbscam-modules ], and tombstone machining
[http://www.gibbscam.com/solutions/gibbscam-modules ]. Cimatron's subsidiaries and
extensive distribution network serve and support customers in the automotive, aerospace,
medical, consumer plastics, electronics, and other industries in over 40 countries
worldwide.
Cimatron's shares are publicly traded on the NASDAQ under the symbol CIMT. For more
information, visit http://www.cimatron.com
This press release includes forward looking statements, within the meaning of the
Private Securities Litigation Reform Act of 1995, which are subject to risk and
uncertainties that could cause actual results to differ materially from those anticipated.
Such statements may relate to Cimatron's plans, objectives and expected financial and
operating results. The words "may," "could," "would," "will," "believe," "anticipate,"
"estimate," "expect," "intend," "plan," and similar expressions or variations thereof are
intended to identify forward-looking statements. Investors are cautioned that any such
forward-looking statements are not guarantees of future performance and involve risks and
uncertainties, many of which are beyond Cimatron's ability to control. The risks and
uncertainties that may affect forward looking statements include, but are not limited to:
currency fluctuations, global economic and political conditions, marketing demand for
Cimatron products and services, long sales cycles, new product development, assimilating
future acquisitions, maintaining relationships with customers and partners, and increased
competition. For more details about the risks and uncertainties related to Cimatron's
business, refer to Cimatron's filings with the Securities and Exchange Commission.
Cimatron cannot assess the impact of or the extent to which any single factor or risk, or
combination of them, may cause. Cimatron undertakes no obligation to publicly update or
revise any forward looking statements, whether as a result of new information, future
events or otherwise.
For more information contact:
Ilan Erez
Chief Financial Officer
Cimatron Ltd.
Phone: +972-73-237-0114
ilane@cimatron.com
Idit Pass Lagziel
Marketing Manager
Cimatron Ltd.
Phone: +972-73-237-0298
iditp@cimatron.com
Investor Relations contact:
Ehud Helft/Kenny Green
GK Investor Relations
Tel: (US) +1-646-201-9246
cimatron@gkir.com
Cimatron Ltd