Page All:
Page 1
CimatronE & GibbsCAM Powering Russian Aircraft Manufacturing
Software to be showcased at Interplastica trade show, Moscow
GIVAT SHMUEL, Israel, January 23, 2014 /PRNewswire/ --
Cimatron Limited [http://www.cimatron.com ] (NASDAQ: CIMT) today announced that its
CimatronE and GibbsCAM software solutions will be demonstrated at the Interplastica trade
show, Moscow, Russia, from January 28-31, 2014.
Among the large number of tool shops and manufacturers across Russia that use
CimatronE and GibbsCAM is the CAD/CAM Center at the Samara State Aerospace University, a
leading contractor for the manufacture of aeronautical parts.
The Center uses both software solutions to manufacture a wide range of complex
aeronautical parts on its continuous milling and mill-turn machines for its commercial
clients. Its production range includes impellers, turbine blades, hydraulic cylinders,
landing gears, mold cores and cavities, and 3-5 axis discrete parts.
Dr Oleg Surkov, the Center's director and an associate professor of aircraft engine
manufacturing at the University, noted:
"The Center's tasks are many and varied and the CAD/CAM programs we use have to be
both reliable and robust given the fine detail involved in producing often complex, high
quality aircraft components. CimatronE and GibbsCAM successfully address our needs,
providing us with excellent machining results within our often tight timeframes.
"One of the major benefits of CimatronE is its 3+2 axis programming, especially
multidirectional stock. This enables us to machine parts in the one set-up, helping to
maximize the use of our machines and reduce the possibility of mistakes. It's also saved
us hours in programming and machining time.
"GibbsCAM is successfully used for our mill-turn operations. We've also benefitted
greatly from the optimized toolpaths that we can create in the software, thanks to its
true simulation and full control over the machining process. GibbsCAM also provides us
with a reliable library of post-processors for our machining tasks."
The CimatronE and GibbsCAM demonstrations at Interplastica will be held at the booth
of reseller Bee-Pitron, hall 8, booth 83B02.
About Cimatron
With over 30 years of experience and more than 40,000 installations worldwide,
Cimatron is a leading provider of integrated, CAD/CAM software solutions for mold, tool
and die makers as well as manufacturers of discrete parts. Cimatron is committed to
providing comprehensive, cost-effective solutions that streamline manufacturing cycles and
ultimately shorten product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions
for mold design [http://www.cimatron.com/Main/general.aspx?FolderID)97&lang=EN ], die
design [http://www.cimatron.com/Main/general.aspx?FolderIDD70&lang=EN ], electrodes
design [http://www.cimatron.com/Main/general.aspx?FolderIDE15&lang=EN ], 2.5 to 5 axes
milling [http://www.cimatron.com/Main/general.aspx?FolderIDD71&lang=EN ], wire EDM
[http://www.gibbscam.com/solutions/gibbscam-modules ], turn
[http://www.gibbscam.com/solutions/gibbscam-modules ], mill-turn
[http://www.gibbscam.com/solutions/gibbscam-modules ], rotary milling
[http://www.gibbscam.com/solutions/gibbscam-modules ], multi-task machining
[http://www.gibbscam.com/solutions/gibbscam-modules ], and tombstone machining
[http://www.gibbscam.com/solutions/gibbscam-modules ]. Cimatron's subsidiaries and
extensive distribution network serve and support customers in the automotive, aerospace,
medical, consumer plastics, electronics, and other industries in over 40 countries
worldwide.
Cimatron's shares are publicly traded on the NASDAQ under the symbol CIMT. For more
information, visit http://www.cimatron.com
This press release includes forward looking statements, within the meaning of the
Private Securities Litigation Reform Act of 1995, which are subject to risk and
uncertainties that could cause actual results to differ materially from those anticipated.
Such statements may relate to Cimatron's plans, objectives and expected financial and
operating results. The words "may," "could," "would," "will," "believe," "anticipate,"
"estimate," "expect," "intend," "plan," and similar expressions or variations thereof are
intended to identify forward-looking statements. Investors are cautioned that any such
forward-looking statements are not guarantees of future performance and involve risks and
uncertainties, many of which are beyond Cimatron's ability to control. The risks and
uncertainties that may affect forward looking statements include, but are not limited to:
currency fluctuations, global economic and political conditions, marketing demand for
Cimatron products and services, long sales cycles, new product development, assimilating
future acquisitions, maintaining relationships with customers and partners, and increased
competition. For more details about the risks and uncertainties related to Cimatron's
business, refer to Cimatron's filings with the Securities and Exchange Commission.
Cimatron cannot assess the impact of or the extent to which any single factor or risk, or
combination of them, may cause. Cimatron undertakes no obligation to publicly update or
revise any forward looking statements, whether as a result of new information, future
events or otherwise.
For More Information Contact:
Ilan Erez
Chief Financial Officer
Cimatron Ltd.
Phone: +972-73-237-0114
ilane@cimatron.com
Idit Pass Lagziel
Marketing Manager
Cimatron Ltd.
Phone: +972-73-237-0298
iditp@cimatron.com
Investor Relations contact:
Ehud Helft/Kenny Green
CCG Investor Relations
Tel: (US) +1-646-201-9246
Cimatron@ccgisrael.com
Cimatron Ltd
CimatronE & GibbsCAM Powering Russian Aircraft Manufacturing
Software to be showcased at Interplastica trade show, Moscow
GIVAT SHMUEL, Israel, January 23, 2014 /PRNewswire/ --
Cimatron Limited [http://www.cimatron.com ] (NASDAQ: CIMT) today announced that its
CimatronE and GibbsCAM software solutions will be demonstrated at the Interplastica trade
show, Moscow, Russia, from January 28-31, 2014.
Among the large number of tool shops and manufacturers across Russia that use
CimatronE and GibbsCAM is the CAD/CAM Center at the Samara State Aerospace University, a
leading contractor for the manufacture of aeronautical parts.
The Center uses both software solutions to manufacture a wide range of complex
aeronautical parts on its continuous milling and mill-turn machines for its commercial
clients. Its production range includes impellers, turbine blades, hydraulic cylinders,
landing gears, mold cores and cavities, and 3-5 axis discrete parts.
Dr Oleg Surkov, the Center's director and an associate professor of aircraft engine
manufacturing at the University, noted:
"The Center's tasks are many and varied and the CAD/CAM programs we use have to be
both reliable and robust given the fine detail involved in producing often complex, high
quality aircraft components. CimatronE and GibbsCAM successfully address our needs,
providing us with excellent machining results within our often tight timeframes.
"One of the major benefits of CimatronE is its 3+2 axis programming, especially
multidirectional stock. This enables us to machine parts in the one set-up, helping to
maximize the use of our machines and reduce the possibility of mistakes. It's also saved
us hours in programming and machining time.
"GibbsCAM is successfully used for our mill-turn operations. We've also benefitted
greatly from the optimized toolpaths that we can create in the software, thanks to its
true simulation and full control over the machining process. GibbsCAM also provides us
with a reliable library of post-processors for our machining tasks."
The CimatronE and GibbsCAM demonstrations at Interplastica will be held at the booth
of reseller Bee-Pitron, hall 8, booth 83B02.
About Cimatron
With over 30 years of experience and more than 40,000 installations worldwide,
Cimatron is a leading provider of integrated, CAD/CAM software solutions for mold, tool
and die makers as well as manufacturers of discrete parts. Cimatron is committed to
providing comprehensive, cost-effective solutions that streamline manufacturing cycles and
ultimately shorten product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions
for mold design [http://www.cimatron.com/Main/general.aspx?FolderID)97&lang=EN ], die
design [http://www.cimatron.com/Main/general.aspx?FolderIDD70&lang=EN ], electrodes
design [http://www.cimatron.com/Main/general.aspx?FolderIDE15&lang=EN ], 2.5 to 5 axes
milling [http://www.cimatron.com/Main/general.aspx?FolderIDD71&lang=EN ], wire EDM
[http://www.gibbscam.com/solutions/gibbscam-modules ], turn
[http://www.gibbscam.com/solutions/gibbscam-modules ], mill-turn
[http://www.gibbscam.com/solutions/gibbscam-modules ], rotary milling
[http://www.gibbscam.com/solutions/gibbscam-modules ], multi-task machining
[http://www.gibbscam.com/solutions/gibbscam-modules ], and tombstone machining
[http://www.gibbscam.com/solutions/gibbscam-modules ]. Cimatron's subsidiaries and
extensive distribution network serve and support customers in the automotive, aerospace,
medical, consumer plastics, electronics, and other industries in over 40 countries
worldwide.
Cimatron's shares are publicly traded on the NASDAQ under the symbol CIMT. For more
information, visit http://www.cimatron.com
This press release includes forward looking statements, within the meaning of the
Private Securities Litigation Reform Act of 1995, which are subject to risk and
uncertainties that could cause actual results to differ materially from those anticipated.
Such statements may relate to Cimatron's plans, objectives and expected financial and
operating results. The words "may," "could," "would," "will," "believe," "anticipate,"
"estimate," "expect," "intend," "plan," and similar expressions or variations thereof are
intended to identify forward-looking statements. Investors are cautioned that any such
forward-looking statements are not guarantees of future performance and involve risks and
uncertainties, many of which are beyond Cimatron's ability to control. The risks and
uncertainties that may affect forward looking statements include, but are not limited to:
currency fluctuations, global economic and political conditions, marketing demand for
Cimatron products and services, long sales cycles, new product development, assimilating
future acquisitions, maintaining relationships with customers and partners, and increased
competition. For more details about the risks and uncertainties related to Cimatron's
business, refer to Cimatron's filings with the Securities and Exchange Commission.
Cimatron cannot assess the impact of or the extent to which any single factor or risk, or
combination of them, may cause. Cimatron undertakes no obligation to publicly update or
revise any forward looking statements, whether as a result of new information, future
events or otherwise.
For More Information Contact:
Ilan Erez
Chief Financial Officer
Cimatron Ltd.
Phone: +972-73-237-0114
ilane@cimatron.com
Idit Pass Lagziel
Marketing Manager
Cimatron Ltd.
Phone: +972-73-237-0298
iditp@cimatron.com
Investor Relations contact:
Ehud Helft/Kenny Green
CCG Investor Relations
Tel: (US) +1-646-201-9246
Cimatron@ccgisrael.com
Cimatron Ltd