Microsemi Unveils Highest Density Combination SynchE/IEEE1588-2008 Timing Devices for Wireless Infrastructure and Mobile Backhaul Applications
Poster: SySAdmin
Posted on August 8, 2013 at 6:14:01 AM
Microsemi Unveils Highest Density Combination SynchE/IEEE1588-2008 Timing Devices for Wireless Infrastructure and Mobile Backhaul Applications
Innovative New Single-chip Solutions Further Solidify Microsemi's No. 1 Market Position in Network Timing Semiconductor Solutions
ALISO VIEJO, Calif., Aug. 8, 2013 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced the highest density family of single-chip timing card devices with support for both Synchronous Ethernet (SyncE) and IEEE 1588-2008 packet networks including 4G and LTE applications. The highly integrated ZL30361, ZL30362 and ZL30363 provide all of the key elements required for wireless network synchronization including support for phase and frequency. The market-leading devices are available today and are currently being designed into wireless backhaul products where phase synchronization performance is crucial.
(Logo: http://photos.prnewswire.com/prnh/20110909/MM66070LOGO)
Microsemi's new timing devices provide the highest level of flexibility, smallest footprint (13mm x 13mm) and lowest cost compared to alternative solutions. Key features include the availability of up to four independent timing channels; each channel can be configured to support any electrical or packet mode of operation. This allows for the simultaneous support for GPS, SyncE and IEEE1588-2008 timing. As a result, these devices can be used to enhance or to replace GPS timing in wireless infrastructure at a lower cost.
"Our new SyncE/IEEE1588 solutions provide customers with a highly compelling value proposition and very flexible architecture as evidenced by several product design-ins already in development by leading telecom companies," said Maamoun Seido, vice president of Microsemi's Timing Products group. "These offerings are indicative of the innovative products that have made us the No. 1 provider of network timing semiconductor solutions globally, and the new products in our pipeline will help solidify our leadership position."
SyncE and IEEE 1588-2008 technologies allow carriers to improve synchronization and performance in packet-switching networks including the fast-growing 4G and LTE segment, which, according to a report from market research firm Infonetics, is rising from $8 billion in 2012 to a forecasted $17 billion in 2016.
About the New Timing Devices
Microsemi's new SyncE/IEEE1588 timing solutions features multiple digital phase locked loops (DPLL) tailored for wireless infrastructure and mobile backhaul networks. The ZL30362 has four highly programmable multi-function DPLLs, coupled with four independent synthesizers capable of generating multiple independent frequencies to directly drive both 1 Gigabit Ethernet (GbE) and 10GbE physical layers (PHYs). The ZL30361 and ZL30363 timing card devices feature single and dual multi-function DPLLs, coupled with three and four high performance synthesizers, respectively.
The ZL30361, ZL30362 and ZL30363 are based on Microsemi's unique two stage ClockCenter(TM) architecture which supports any rate-to-any rate frequency translation from 1Hz to 750MHz, including GPS 1 pulse per second (pps) input. Microsemi has added standards-compliant IEEE 1588-2008 protocol with Clock Recovery Servo to the devices, which are Microsemi's third-generation packet timing solution, field-proven over many years with multiple equipment vendors and carriers.
Microsemi ZL30362 is the only timing device available today that meets the requirement of at least three independent timing channels to efficiently support the emerging boundary clock standard. Support for Slave Only Ordinary Clock, Ordinary Clock and Boundary Clock is also offered with a focus on phase performance for rapidly growing LTE and LTE-A markets. Microsemi has proven performance down to 200ns over G.8261 networks and down to 100ns over for boundary clock networks using G.8261 test conditions.
To future-proof designs, new standards such as the upcoming telecom profile for Phase will be supported through a simple software upgrade. The standards-compliant timing card devices have also passed interoperability testing at the ISPCS interoperability conference. Each device can also lock to four separate IEEE1588 Grand Masters and provide hitless reference switching between them or any electrical reference.
With jitter capable of driving both 1G and 10GbE PHYs directly there is no need for expensive jitter attenuators. The packaging used by Microsemi offers a 50 percent smaller footprint than competitor solutions and combines this with significant power savings, a key element in today's drive for "green" focused equipment.
About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance, radiation-hardened and highly reliable analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,000 employees globally. Learn more at http://www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to the highest density family of single-chip timing card devices with support for both Synchronous Ethernet (SyncE) and IEEE 1588-2008 packet networks including 4G and LTE applications, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
MSCCP
SOURCE Microsemi Corporation
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Microsemi Corporation
CONTACT: Gwen Carlson, Director of Corporate Communications, 949-380-6135, or Beth P. Quezada, Communications Specialist, 949-380-6102, press@microsemi.com
Web Site: http://www.microsemi.com
Innovative New Single-chip Solutions Further Solidify Microsemi's No. 1 Market Position in Network Timing Semiconductor Solutions
ALISO VIEJO, Calif., Aug. 8, 2013 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced the highest density family of single-chip timing card devices with support for both Synchronous Ethernet (SyncE) and IEEE 1588-2008 packet networks including 4G and LTE applications. The highly integrated ZL30361, ZL30362 and ZL30363 provide all of the key elements required for wireless network synchronization including support for phase and frequency. The market-leading devices are available today and are currently being designed into wireless backhaul products where phase synchronization performance is crucial.
(Logo: http://photos.prnewswire.com/prnh/20110909/MM66070LOGO)
Microsemi's new timing devices provide the highest level of flexibility, smallest footprint (13mm x 13mm) and lowest cost compared to alternative solutions. Key features include the availability of up to four independent timing channels; each channel can be configured to support any electrical or packet mode of operation. This allows for the simultaneous support for GPS, SyncE and IEEE1588-2008 timing. As a result, these devices can be used to enhance or to replace GPS timing in wireless infrastructure at a lower cost.
"Our new SyncE/IEEE1588 solutions provide customers with a highly compelling value proposition and very flexible architecture as evidenced by several product design-ins already in development by leading telecom companies," said Maamoun Seido, vice president of Microsemi's Timing Products group. "These offerings are indicative of the innovative products that have made us the No. 1 provider of network timing semiconductor solutions globally, and the new products in our pipeline will help solidify our leadership position."
SyncE and IEEE 1588-2008 technologies allow carriers to improve synchronization and performance in packet-switching networks including the fast-growing 4G and LTE segment, which, according to a report from market research firm Infonetics, is rising from $8 billion in 2012 to a forecasted $17 billion in 2016.
About the New Timing Devices
Microsemi's new SyncE/IEEE1588 timing solutions features multiple digital phase locked loops (DPLL) tailored for wireless infrastructure and mobile backhaul networks. The ZL30362 has four highly programmable multi-function DPLLs, coupled with four independent synthesizers capable of generating multiple independent frequencies to directly drive both 1 Gigabit Ethernet (GbE) and 10GbE physical layers (PHYs). The ZL30361 and ZL30363 timing card devices feature single and dual multi-function DPLLs, coupled with three and four high performance synthesizers, respectively.
The ZL30361, ZL30362 and ZL30363 are based on Microsemi's unique two stage ClockCenter(TM) architecture which supports any rate-to-any rate frequency translation from 1Hz to 750MHz, including GPS 1 pulse per second (pps) input. Microsemi has added standards-compliant IEEE 1588-2008 protocol with Clock Recovery Servo to the devices, which are Microsemi's third-generation packet timing solution, field-proven over many years with multiple equipment vendors and carriers.
Microsemi ZL30362 is the only timing device available today that meets the requirement of at least three independent timing channels to efficiently support the emerging boundary clock standard. Support for Slave Only Ordinary Clock, Ordinary Clock and Boundary Clock is also offered with a focus on phase performance for rapidly growing LTE and LTE-A markets. Microsemi has proven performance down to 200ns over G.8261 networks and down to 100ns over for boundary clock networks using G.8261 test conditions.
To future-proof designs, new standards such as the upcoming telecom profile for Phase will be supported through a simple software upgrade. The standards-compliant timing card devices have also passed interoperability testing at the ISPCS interoperability conference. Each device can also lock to four separate IEEE1588 Grand Masters and provide hitless reference switching between them or any electrical reference.
With jitter capable of driving both 1G and 10GbE PHYs directly there is no need for expensive jitter attenuators. The packaging used by Microsemi offers a 50 percent smaller footprint than competitor solutions and combines this with significant power savings, a key element in today's drive for "green" focused equipment.
About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance, radiation-hardened and highly reliable analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,000 employees globally. Learn more at http://www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to the highest density family of single-chip timing card devices with support for both Synchronous Ethernet (SyncE) and IEEE 1588-2008 packet networks including 4G and LTE applications, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
MSCCP
SOURCE Microsemi Corporation
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Microsemi Corporation
CONTACT: Gwen Carlson, Director of Corporate Communications, 949-380-6135, or Beth P. Quezada, Communications Specialist, 949-380-6102, press@microsemi.com
Web Site: http://www.microsemi.com