LTE/3G Multimode RF Transceiver from Maxim Integrated Enables Successful Deployment of HetNet Small Cell Base Stations
Poster: SySAdmin
Posted on February 18, 2013 at 9:07:01 AM
LTE/3G Multimode RF Transceiver from Maxim Integrated Enables Successful Deployment of HetNet Small Cell Base Stations
Maxim's 3rd generation, highly integrated, LTE/3G small cell RF transceiver supports all major cellular bands; complete reference designs for indoor and outdoor applications speed development.
SAN JOSE, Calif., Feb. 18, 2013 /PRNewswire/ -- Maxim Integrated Products, Inc. (NASDAQ: MXIM) today introduced the MAX2580*, a single-chip multistandard RF to Bits® small cell radio transceiver. This highly integrated solution requires very few external components to execute an all-band, multimode, multiple-input multiple-output (MIMO) radio design. The MAX2580 design package also includes full system-level reference designs to shorten time to market. This RF transceiver is ideal for mobile operators planning residential, enterprise, or outdoor small cell deployments in their next-generation heterogeneous networks (HetNet).
Anticipating the needs of next-generation HetNet solutions, the MAX2580 provides wideband frequency coverage with programmable channel bandwidths to support all LTE/3G bands and modes. In a single device, the MAX2580 integrates a complete 2x2 MIMO RF front-end, including fractional-N frequency synthesizers, high-speed data converters, and channel selection filters. Additionally, the MAX2580 features a standard JESD207 data interface to facilitate seamless connectivity with multicore LTE baseband processors.
Key Advantages
-- High-performance radio: supports all LTE bands from Band 1 to Band 41
with selectable channel bandwidths from 1.4MHz to 20MHz; supports
FDD-LTE, TD-LTE and WCDMA modes; enables the full breadth of indoor and
outdoor small cell solutions
-- High integration: 2x2 MIMO RF to Bits architecture; integrates complete
RF front-end, IF amplifiers, fractional-N synthesizers, all decimation,
interpolation and channel selection filters, plus a parallel JESD207
data interface; the power amplifier (PA) pre-driver delivers 0dBm output
power level
-- Fast time to market: full system-level reference designs available for
indoor and outdoor applications
Industry Commentary
-- "Maxim's latest LTE/3G transceiver continues to showcase our relentless
focus on delivering highly integrated and high-performance RF solutions
for small cell base stations," said Vickram Vathulya, Managing Director
of RF Solutions at Maxim Integrated. "As small cell deployments expand
from consumer to enterprise and outdoor applications, we are well
aligned with our ecosystem partners to deliver fully qualified reference
designs and accelerate our customer design lifecycles."
-- "As mobile operators transition from high-mobility 2G voice coverage to
high-capacity LTE/3G mobile data coverage, cost drivers and capacity
constraints will motivate them to implement heterogeneous networks,
including multimode small cells," said Joe Madden, Principal Analyst at
Mobile Experts.
Availability and Pricing
MAX2580 is the newest LTE/3G small cell transceiver following the MAX2550-MAX2553 WCDMA and cdma2000® small cell transceivers. The MAX2580 is sampling now to qualified customers and will be available in the second half of 2013. For a hi-res image, click here. Contact factory for pricing.
Mobile World Congress 2013
The MAX2580 will be on display at Maxim's stand at Mobile World Congress 2013 in Barcelona, Spain on February 25-28. Maxim will be located in Hall 6 Stand 6G100. For more information, please visit http://www.mobileworldcongress.com.
About Maxim Integrated
At Maxim Integrated, we put analog together in a way that sets our customers apart. In Fiscal 2012, we reported revenues of $2.4 billion.
Follow Maxim Integrated on Twitter at https://twitter.com/Maxim_IC and on Facebook at http://www.facebook.com/Maxim.IC.
RF to Bits is a registered trademark and registered service mark of Maxim Integrated Products, Inc. All other trademarks are the property of their respective owners.
*Future product -- contact factory for availability.
SOURCE Maxim Integrated
Maxim Integrated
CONTACT: Ferda Millan, +1-408-373-1854, ferda.millan@maximintegrated.com
Web Site: http://www.maximintegrated.com/
Maxim's 3rd generation, highly integrated, LTE/3G small cell RF transceiver supports all major cellular bands; complete reference designs for indoor and outdoor applications speed development.
SAN JOSE, Calif., Feb. 18, 2013 /PRNewswire/ -- Maxim Integrated Products, Inc. (NASDAQ: MXIM) today introduced the MAX2580*, a single-chip multistandard RF to Bits® small cell radio transceiver. This highly integrated solution requires very few external components to execute an all-band, multimode, multiple-input multiple-output (MIMO) radio design. The MAX2580 design package also includes full system-level reference designs to shorten time to market. This RF transceiver is ideal for mobile operators planning residential, enterprise, or outdoor small cell deployments in their next-generation heterogeneous networks (HetNet).
Anticipating the needs of next-generation HetNet solutions, the MAX2580 provides wideband frequency coverage with programmable channel bandwidths to support all LTE/3G bands and modes. In a single device, the MAX2580 integrates a complete 2x2 MIMO RF front-end, including fractional-N frequency synthesizers, high-speed data converters, and channel selection filters. Additionally, the MAX2580 features a standard JESD207 data interface to facilitate seamless connectivity with multicore LTE baseband processors.
Key Advantages
-- High-performance radio: supports all LTE bands from Band 1 to Band 41
with selectable channel bandwidths from 1.4MHz to 20MHz; supports
FDD-LTE, TD-LTE and WCDMA modes; enables the full breadth of indoor and
outdoor small cell solutions
-- High integration: 2x2 MIMO RF to Bits architecture; integrates complete
RF front-end, IF amplifiers, fractional-N synthesizers, all decimation,
interpolation and channel selection filters, plus a parallel JESD207
data interface; the power amplifier (PA) pre-driver delivers 0dBm output
power level
-- Fast time to market: full system-level reference designs available for
indoor and outdoor applications
Industry Commentary
-- "Maxim's latest LTE/3G transceiver continues to showcase our relentless
focus on delivering highly integrated and high-performance RF solutions
for small cell base stations," said Vickram Vathulya, Managing Director
of RF Solutions at Maxim Integrated. "As small cell deployments expand
from consumer to enterprise and outdoor applications, we are well
aligned with our ecosystem partners to deliver fully qualified reference
designs and accelerate our customer design lifecycles."
-- "As mobile operators transition from high-mobility 2G voice coverage to
high-capacity LTE/3G mobile data coverage, cost drivers and capacity
constraints will motivate them to implement heterogeneous networks,
including multimode small cells," said Joe Madden, Principal Analyst at
Mobile Experts.
Availability and Pricing
MAX2580 is the newest LTE/3G small cell transceiver following the MAX2550-MAX2553 WCDMA and cdma2000® small cell transceivers. The MAX2580 is sampling now to qualified customers and will be available in the second half of 2013. For a hi-res image, click here. Contact factory for pricing.
Mobile World Congress 2013
The MAX2580 will be on display at Maxim's stand at Mobile World Congress 2013 in Barcelona, Spain on February 25-28. Maxim will be located in Hall 6 Stand 6G100. For more information, please visit http://www.mobileworldcongress.com.
About Maxim Integrated
At Maxim Integrated, we put analog together in a way that sets our customers apart. In Fiscal 2012, we reported revenues of $2.4 billion.
Follow Maxim Integrated on Twitter at https://twitter.com/Maxim_IC and on Facebook at http://www.facebook.com/Maxim.IC.
RF to Bits is a registered trademark and registered service mark of Maxim Integrated Products, Inc. All other trademarks are the property of their respective owners.
*Future product -- contact factory for availability.
SOURCE Maxim Integrated
Maxim Integrated
CONTACT: Ferda Millan, +1-408-373-1854, ferda.millan@maximintegrated.com
Web Site: http://www.maximintegrated.com/