Industry's Smallest Bipolar, Beyond-the-Rails ADCs from Maxim Integrated Have an Internal Reference and Save Designers at Least 88% Board Space
Poster: SySAdmin
Posted on December 12, 2012 at 9:21:01 AM
Industry's Smallest Bipolar, Beyond-the-Rails ADCs from Maxim Integrated Have an Internal Reference and Save Designers at Least 88% Board Space
Maxim's highly integrated 16-bit ADCs offer lower power and high integration for precision measurement applications.
SAN JOSE, Calif., Dec. 12, 2012 /PRNewswire/ -- Maxim Integrated Products, Inc. (NASDAQ: MXIM) today announced that it is now shipping the MAX11166 and MAX11167, the industry's smallest bipolar +/-5V, 16-bit analog-to-digital converters (ADCs). Available in a tiny 9mm(2) package, the MAX11166 and MAX11167 are the only 12-pin 16-bit bipolar ADCs to integrate an internal reference with buffer, saving cost and at least 88% board space over competing solutions. These highly integrated ADCs feature Beyond-the-Rails(TM) technology, which supports +/-5V input signal from a single positive 5V rail. This technology eliminates the need for negative power supplies and simplifies designs. At 19.5mW, 500ksps, and 1uA in shutdown mode, the ADCs are applicable for precision measurement data acquisition systems (DASs), industrial/process control, medical instrumentation, and automatic test equipment (ATE).
(Logo: http://photos.prnewswire.com/prnh/20120912/SF71654LOGO)
The MAX11166 and MAX11167 communicate using an SPI-compatible serial interface at 2.5V, 3V, 3.3V, or 5V logic levels and have sample rates of 500ksps and 250ksps, respectively. The serial interface can be used to daisy-chain multiple ADCs for multichannel simultaneous-sampling applications; it also provides a "busy" indicator option for simplified system synchronization and timing. Maxim's proprietary input-charge-pump architecture allows direct sampling of high-impedance sources, eliminating the need for external analog buffers to drive the ADC inputs in some applications.
Key Advantages
-- High integration: industry's smallest (9mm(2)) package, 16-bit ADCs with
integrated reference with buffer and +/-5V true bipolar measurement
above and below ground using Beyond-the-Rails technology
-- Excellent analog performance: 92.6dB SNR supports wide-dynamic-range
applications with best-in-class linearity (typically +/-0.5 LSB INL,
+/-0.2 LSB DNL) allows precise measurements at half the power of nearest
competitors
-- Ease of design: integrated precision voltage reference with reference
buffer and high-impedance input saves power and space
Industry Commentary
-- "Maxim is the only company to offer an internal reference in a tiny
16-bit bipolar ADC," said Martin Mason, Executive Director of ADC
Business Management at Maxim Integrated. "By integrating the reference
and offering bipolar inputs in a tiny part, engineers save the power,
space, and cost of doing this externally."
-- "Previously, engineers had to measure a true bipolar signal with a good
amount of external circuitry," said Susie Inouye, Research Director at
Databeans. "The MAX11166 and MAX11167 family offers a great combination
of small size and wide input range, and the internal reference lets
engineers simplify their designs."
Availability, Temperature, and Pricing
-- Available in a robust 12-pin package (3mm x 3mm TDFN), +/-5V input,
250ksps and 500ksps options
-- Specified over the -40 degrees C to +85 degrees C temperature range
-- Pricing starts at $16.07 (1000-up, FOB USA)
The 18-bit extended resolution versions of these parts are slated for introduction in the first half of 2013.
For more details, please click here. For a hi-res image, click here.
About Maxim Integrated
At Maxim Integrated, we put analog together in a way that sets our customers apart. In Fiscal 2012, we reported revenues of $2.4 billion.
Beyond-the-Rails is a trademark of Maxim Integrated Products, Inc.
Contact: Ferda Millan
(408) 601-5429
ferda.millan@maximintegrated.com
SOURCE Maxim Integrated Products, Inc.
Photo:http://photos.prnewswire.com/prnh/20120912/SF71654LOGO
http://photoarchive.ap.org/
Maxim Integrated Products, Inc.
Web Site: http://www.maximintegrated.com
Maxim's highly integrated 16-bit ADCs offer lower power and high integration for precision measurement applications.
SAN JOSE, Calif., Dec. 12, 2012 /PRNewswire/ -- Maxim Integrated Products, Inc. (NASDAQ: MXIM) today announced that it is now shipping the MAX11166 and MAX11167, the industry's smallest bipolar +/-5V, 16-bit analog-to-digital converters (ADCs). Available in a tiny 9mm(2) package, the MAX11166 and MAX11167 are the only 12-pin 16-bit bipolar ADCs to integrate an internal reference with buffer, saving cost and at least 88% board space over competing solutions. These highly integrated ADCs feature Beyond-the-Rails(TM) technology, which supports +/-5V input signal from a single positive 5V rail. This technology eliminates the need for negative power supplies and simplifies designs. At 19.5mW, 500ksps, and 1uA in shutdown mode, the ADCs are applicable for precision measurement data acquisition systems (DASs), industrial/process control, medical instrumentation, and automatic test equipment (ATE).
(Logo: http://photos.prnewswire.com/prnh/20120912/SF71654LOGO)
The MAX11166 and MAX11167 communicate using an SPI-compatible serial interface at 2.5V, 3V, 3.3V, or 5V logic levels and have sample rates of 500ksps and 250ksps, respectively. The serial interface can be used to daisy-chain multiple ADCs for multichannel simultaneous-sampling applications; it also provides a "busy" indicator option for simplified system synchronization and timing. Maxim's proprietary input-charge-pump architecture allows direct sampling of high-impedance sources, eliminating the need for external analog buffers to drive the ADC inputs in some applications.
Key Advantages
-- High integration: industry's smallest (9mm(2)) package, 16-bit ADCs with
integrated reference with buffer and +/-5V true bipolar measurement
above and below ground using Beyond-the-Rails technology
-- Excellent analog performance: 92.6dB SNR supports wide-dynamic-range
applications with best-in-class linearity (typically +/-0.5 LSB INL,
+/-0.2 LSB DNL) allows precise measurements at half the power of nearest
competitors
-- Ease of design: integrated precision voltage reference with reference
buffer and high-impedance input saves power and space
Industry Commentary
-- "Maxim is the only company to offer an internal reference in a tiny
16-bit bipolar ADC," said Martin Mason, Executive Director of ADC
Business Management at Maxim Integrated. "By integrating the reference
and offering bipolar inputs in a tiny part, engineers save the power,
space, and cost of doing this externally."
-- "Previously, engineers had to measure a true bipolar signal with a good
amount of external circuitry," said Susie Inouye, Research Director at
Databeans. "The MAX11166 and MAX11167 family offers a great combination
of small size and wide input range, and the internal reference lets
engineers simplify their designs."
Availability, Temperature, and Pricing
-- Available in a robust 12-pin package (3mm x 3mm TDFN), +/-5V input,
250ksps and 500ksps options
-- Specified over the -40 degrees C to +85 degrees C temperature range
-- Pricing starts at $16.07 (1000-up, FOB USA)
The 18-bit extended resolution versions of these parts are slated for introduction in the first half of 2013.
For more details, please click here. For a hi-res image, click here.
About Maxim Integrated
At Maxim Integrated, we put analog together in a way that sets our customers apart. In Fiscal 2012, we reported revenues of $2.4 billion.
Beyond-the-Rails is a trademark of Maxim Integrated Products, Inc.
Contact: Ferda Millan
(408) 601-5429
ferda.millan@maximintegrated.com
SOURCE Maxim Integrated Products, Inc.
Photo:http://photos.prnewswire.com/prnh/20120912/SF71654LOGO
http://photoarchive.ap.org/
Maxim Integrated Products, Inc.
Web Site: http://www.maximintegrated.com