Objet Adds New Improved Rigid Black Material and 16 New Rigid/Rubber-like Composites Bringing the Full Objet Range to 123 Materials
Poster: SySAdmin
Posted on November 21, 2012 at 9:49:02 AM
Objet Adds New Improved Rigid Black Material and 16 New Rigid/Rubber-like Composites Bringing the Full Objet Range to 123 Materials
REHOVOT, Israel, November 21, 2012 /PRNewswire/ --
- New Rigid Black material enables printing of 3D models with enhanced
dimensional stability and surface smoothness.
- New Objet Digital Material composites can simulate polypropylene and range of
flexibilities from Shore 27 - 95.
Objet Ltd [http://www.objet.com ]., the innovation leader in 3D printing
[http://www.youtube.com/watch?v=mX6G-TluQHE&feature=plcp ] for rapid prototyping
[http://objet.com/knowledge-center/rapid-prototyping ] and additive manufacturing, today
announced the release of a new and improved Objet Rigid Black Material. The new material
provides enhanced dimensional stability and surface smoothness making it ideal for fine
detail, all-purpose rapid prototyping.
(Photo:
http://photos.prnewswire.com/prnh/20121121/577843-a )
(Photo:
http://photos.prnewswire.com/prnh/20121121/577843-b )
Based on the new and improved Rigid Black Material, Objet also introduces 16 new Rigid
Black and Rubber-like Digital Materials (composite materials made by combining Objet Rigid
Black and Objet Rubber-like Material).
For Objet Connex systems exclusively, these 16 new Objet Digital Materials enable the
simulation of a variety of rigid/rubber-like properties including:
- A higher toughness material, simulating polypropylene.
- A range of flexible materials with different Shore A values from 27 to 95.
The new material combinations enable the easy and accurate prototyping of seals and
packaging for consumer goods, consumer electronics and automotive parts. Such models
require the combination of rigid and flexible properties within a single prototype of
consistent black coloring (see headphones example in image).
Objet's new Rigid Black material and new Objet Digital Materials are available
immediately*. Objet VeroBlackPlus replaces Objet VeroBlack.
Resources
- Download the Objet Material Data Sheet
[http://objet.com/sites/default/files/pdfs/Objet_Materials_Data_Sheets.pdf ] (PDF)
- Download the Objet Digital Materials Data Sheet
[http://objet.com/sites/default/files/pdfs/Digital_Materials_Data_sheet.pdf ] (PDF)
* DISCLAIMER: Objet Ltd. ("Objet") does not guarantee the final release and
availability of materials, products and/or features referred to herein. Materials will be
released subject to Objet's sole discretion. Not all released materials are currently
available for all platforms/systems. Objet will update its website further as releases
become available and/or compatible with specific platforms/systems.
About Objet
Objet Ltd. [http://www.objet.com ] is a leading provider of high quality, cost
effective inkjet-based 3D printing systems and materials. A global company, Objet has
offices in North America, Europe, Japan, China, Hong Kong, and India.
Objet's 3D printing systems and 3D printing materials are ideal for any company
involved in the manufacture or design of physical products using 3D software or other 3D
content. Companies using Objet's solutions can be typically found in sectors
[http://www.objet.com/INDUSTRIES ] such as consumer goods & electronics, aerospace &
defense, automotive, education, dental, medical and medical devices, architecture,
industrial machinery, footwear, sporting goods, toys and service bureaus.
Founded in 1998, the company has thousands of customers
[http://www.objet.com/RESOURCES/Case_Studies ] worldwide including a substantial share of
the relevant Fortune 100 and Fortune 500. Its award-winning technology (13 awards in 8
years) is based upon over 110 patents and patent pending inventions.
Objet's advanced 3D printing systems and range of over 120 materials
[http://www.objet.com/3D-Printing-Materials ] enable professionals to build prototypes that
accurately simulate the true look, feel and function of an end-product, even complex,
assembled goods. The Objet Connex [http://www.objet.com/3D-Printer/Objet_Connex_Family
](TM) line of multi-material 3D printers features the world's only technology to
simultaneously jet 2 materials. With this, users can print many different materials into a
single part and print various mixed parts on the same build tray. Users can also create
advanced composite materials, or Digital Materials
[http://www.objet.com/3D-Printing-Materials/Overview/Digital_Materials ](TM) featuring
unique mechanical and thermal properties. Objet's range of over 120 3D printing materials
[http://www.objet.com/3D-Printing-Materials ] simulate properties ranging from rigid
[http://www.objet.com/3D-Printing-Materials/Overview/Rigid_Opaque ] to rubber-like
[http://www.objet.com/3D-Printing-Materials/Overview/Rubber-like ], transparent
[http://www.objet.com/3D-Printing-Materials/Overview/Transparent ] to opaque and standard
to ABS-grade engineering plastics
[http://www.objet.com/3D-Printing-Materials/Overview/ABS-like ], with a large number of
in-between shore grades and shades.
Objet's 3D printers [http://www.objet.com/3D-Printer/Products_Overview ] are available
in a range of form-factors, from cost-effective desktop 3D printers ideal for entry-level
professionals all the way to industrial-scale multi-material machines for front-line
designers and top manufacturers. Objet's 3D printers feature the industry's
highest-resolution 3D printing quality, based on 16-micron (0.0006 in.) super-thin
layering, wide material versatility, office friendliness and ease of operation.
For more information, visit us at http://www.objet.com, and for more about 3D
printing industry-related news, business issues and trends, read the Objet blog
[http://blog.objet.com ].
(c) 2012 Objet, Objet24, Objet30, Objet Studio, Quadra, QuadraTempo, FullCure, SHR,
Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager,
CADMatrix, Connex, Connex260, Connex350, Connex500, Alaris, Alaris30, PolyLog, TangoBlack,
TangoGray, TangoPlus, TangoBlackPlus, VeroBlue, VeroBlack, VeroClear, VeroDent, VeroGray,
VeroWhite, VeroWhitePlus, Durus, Digital Materials, PolyJet, PolyJet Matrix, ABS-like and
ObjetGreen are trademarks or registered trademarks of Objet Ltd. and may be registered in
certain jurisdictions. All other trademarks belong to their respective owners.
Objet Media Contacts
USA
Todd Graff
Conover Tuttle Pace
Tel. +1-617-412-4000
Email. tgraff@ctpboston.com
Korea
Jihyun Lee
The Hoffman Agency Korea
Tel. +82-10-3408-1609
Email. jhlee@hoffman.com
Brazil
Tatiana Fonseca
307 Nova Cidade, Sao Paulo
Tel: +55-11-3846-9981
Email: tatiana@gadcom.com.br
Europe
Claire Russell-Jones
UK Bespoke
Tel: +44-1737-215200
E-mail. claire@bespoke.co.uk
Japan
Objet Japan
Aya Yoshizawa
Tel. +81-90-6473-1812
Aya.yoshizawa@objet.com
Mexico
Patricia Tawil
IDESA
Tel. +52-55-5253-9670
Email. ptawil@idesap.com
Objet
Arita Mattsoff
Objet
Tel. +972-(0)74-745-4000
Email. arita@objet.com
Asia Pacific
Objet AP Ltd
Vicki Kei
Tel. +852-3844-8813
Vicki.kei@objet.com
South Africa
Alison McDonald
PR Connections
Tel. +27-(0)11-468-1192
Email. alison@pr.co.za
Photo:
http://photos.prnewswire.com/prnh/20121121/577843-a
http://photos.prnewswire.com/prnh/20121121/577843-b
Photo:http://photos.prnewswire.com/prnh/20121121/577843-a
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20121121/577843-b
http://photoarchive.ap.org/
Objet Ltd.
REHOVOT, Israel, November 21, 2012 /PRNewswire/ --
- New Rigid Black material enables printing of 3D models with enhanced
dimensional stability and surface smoothness.
- New Objet Digital Material composites can simulate polypropylene and range of
flexibilities from Shore 27 - 95.
Objet Ltd [http://www.objet.com ]., the innovation leader in 3D printing
[http://www.youtube.com/watch?v=mX6G-TluQHE&feature=plcp ] for rapid prototyping
[http://objet.com/knowledge-center/rapid-prototyping ] and additive manufacturing, today
announced the release of a new and improved Objet Rigid Black Material. The new material
provides enhanced dimensional stability and surface smoothness making it ideal for fine
detail, all-purpose rapid prototyping.
(Photo:
http://photos.prnewswire.com/prnh/20121121/577843-a )
(Photo:
http://photos.prnewswire.com/prnh/20121121/577843-b )
Based on the new and improved Rigid Black Material, Objet also introduces 16 new Rigid
Black and Rubber-like Digital Materials (composite materials made by combining Objet Rigid
Black and Objet Rubber-like Material).
For Objet Connex systems exclusively, these 16 new Objet Digital Materials enable the
simulation of a variety of rigid/rubber-like properties including:
- A higher toughness material, simulating polypropylene.
- A range of flexible materials with different Shore A values from 27 to 95.
The new material combinations enable the easy and accurate prototyping of seals and
packaging for consumer goods, consumer electronics and automotive parts. Such models
require the combination of rigid and flexible properties within a single prototype of
consistent black coloring (see headphones example in image).
Objet's new Rigid Black material and new Objet Digital Materials are available
immediately*. Objet VeroBlackPlus replaces Objet VeroBlack.
Resources
- Download the Objet Material Data Sheet
[http://objet.com/sites/default/files/pdfs/Objet_Materials_Data_Sheets.pdf ] (PDF)
- Download the Objet Digital Materials Data Sheet
[http://objet.com/sites/default/files/pdfs/Digital_Materials_Data_sheet.pdf ] (PDF)
* DISCLAIMER: Objet Ltd. ("Objet") does not guarantee the final release and
availability of materials, products and/or features referred to herein. Materials will be
released subject to Objet's sole discretion. Not all released materials are currently
available for all platforms/systems. Objet will update its website further as releases
become available and/or compatible with specific platforms/systems.
About Objet
Objet Ltd. [http://www.objet.com ] is a leading provider of high quality, cost
effective inkjet-based 3D printing systems and materials. A global company, Objet has
offices in North America, Europe, Japan, China, Hong Kong, and India.
Objet's 3D printing systems and 3D printing materials are ideal for any company
involved in the manufacture or design of physical products using 3D software or other 3D
content. Companies using Objet's solutions can be typically found in sectors
[http://www.objet.com/INDUSTRIES ] such as consumer goods & electronics, aerospace &
defense, automotive, education, dental, medical and medical devices, architecture,
industrial machinery, footwear, sporting goods, toys and service bureaus.
Founded in 1998, the company has thousands of customers
[http://www.objet.com/RESOURCES/Case_Studies ] worldwide including a substantial share of
the relevant Fortune 100 and Fortune 500. Its award-winning technology (13 awards in 8
years) is based upon over 110 patents and patent pending inventions.
Objet's advanced 3D printing systems and range of over 120 materials
[http://www.objet.com/3D-Printing-Materials ] enable professionals to build prototypes that
accurately simulate the true look, feel and function of an end-product, even complex,
assembled goods. The Objet Connex [http://www.objet.com/3D-Printer/Objet_Connex_Family
](TM) line of multi-material 3D printers features the world's only technology to
simultaneously jet 2 materials. With this, users can print many different materials into a
single part and print various mixed parts on the same build tray. Users can also create
advanced composite materials, or Digital Materials
[http://www.objet.com/3D-Printing-Materials/Overview/Digital_Materials ](TM) featuring
unique mechanical and thermal properties. Objet's range of over 120 3D printing materials
[http://www.objet.com/3D-Printing-Materials ] simulate properties ranging from rigid
[http://www.objet.com/3D-Printing-Materials/Overview/Rigid_Opaque ] to rubber-like
[http://www.objet.com/3D-Printing-Materials/Overview/Rubber-like ], transparent
[http://www.objet.com/3D-Printing-Materials/Overview/Transparent ] to opaque and standard
to ABS-grade engineering plastics
[http://www.objet.com/3D-Printing-Materials/Overview/ABS-like ], with a large number of
in-between shore grades and shades.
Objet's 3D printers [http://www.objet.com/3D-Printer/Products_Overview ] are available
in a range of form-factors, from cost-effective desktop 3D printers ideal for entry-level
professionals all the way to industrial-scale multi-material machines for front-line
designers and top manufacturers. Objet's 3D printers feature the industry's
highest-resolution 3D printing quality, based on 16-micron (0.0006 in.) super-thin
layering, wide material versatility, office friendliness and ease of operation.
For more information, visit us at http://www.objet.com, and for more about 3D
printing industry-related news, business issues and trends, read the Objet blog
[http://blog.objet.com ].
(c) 2012 Objet, Objet24, Objet30, Objet Studio, Quadra, QuadraTempo, FullCure, SHR,
Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager,
CADMatrix, Connex, Connex260, Connex350, Connex500, Alaris, Alaris30, PolyLog, TangoBlack,
TangoGray, TangoPlus, TangoBlackPlus, VeroBlue, VeroBlack, VeroClear, VeroDent, VeroGray,
VeroWhite, VeroWhitePlus, Durus, Digital Materials, PolyJet, PolyJet Matrix, ABS-like and
ObjetGreen are trademarks or registered trademarks of Objet Ltd. and may be registered in
certain jurisdictions. All other trademarks belong to their respective owners.
Objet Media Contacts
USA
Todd Graff
Conover Tuttle Pace
Tel. +1-617-412-4000
Email. tgraff@ctpboston.com
Korea
Jihyun Lee
The Hoffman Agency Korea
Tel. +82-10-3408-1609
Email. jhlee@hoffman.com
Brazil
Tatiana Fonseca
307 Nova Cidade, Sao Paulo
Tel: +55-11-3846-9981
Email: tatiana@gadcom.com.br
Europe
Claire Russell-Jones
UK Bespoke
Tel: +44-1737-215200
E-mail. claire@bespoke.co.uk
Japan
Objet Japan
Aya Yoshizawa
Tel. +81-90-6473-1812
Aya.yoshizawa@objet.com
Mexico
Patricia Tawil
IDESA
Tel. +52-55-5253-9670
Email. ptawil@idesap.com
Objet
Arita Mattsoff
Objet
Tel. +972-(0)74-745-4000
Email. arita@objet.com
Asia Pacific
Objet AP Ltd
Vicki Kei
Tel. +852-3844-8813
Vicki.kei@objet.com
South Africa
Alison McDonald
PR Connections
Tel. +27-(0)11-468-1192
Email. alison@pr.co.za
Photo:
http://photos.prnewswire.com/prnh/20121121/577843-a
http://photos.prnewswire.com/prnh/20121121/577843-b
Photo:http://photos.prnewswire.com/prnh/20121121/577843-a
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20121121/577843-b
http://photoarchive.ap.org/
Objet Ltd.