Teledyne LeCroy Rolls Out Power Analyzer Software Option for HDO4000 and HDO6000 High Definition Oscilloscopes
Poster: SySAdmin
Posted on October 29, 2012 at 8:56:01 AM
Teledyne LeCroy Rolls Out Power Analyzer Software Option for HDO4000 and HDO6000 High Definition Oscilloscopes
Quickly Measure and Analyze Power Conversion Devices and Circuits
CHESTNUT RIDGE, N.Y., Oct. 29, 2012 /PRNewswire/ -- Teledyne LeCroy today introduces its Power Analyzer software option for the HDO4000 and HDO6000 High Definition Oscilloscopes, which enables easy measurement and powerful analysis of the operating characteristics of power conversion devices and circuits. With the software, the HDO oscilloscopes analyze all aspects of switched-mode power devices with tools for automatic power loss measurements, control loop modulation analysis, and line power harmonics testing, all within a streamlined user interface that simplifies probe and measurement setup.
Broad Analysis Capabilities
For analysis of power losses in switching devices or circuits, the Power Analyzer software automatically detects and measures turn-on, turn-off, conduction, and off state losses. A unique color-coded overlay annotates the power waveform and identifies all areas of power losses. The Safe Operating Area (SOA) plot shows in-circuit behavior of the power device under test to quickly identify any transitions near the peak power limits. The dedicated interface handles proper probe setup to eliminate sources of error associated with probing.
Control loop analysis evaluates the loop dynamics of switched-mode power devices, plotting the variation of pulse width, duty cycle, period, or frequency. This analysis mode takes advantage of the HDOs' long memory of up to 250 Mpts to capture control loop performance during startup.
Pre-compliance testing of line power harmonics is performed to the EN61000-3-2 standard. Voltage, current, and line harmonics may be viewed simultaneously. Mask testing reports when harmonics are outside the allowable range and all results are summarized in a table.
Pricing
Power Analyzer software for the HDO4000 and HDO6000 High Definition Oscilloscopes is priced at $1,700. For further information, engineers and technicians can contact Teledyne LeCroy at 1-800-5LeCroy (1-800-553-2769) or visit teledynelecroy.com.
About Teledyne LeCroy
Teledyne LeCroy Corporation is a worldwide leader in serial data test solutions, creating advanced instruments that drive product innovation by quickly measuring, analyzing, and verifying complex electronic signals. The Company offers high-performance oscilloscopes, protocol analyzers, and global communications protocol test solutions used by design engineers in the computer, semiconductor and consumer electronics, data storage, automotive and industrial, military and aerospace, and telecommunication markets. Teledyne LeCroy's 48-year heritage of technical innovation is the foundation for its recognized leadership in "WaveShape Analysis"--capturing, viewing, and measuring the high-speed signals that drive today's information and communications technologies. Teledyne LeCroy is headquartered in Chestnut Ridge, New York. Company information is available at teledynelecroy.com.
© 2012 by Teledyne LeCroy Corporation. All rights reserved. Specifications are subject to change without notice.
Website: teledynelecroy.com
SOURCE Teledyne LeCroy Corporation
Teledyne LeCroy Corporation
CONTACT: Media, Patrick Brightman of SGW, +1-973-263-5475, Editors' Technical contact, Steve Murphy, +1-845-425-2000, or Customer contact, Teledyne LeCroy Customer Care Center,1-800-553-2769
Web Site: http://teledynelecroy.com
Quickly Measure and Analyze Power Conversion Devices and Circuits
CHESTNUT RIDGE, N.Y., Oct. 29, 2012 /PRNewswire/ -- Teledyne LeCroy today introduces its Power Analyzer software option for the HDO4000 and HDO6000 High Definition Oscilloscopes, which enables easy measurement and powerful analysis of the operating characteristics of power conversion devices and circuits. With the software, the HDO oscilloscopes analyze all aspects of switched-mode power devices with tools for automatic power loss measurements, control loop modulation analysis, and line power harmonics testing, all within a streamlined user interface that simplifies probe and measurement setup.
Broad Analysis Capabilities
For analysis of power losses in switching devices or circuits, the Power Analyzer software automatically detects and measures turn-on, turn-off, conduction, and off state losses. A unique color-coded overlay annotates the power waveform and identifies all areas of power losses. The Safe Operating Area (SOA) plot shows in-circuit behavior of the power device under test to quickly identify any transitions near the peak power limits. The dedicated interface handles proper probe setup to eliminate sources of error associated with probing.
Control loop analysis evaluates the loop dynamics of switched-mode power devices, plotting the variation of pulse width, duty cycle, period, or frequency. This analysis mode takes advantage of the HDOs' long memory of up to 250 Mpts to capture control loop performance during startup.
Pre-compliance testing of line power harmonics is performed to the EN61000-3-2 standard. Voltage, current, and line harmonics may be viewed simultaneously. Mask testing reports when harmonics are outside the allowable range and all results are summarized in a table.
Pricing
Power Analyzer software for the HDO4000 and HDO6000 High Definition Oscilloscopes is priced at $1,700. For further information, engineers and technicians can contact Teledyne LeCroy at 1-800-5LeCroy (1-800-553-2769) or visit teledynelecroy.com.
About Teledyne LeCroy
Teledyne LeCroy Corporation is a worldwide leader in serial data test solutions, creating advanced instruments that drive product innovation by quickly measuring, analyzing, and verifying complex electronic signals. The Company offers high-performance oscilloscopes, protocol analyzers, and global communications protocol test solutions used by design engineers in the computer, semiconductor and consumer electronics, data storage, automotive and industrial, military and aerospace, and telecommunication markets. Teledyne LeCroy's 48-year heritage of technical innovation is the foundation for its recognized leadership in "WaveShape Analysis"--capturing, viewing, and measuring the high-speed signals that drive today's information and communications technologies. Teledyne LeCroy is headquartered in Chestnut Ridge, New York. Company information is available at teledynelecroy.com.
© 2012 by Teledyne LeCroy Corporation. All rights reserved. Specifications are subject to change without notice.
Website: teledynelecroy.com
SOURCE Teledyne LeCroy Corporation
Teledyne LeCroy Corporation
CONTACT: Media, Patrick Brightman of SGW, +1-973-263-5475, Editors' Technical contact, Steve Murphy, +1-845-425-2000, or Customer contact, Teledyne LeCroy Customer Care Center,1-800-553-2769
Web Site: http://teledynelecroy.com