Wed Hardware Reviews

Author
Aron Schatz
Posted
October 20, 2004
Views
1586
Tags Reviews

Page All:

Page 1
Yes, it is slow this week. We are preparing for a server move!!!

Crucial Ballistix PC3200 @ VL.

Quote

As for the performance results we see that for the most part, the two sticks of RAM performed very close to each other even with the differences in timings. The latency of the Crucial memory at its tightest timings was a good bit lower than the Corsair memory, and provided better synthetic numbers. The real world differences between timings was less than 3% in basically all cases.


Abit AA8 @ ClubOC.

Quote

Recently we've had a taste of Intel's 915 chipset at it's finest, the ABIT AG8. Now it's time to check out the 925 chipset based board, the ABIT AA8 DuraMAX. With this board we still have PCI Express and LGA 775, but this time we graduate to DDR2. We already shown you what this board can do with our recent 3GHz CPU review, but now it's time to get serious and dig into this board a little deeper.


Budget Memory Roundup @ 3DX.

Quote

Today 3DXtreme takes at a look some budget memory covering a wide spectrum from PC3200 to PC3700 and varying from CAS 2 to CAS 3. We have Wintec Amp-X Gaming modules, SuperTalent 512MB CAS2 modules and some Geil Value PC3200. This gives us an opportunity to evaluate lesser known brand names to see how they compare to a more well known brand. Like a lot of electronics today it doesn’t take much to create a product, all that needs to be done is base it on a well established IC chip like Samsung or Infineon and the result is a product that performs nearly as well as the top of the line memory for considerably less. Let’s have a look at our memory offerings today and see how well they performed.


OCZ PC4000 @ OCModshop.

Quote

In this review, OCModShop is testing OCZ’s Gold Edition PC4000EL DDR Dual channel kit. This 1GB of total memory consists of two 512MB modules and is specifically paired to use a dual channel motherboard. The OCZ PC4000EL DDR is rated to run at 250MHz while maintaing fast timings of 2.5-4-4-7 at 2.8V. Unofficially, this memory can easily run at 265MHz. The DIMMs are absolutely beautiful and have a quality look. The copper heat spreaders are gold plated and buffed to a mirror finish with a light golden color. Not only does this help protect the module from physical damage, but it looks really shiny, and we all like shiny things! The spreaders also add to the product’s weight, weighing in at 74 grams (a normal DIMM weighs an average of 40g).


New AMD Chips. FX55 and 4000+
http://www.pcstats.com/articleview.cfm?articleID=1666
http://www.amdzone.com/modules.php?op=modload&name=Sections&file=index&req=viewarticle&artid=70&page=1
http://www.short-media.com/review.php?r=266
http://www.vr-zone.com/?i=1357&s=1
http://www.hexus.net/content/reviews/review.php?dXJsX3Jldmlld19JRD04ODg=
http://www.amdreview.com/reviews.php?rev=fx-55-4000
http://www.techwarelabs.com/reviews/processors/amd4000_fx55/
http://www.lostcircuits.com/cpu/amd_a64-4000/

OCZ PC2-5400 @ ClubOC.

Quote

DDR2 is finally here. I've been excited about this memory ever since it was first announced. It's great to get excited about new hardware. The only thing that's bad about new hardware is the fact that you know you're going to have to upgrade to it. In this case it's a little worse. There are currently no AMD platforms that except DDR2 and the only Intel DDR2 platform requires a LGA775 CPU and a PCI-E video card. Your upgrade to DDR2 is going to require a major commitment. However, this is the future of memory and you know you want the newest and fastest components.


nForce 4:
http://www.amdzone.com/modules.php?op=modload&name=Sections&file=index&req=viewarticle&artid=71&page=1
http://www.hardwareanalysis.com/content/article/1746/
http://www.bjorn3d.com/read.php?cID=712
[AURL=http://www.hexus.net/content/reviews/review.php?dXJsX3Jldmlld19JRD04ODk=]http://www.hexus.net/content/reviews/re ... 9JRD04ODk=[/AURL:1098308

Title

Medium Image View Large