ZMDI, a Global Semiconductor Company, Announces the Release of the ZSPM4521, ZSPM4522, ZSPM4523 and ZSPM4551, a Family of Smart Chargers for Li-ion or NiMH Batteries or Super Caps, Utilizing Photovolt
Poster: SySAdmin
Posted on August 27, 2012 at 6:07:01 AM
ZMDI, a Global Semiconductor Company, Announces the Release of the ZSPM4521, ZSPM4522, ZSPM4523 and ZSPM4551, a Family of Smart Chargers for Li-ion or NiMH Batteries or Super Caps, Utilizing Photovoltaic or Conventional Sources
DRESDEN, Germany, August 27, 2012/PRNewswire/ --
ZMD AG (ZMDI), a Dresden-based semiconductor company that specializes in enabling
energy-efficient solutions, today announces the release of the ZSPM4521, ZSPM4522,
ZSPM4523 and ZSPM4551. The ZSPM4521, ZSPM4522 and ZSPM4523 provide a
temperature-independent photovoltaic maximum power point tracking (MPPT) regulator to
optimize power output from solar sources while the ZSPM4551 is optimized for conventional
power sources. Its switching frequency of 1MHz enables the use of small filter components,
resulting in smaller board space and reduced system costs.
The integrated I2C[TM] (trademark of NXP) interface enables the user to set
application-specific temperature-compensated termination voltages with a plus or minus 1%
tolerance and control charging currents.
All four ICs can regulate up to 1.5A continuous drive current.
The ZSPM4521 and ZSPM4551 are DC/DC synchronous switching lithium-ion (Li-ion) battery
chargers with integrated power switches, internal compensation and fault protection. Both
devices contain Li-ion-specific protection for over-current, over-temperature, battery
(VBAT) over-voltage and charging timeout. In addition, they include supervisory reporting
through the NFLT (inverted fault) open-drain output to interface with other components in
the system.
The ZSPM4522 is a DC/DC synchronous switching nickel-metal hydride (NiMH) battery
charger with integrated power switches, internal compensation and fault protection
specific to NiMH batteries. It features input supply under-voltage lockout and full
protection for VBAT over-voltage.
The ZSPM4523 is a DC/DC synchronous switching super capacitor charger with integrated
power switches, internal compensation and full fault protection. It integrates a wide
range of protection circuitry, including input supply under-voltage lockout, output
over-voltage protection, current limiting and thermal shutdown.
The ZSPM452x and ZSPM4551 are in a league of their own when it comes to their high
level of integration, up to 92% efficiency with typical loads and ultra-low power
consumption. When the regulator is disabled, the devices draw less than 10microA quiescent
current.
"ZMDI [http://www.zmdi.com ] is committed to developing advanced solutions to meet our
customers' variety of needs. The ZSPM4521, ZSPM4522, ZSPM4523 and the ZSPM4551, a family
of smart chargers, support our customers' direction into portable applications, and these
products are another example of ZMDI's commitment to providing the very best solutions for
our energy-conscious customers," stated Edward Lam, Vice President of Product Marketing
and Business Development at ZMDI.
Smart Charger Family Features:
- 1.5A continuous output current
- VBAT reverse-current blocking (VCAP for the ZSPM4523)
- Programmable temperature-compensated termination voltage
- User-programmable charging current
- VBAT over-voltage and charging-timeout supervisor for VBAT reported at the
NFLT pin for Li-ion battery chargers
- Input supply under-voltage lockout
- Full protection for over-current and over-temperature
- Charge status indication
- I2C(TM) program interface with EEPROM registers
- Temperature (junction) range -40C to 125C
- Package: 16-L PQFN
Availability & Pricing
ZSPM4521 USD1.85/Euro 1.37 @ 1Ku, ZSPM4522 USD1.60/Euro 1.18 @ 1Ku,
ZSPM4523 USD1.58/Euro 1.17 @ 1Ku, ZSPM4551 USD1.65/Euro 1.22 @ 1Ku.
About ZMDI
Zentrum Mikroelektronik Dresden AG (ZMDI [http://www.zmdi.com ]) is a global supplier of
analog and mixed-signal semiconductors solutions for automotive, industrial, medical,
information technology and consumer applications. These solutions enable our customers to
create the most energy-efficient products in power management, lighting and sensors.
For over 50 years ZMDI has been globally headquartered in Dresden, Germany. With over
320 employees worldwide ZMDI serves its customers with sales offices and design centers
throughout Germany, Italy, Bulgaria, France, United Kingdom, Ireland, Japan, Korea, Taiwan
and the United States.
http://www.zmdi.com.
The URL for this news release ishttp://www.zmdi.com/news/press-releases-news/
[http://www.zmdi.com/news/press-releases-news ]
For further information:
Daniel Aitken, ZMDI Global Director of Corporate Marketing and Communications, T
+1-514-831-6722, daniel.aitken@zmdi.com
Source: ZMDI
DRESDEN, Germany, August 27, 2012/PRNewswire/ --
ZMD AG (ZMDI), a Dresden-based semiconductor company that specializes in enabling
energy-efficient solutions, today announces the release of the ZSPM4521, ZSPM4522,
ZSPM4523 and ZSPM4551. The ZSPM4521, ZSPM4522 and ZSPM4523 provide a
temperature-independent photovoltaic maximum power point tracking (MPPT) regulator to
optimize power output from solar sources while the ZSPM4551 is optimized for conventional
power sources. Its switching frequency of 1MHz enables the use of small filter components,
resulting in smaller board space and reduced system costs.
The integrated I2C[TM] (trademark of NXP) interface enables the user to set
application-specific temperature-compensated termination voltages with a plus or minus 1%
tolerance and control charging currents.
All four ICs can regulate up to 1.5A continuous drive current.
The ZSPM4521 and ZSPM4551 are DC/DC synchronous switching lithium-ion (Li-ion) battery
chargers with integrated power switches, internal compensation and fault protection. Both
devices contain Li-ion-specific protection for over-current, over-temperature, battery
(VBAT) over-voltage and charging timeout. In addition, they include supervisory reporting
through the NFLT (inverted fault) open-drain output to interface with other components in
the system.
The ZSPM4522 is a DC/DC synchronous switching nickel-metal hydride (NiMH) battery
charger with integrated power switches, internal compensation and fault protection
specific to NiMH batteries. It features input supply under-voltage lockout and full
protection for VBAT over-voltage.
The ZSPM4523 is a DC/DC synchronous switching super capacitor charger with integrated
power switches, internal compensation and full fault protection. It integrates a wide
range of protection circuitry, including input supply under-voltage lockout, output
over-voltage protection, current limiting and thermal shutdown.
The ZSPM452x and ZSPM4551 are in a league of their own when it comes to their high
level of integration, up to 92% efficiency with typical loads and ultra-low power
consumption. When the regulator is disabled, the devices draw less than 10microA quiescent
current.
"ZMDI [http://www.zmdi.com ] is committed to developing advanced solutions to meet our
customers' variety of needs. The ZSPM4521, ZSPM4522, ZSPM4523 and the ZSPM4551, a family
of smart chargers, support our customers' direction into portable applications, and these
products are another example of ZMDI's commitment to providing the very best solutions for
our energy-conscious customers," stated Edward Lam, Vice President of Product Marketing
and Business Development at ZMDI.
Smart Charger Family Features:
- 1.5A continuous output current
- VBAT reverse-current blocking (VCAP for the ZSPM4523)
- Programmable temperature-compensated termination voltage
- User-programmable charging current
- VBAT over-voltage and charging-timeout supervisor for VBAT reported at the
NFLT pin for Li-ion battery chargers
- Input supply under-voltage lockout
- Full protection for over-current and over-temperature
- Charge status indication
- I2C(TM) program interface with EEPROM registers
- Temperature (junction) range -40C to 125C
- Package: 16-L PQFN
Availability & Pricing
ZSPM4521 USD1.85/Euro 1.37 @ 1Ku, ZSPM4522 USD1.60/Euro 1.18 @ 1Ku,
ZSPM4523 USD1.58/Euro 1.17 @ 1Ku, ZSPM4551 USD1.65/Euro 1.22 @ 1Ku.
About ZMDI
Zentrum Mikroelektronik Dresden AG (ZMDI [http://www.zmdi.com ]) is a global supplier of
analog and mixed-signal semiconductors solutions for automotive, industrial, medical,
information technology and consumer applications. These solutions enable our customers to
create the most energy-efficient products in power management, lighting and sensors.
For over 50 years ZMDI has been globally headquartered in Dresden, Germany. With over
320 employees worldwide ZMDI serves its customers with sales offices and design centers
throughout Germany, Italy, Bulgaria, France, United Kingdom, Ireland, Japan, Korea, Taiwan
and the United States.
http://www.zmdi.com.
The URL for this news release ishttp://www.zmdi.com/news/press-releases-news/
[http://www.zmdi.com/news/press-releases-news ]
For further information:
Daniel Aitken, ZMDI Global Director of Corporate Marketing and Communications, T
+1-514-831-6722, daniel.aitken@zmdi.com
Source: ZMDI