New Broadcom 10GBASE-T PHYs Deliver 50 Percent Lower Power
Poster: SySAdmin
Posted on April 16, 2012 at 7:21:01 AM
New Broadcom 10GBASE-T PHYs Deliver 50 Percent Lower Power
Less Than Two Watts Per Port with Energy Efficient Ethernet Enable Substantial Power Savings in the Data Center
IRVINE, Calif., April 16, 2012 /PRNewswire/ --
News Highlights:
-- Optimized for data center top of rack (ToR) switches and 10GbE server
adapters
-- Extends Energy Efficient Ethernet (EEE) support to all three operating
speeds: 1GbE, 10GbE and 100M
-- Highly integrated with on-chip MACsec security and 1588 precision timing
protocol
Broadcom Corporation (NASDAQ: BRCM), a global innovation leader in semiconductor solutions for wired and wireless communications, today announced the addition of two 10GBASE-T physical layer transceivers (PHYs) to its growing portfolio of 10GBASE-T networking solutions. Optimized for top-of-rack switches, 10GbE server adapters and LOMs (LAN on motherboard) in the data center, the highly integrated quad-port BCM84844 and dual-port BCM84846 lower operating power by more than 50 percent(1). The new PHYs substantially reduce power consumption at 10GE to less than two watts per port through the use of EEE, and extend the benefits of EEE to include all device speeds including 1GbE. For more news, visit Broadcom's newsroom.
As a result of increasing network traffic and higher bandwidth servers( )such as Romley, industry analysts predict a 20x increase in 10GBASE-T adoption by 2013, as data centers upgrade to higher densities(2). Broadcom's second generation 40 nanometer (nm) PHYs drive innovation in 10GbE, offering robust operation over 100 meter cables while significantly reducing footprint, cost and power consumption.
Power is critical as network managers seek to reduce cost and carbon footprint of large scale data centers. Broadcom's AutoGrEEEn(TM) technology enables systems with legacy MACs to get the power savings of EEE in periods of reduced link utilization. Both PHYs provide on-chip IEEE802.1ae MACsec link layer security and 1588v2 precision time protocol (PTP), delivering precise and accurate synchronization of nodes in the network.
Broadcom's new BCM84844 and BCM84846 deliver lower power while offering pin compatibility to previous Broadcom devices (BCM84834 and BCM84836) and integration with Broadcom's broad portfolio of switch, controller, and adapter solutions. This includes PHY drivers within Broadcom's Software Development Kit (SDK) and common implementations of MACsec and 1588v2 PTP.
Market Drivers:
-- Global IP traffic expected to grow twenty-fold by 2016(3)
-- 10GBASE-T adoption to increase 20x by 2013(2)
-- 10GbE port shipments expected to reach 62.2M in 2016 from 8.5 M in
2011(4)
-- Massive traffic growth challenges current network architecture(5)
Key Features:
-- Supports IEEE Std 802.3az(TM)-2010 Energy Efficient Ethernet (EEE)
capability for 10GBASE-T,1000BASE-T and 100BASE-TX
-- Robust operation over 100m Category 6A cables with industry-standard
4-pair magnetics
-- IEEE standard device interoperability: 10 Gbps, 100 Mbps and 1000 Mbps
-- Broadcom® AutoGrEEEn technology extends EEE power savings to legacy
MACs at both 1 and 10 Gbps data rates
-- Line-side XFI enables dual-media applications
-- Reduced footprint with 27x27mm (BCM84844) and 21x21mm package (BCM84846)
Availability
The BCM84844 and BCM84846 are now sampling with production volume slated for 2H12.
For ongoing news, visit Broadcom's Newsroom, read the B-Connected Blog, or visit Facebook or Twitter. And to stay connected, subscribe to Broadcom's RSS Feed.
Quote:
Kevin Brown, Broadcom's Vice President and General Manager, PHY
"Demand for high-density switches and servers with 10GBASE-T connectivity is growing and our latest PHYs extend the industry-leading features our customers have come to expect from Broadcom. We continue to push the envelope in delivering the industry's most advanced products while driving down cost, footprint and power consumption. Lowering device power to less than two watts per port is an important step forward in the adoption of 10GBASE-T."
About Broadcom
Broadcom Corporation (NASDAQ: BRCM), a FORTUNE 500® company, is a global leader and innovator in semiconductor solutions for wired and wireless communications. Broadcom® products seamlessly deliver voice, video, data and multimedia connectivity in the home, office and mobile environments. With the industry's broadest portfolio of state-of-the-art system-on-a-chip and embedded software solutions, Broadcom is changing the world by Connecting everything®. For more information, go to http://www.broadcom.com.
Broadcom®, the pulse logo, Connecting everything®, the Connecting everything logo and AutoGrEEEn® are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners.
Resources:
(1) 50 percent reduction as compared to previous generation Broadcom 65nm PHYs
(2) Crehan Research, Data Center Switching and Server-Class Adapter & LOM - January 2012
(3) Cisco Virtual Networking Index, 2011 - 2016
(4) Dell'Oro Ethernet Forecast January, 2012
(5) Linley Group Guide to Ethernet Switch and PHY Chips December, 2011
Contacts
--------
Press Investors
Tamara Snowden Chris Zegarelli
Broadcom Public Relations Director, Investor Relations
408-922-6505 949-926-7567
tamaras@broadcom.com czegarel@broadcom.com
SOURCE Broadcom Corporation; BRCM Infrastructure & Networking
Photo:http://photos.prnewswire.com/prnh/20060609/BROADCOMLOGO
http://photoarchive.ap.org/
Broadcom Corporation; BRCM Infrastructure & Networking
Web Site: http://www.broadcom.com
Less Than Two Watts Per Port with Energy Efficient Ethernet Enable Substantial Power Savings in the Data Center
IRVINE, Calif., April 16, 2012 /PRNewswire/ --
News Highlights:
-- Optimized for data center top of rack (ToR) switches and 10GbE server
adapters
-- Extends Energy Efficient Ethernet (EEE) support to all three operating
speeds: 1GbE, 10GbE and 100M
-- Highly integrated with on-chip MACsec security and 1588 precision timing
protocol
Broadcom Corporation (NASDAQ: BRCM), a global innovation leader in semiconductor solutions for wired and wireless communications, today announced the addition of two 10GBASE-T physical layer transceivers (PHYs) to its growing portfolio of 10GBASE-T networking solutions. Optimized for top-of-rack switches, 10GbE server adapters and LOMs (LAN on motherboard) in the data center, the highly integrated quad-port BCM84844 and dual-port BCM84846 lower operating power by more than 50 percent(1). The new PHYs substantially reduce power consumption at 10GE to less than two watts per port through the use of EEE, and extend the benefits of EEE to include all device speeds including 1GbE. For more news, visit Broadcom's newsroom.
As a result of increasing network traffic and higher bandwidth servers( )such as Romley, industry analysts predict a 20x increase in 10GBASE-T adoption by 2013, as data centers upgrade to higher densities(2). Broadcom's second generation 40 nanometer (nm) PHYs drive innovation in 10GbE, offering robust operation over 100 meter cables while significantly reducing footprint, cost and power consumption.
Power is critical as network managers seek to reduce cost and carbon footprint of large scale data centers. Broadcom's AutoGrEEEn(TM) technology enables systems with legacy MACs to get the power savings of EEE in periods of reduced link utilization. Both PHYs provide on-chip IEEE802.1ae MACsec link layer security and 1588v2 precision time protocol (PTP), delivering precise and accurate synchronization of nodes in the network.
Broadcom's new BCM84844 and BCM84846 deliver lower power while offering pin compatibility to previous Broadcom devices (BCM84834 and BCM84836) and integration with Broadcom's broad portfolio of switch, controller, and adapter solutions. This includes PHY drivers within Broadcom's Software Development Kit (SDK) and common implementations of MACsec and 1588v2 PTP.
Market Drivers:
-- Global IP traffic expected to grow twenty-fold by 2016(3)
-- 10GBASE-T adoption to increase 20x by 2013(2)
-- 10GbE port shipments expected to reach 62.2M in 2016 from 8.5 M in
2011(4)
-- Massive traffic growth challenges current network architecture(5)
Key Features:
-- Supports IEEE Std 802.3az(TM)-2010 Energy Efficient Ethernet (EEE)
capability for 10GBASE-T,1000BASE-T and 100BASE-TX
-- Robust operation over 100m Category 6A cables with industry-standard
4-pair magnetics
-- IEEE standard device interoperability: 10 Gbps, 100 Mbps and 1000 Mbps
-- Broadcom® AutoGrEEEn technology extends EEE power savings to legacy
MACs at both 1 and 10 Gbps data rates
-- Line-side XFI enables dual-media applications
-- Reduced footprint with 27x27mm (BCM84844) and 21x21mm package (BCM84846)
Availability
The BCM84844 and BCM84846 are now sampling with production volume slated for 2H12.
For ongoing news, visit Broadcom's Newsroom, read the B-Connected Blog, or visit Facebook or Twitter. And to stay connected, subscribe to Broadcom's RSS Feed.
Quote:
Kevin Brown, Broadcom's Vice President and General Manager, PHY
"Demand for high-density switches and servers with 10GBASE-T connectivity is growing and our latest PHYs extend the industry-leading features our customers have come to expect from Broadcom. We continue to push the envelope in delivering the industry's most advanced products while driving down cost, footprint and power consumption. Lowering device power to less than two watts per port is an important step forward in the adoption of 10GBASE-T."
About Broadcom
Broadcom Corporation (NASDAQ: BRCM), a FORTUNE 500® company, is a global leader and innovator in semiconductor solutions for wired and wireless communications. Broadcom® products seamlessly deliver voice, video, data and multimedia connectivity in the home, office and mobile environments. With the industry's broadest portfolio of state-of-the-art system-on-a-chip and embedded software solutions, Broadcom is changing the world by Connecting everything®. For more information, go to http://www.broadcom.com.
Broadcom®, the pulse logo, Connecting everything®, the Connecting everything logo and AutoGrEEEn® are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners.
Resources:
(1) 50 percent reduction as compared to previous generation Broadcom 65nm PHYs
(2) Crehan Research, Data Center Switching and Server-Class Adapter & LOM - January 2012
(3) Cisco Virtual Networking Index, 2011 - 2016
(4) Dell'Oro Ethernet Forecast January, 2012
(5) Linley Group Guide to Ethernet Switch and PHY Chips December, 2011
Contacts
--------
Press Investors
Tamara Snowden Chris Zegarelli
Broadcom Public Relations Director, Investor Relations
408-922-6505 949-926-7567
tamaras@broadcom.com czegarel@broadcom.com
SOURCE Broadcom Corporation; BRCM Infrastructure & Networking
Photo:http://photos.prnewswire.com/prnh/20060609/BROADCOMLOGO
http://photoarchive.ap.org/
Broadcom Corporation; BRCM Infrastructure & Networking
Web Site: http://www.broadcom.com