Connect the Construction Site with Trimble to Increase Efficiency and Reduce Cost
Poster: SySAdmin
Posted on April 16, 2012 at 5:42:01 AM
Connect the Construction Site with Trimble to Increase Efficiency and Reduce Cost
Three New Solutions from Trimble Heavy Civil Construction Benefit the Bottom Line
PARIS, April 16, 2012 /PRNewswire/ -- Trimble (NASDAQ:TRMB) today introduced three new solutions for heavy civil construction professionals, the Trimble® Connected Office, the Trimble Connected Controller and the Trimble Connected Machine.
When used together to create the Trimble Connected Site® solution, time and cost can be saved at every stage, virtually eliminating steps in the plan, design, construct and operate process. Trimble's Connected Site can improve the efficiency of construction projects, resulting in the earlier completion of higher quality projects at a lower cost.
"The Trimble Connected Site uses construction technology to improve efficiency and productivity, while minimizing waste and expense," said Roz Buick, vice president and general manager for Trimble's Civil Construction Division. "Trimble solutions empower contractors with site-wide information integration, and transform the way a contractor gets the job done."
The announcement was made at Intermat 2012, the international exhibition of equipment, machinery and techniques for the construction and materials industries.
The Connected Office
The Trimble Connected Office solution uses software and hosted services to create 3D construction models, perform data preparation and takeoff, wirelessly sync data, monitor site productivity, and manage fleets and assets. The 3D design model created in the office can be sent wirelessly to the field, increasing efficiency, reducing rework and saving money. Additionally, a complete view of site productivity, including materials quantity and movement, volume and compaction data, and fleet and asset management information, can be shared across the organization to enable rapid decision-making and better communication.
The Connected Controller
The Trimble Connected Controller solution wirelessly syncs a Trimble Site Positioning System in the field with the office and allows the Trimble Controller to receive GNSS corrections via the Internet. A grade checker can receive the design model, create new measurements and then send the measurement and stakeout results back to the office for review. Design changes originating in the office can also be sent to the controller so field crews are rapidly updated with current information. All of this is accomplished without personnel ever leaving the site or their desk, increasing productivity and reducing costs.
The Connected Machine
The Trimble Connected Machine solution uses hardware included in all Trimble Grade Control Systems to help contractors connect their assets and see what machines are doing. Machines can collect as-built measurement data for office delivery, and receive GNSS corrections using the Internet. A 3D design created in the office can be sent to the machine operator for faster, more precise grading and earthmoving. Additionally, the machine can be used for volume measurements, so expensive measurements by grade checkers occur less frequently. Drive time and rework are also minimized, as both the office and machines in the field are kept up-to-date with the latest information.
Availability
The new Trimble Connected Office, Trimble Connected Controller and Trimble Connected Machine solutions are available now through Trimble's worldwide SITECH® Technology Dealer Channel.
About Trimble's Heavy Civil Construction Division
Trimble's Heavy Civil Construction Division is a leading innovator of productivity solutions for the heavy and highway contractor. Trimble's solutions leverage a variety of technologies, including Global Positioning System (GPS), construction lasers, total stations, wireless data communications, the Internet, and application software. As part of the Trimble Connected Site strategy, these solutions provide a high-level of process and workflow integration from the design phase through to the finished project--delivering significant improvements in productivity throughout the construction lifecycle.
About Trimble
Trimble applies technology to make field and mobile workers in businesses and government significantly more productive. Solutions are focused on applications requiring position or location -- including surveying, construction, agriculture, fleet and asset management, public safety and mapping. In addition to utilizing positioning technologies, such as GPS, lasers and optics, Trimble solutions may include software content specific to the needs of the user. Wireless technologies are utilized to deliver the solution to the user and to ensure a tight coupling of the field and the back office. Founded in 1978, Trimble is headquartered in Sunnyvale, Calif.
For more information, visit: http://www.trimble.com.
GTRMB
SOURCE Trimble
Trimble
CONTACT: Willa McManmon, Investor Relations, +1-408-481-7838, willa_mcmanmon@trimble.com, or Lea Ann McNabb , Media, +1-408-481-7808, leaann_mcnabb@trimble.com, both of Trimble
Web Site: http://www.trimble.com
Three New Solutions from Trimble Heavy Civil Construction Benefit the Bottom Line
PARIS, April 16, 2012 /PRNewswire/ -- Trimble (NASDAQ:TRMB) today introduced three new solutions for heavy civil construction professionals, the Trimble® Connected Office, the Trimble Connected Controller and the Trimble Connected Machine.
When used together to create the Trimble Connected Site® solution, time and cost can be saved at every stage, virtually eliminating steps in the plan, design, construct and operate process. Trimble's Connected Site can improve the efficiency of construction projects, resulting in the earlier completion of higher quality projects at a lower cost.
"The Trimble Connected Site uses construction technology to improve efficiency and productivity, while minimizing waste and expense," said Roz Buick, vice president and general manager for Trimble's Civil Construction Division. "Trimble solutions empower contractors with site-wide information integration, and transform the way a contractor gets the job done."
The announcement was made at Intermat 2012, the international exhibition of equipment, machinery and techniques for the construction and materials industries.
The Connected Office
The Trimble Connected Office solution uses software and hosted services to create 3D construction models, perform data preparation and takeoff, wirelessly sync data, monitor site productivity, and manage fleets and assets. The 3D design model created in the office can be sent wirelessly to the field, increasing efficiency, reducing rework and saving money. Additionally, a complete view of site productivity, including materials quantity and movement, volume and compaction data, and fleet and asset management information, can be shared across the organization to enable rapid decision-making and better communication.
The Connected Controller
The Trimble Connected Controller solution wirelessly syncs a Trimble Site Positioning System in the field with the office and allows the Trimble Controller to receive GNSS corrections via the Internet. A grade checker can receive the design model, create new measurements and then send the measurement and stakeout results back to the office for review. Design changes originating in the office can also be sent to the controller so field crews are rapidly updated with current information. All of this is accomplished without personnel ever leaving the site or their desk, increasing productivity and reducing costs.
The Connected Machine
The Trimble Connected Machine solution uses hardware included in all Trimble Grade Control Systems to help contractors connect their assets and see what machines are doing. Machines can collect as-built measurement data for office delivery, and receive GNSS corrections using the Internet. A 3D design created in the office can be sent to the machine operator for faster, more precise grading and earthmoving. Additionally, the machine can be used for volume measurements, so expensive measurements by grade checkers occur less frequently. Drive time and rework are also minimized, as both the office and machines in the field are kept up-to-date with the latest information.
Availability
The new Trimble Connected Office, Trimble Connected Controller and Trimble Connected Machine solutions are available now through Trimble's worldwide SITECH® Technology Dealer Channel.
About Trimble's Heavy Civil Construction Division
Trimble's Heavy Civil Construction Division is a leading innovator of productivity solutions for the heavy and highway contractor. Trimble's solutions leverage a variety of technologies, including Global Positioning System (GPS), construction lasers, total stations, wireless data communications, the Internet, and application software. As part of the Trimble Connected Site strategy, these solutions provide a high-level of process and workflow integration from the design phase through to the finished project--delivering significant improvements in productivity throughout the construction lifecycle.
About Trimble
Trimble applies technology to make field and mobile workers in businesses and government significantly more productive. Solutions are focused on applications requiring position or location -- including surveying, construction, agriculture, fleet and asset management, public safety and mapping. In addition to utilizing positioning technologies, such as GPS, lasers and optics, Trimble solutions may include software content specific to the needs of the user. Wireless technologies are utilized to deliver the solution to the user and to ensure a tight coupling of the field and the back office. Founded in 1978, Trimble is headquartered in Sunnyvale, Calif.
For more information, visit: http://www.trimble.com.
GTRMB
SOURCE Trimble
Trimble
CONTACT: Willa McManmon, Investor Relations, +1-408-481-7838, willa_mcmanmon@trimble.com, or Lea Ann McNabb , Media, +1-408-481-7808, leaann_mcnabb@trimble.com, both of Trimble
Web Site: http://www.trimble.com