Microsemi Unveils Industry's First 60W IEEE 802.3at-compliant Power-over-Ethernet (PoE) Midspans for Outdoors
Poster: SySAdmin
Posted on March 28, 2012 at 6:14:01 AM
Microsemi Unveils Industry's First 60W IEEE 802.3at-compliant Power-over-Ethernet (PoE) Midspans for Outdoors
PD-9501GO/AC Enables PoE Outdoor Installation for 60W WLAN Access Points and IP Cameras
ALISO VIEJO, Calif., March 28, 2012 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced at the International Security Conference (ISC) West its new PD-9501GO/AC, the industry's first 60 Watt (W) IEEE-compliant Power-over-Ethernet (PoE) midspan that delivers power over standard Ethernet cabling to outdoor devices such as wireless LAN access points (WLAN) and Internet protocol (IP) cameras. Microsemi is demonstrating the new midspan, which is now available, at ISC West in booth #5045 March 28-30.
(Logo: http://photos.prnewswire.com/prnh/20110909/MM66070LOGO)
The PD-9501GO/AC single port midspan supports the IEEE802.3at standard at 10/100/1000Mbps data rates for outdoor installations and is backward-compatible with the earlier IEEE802.3af standard. It allows WLAN access points, security network cameras and other IP terminals to receive power, along with data, over standard Ethernet cables, leaving network infrastructure completely unaltered. The midspan also features plug-and-play installation, energy efficiency, location flexibility and low-cost installation.
"Microsemi's PowerDsine®( )PD-9501GO/AC PoE midspan offers highly cost-effective functionality, providing our customers with 60W of power while ensuring safe and reliable operation in outdoor environments," said Amir Asvadi, vice president and general manager of the Analog Mixed Signal Group at Microsemi. "As one of the leaders in PoE technology, Microsemi will continue to expand our PoE solutions for a wide range of market applications, including wireless point-to-point and WiMax/LTE."
The new midspan solves power-deployment challenges associated with outdoor locations where electrical outlets are not always available, extreme temperatures or humidity are often a factor, and equipment must withstand surges caused by lightning. With its surge protection for both the alternating current (AC) and PoE ports, the PD-9501GO/AC protects indoor equipment from outdoor surges that could damage powered devices and their network switches without the need for costly companion protection units.
Key features include:
-- Outdoor rated to International Protection 66 (IP66) standards
-- Extended temperature range (-40 degrees C, +55 degrees C)
-- IEEE802.3at standard compliant
-- Power provided using all four pairs
-- Supports 10/100/1000Mbps data rates
-- Plug-and-play installation (installer does not have to open unit)
-- Supports both 802.3af and 802.3at powered devices
-- Includes integral surge protection
Like Microsemi's other 60W midspans, the PD-9501GO/AC includes a gigabit interface to more easily support high-power devices such as pan-tilt-zoom (PTZ) cameras and WLAN AP that supports 802.11n. It also implements two-event classification as specified in the IEEE 802.3at specifications for communications with connected devices. All members of the PD-95xxG series family are designed to power high power network devices over Ethernet cabling, eliminating the need for wiring to external AC power sources. They also feature a proprietary power feed technology that supports all legacy PoE devices, providing the most energy efficient solution available today. Microsemi's expanded PD-95xxG family complements an extensive midspan portfolio that includes both managed and unmanaged products in a wide range of port densities.
About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor solutions for: aerospace, defense and security; enterprise and communications; and medical, industrial and alternative energy markets. Products include high-performance, high-reliability analog and RF devices, mixed-signal and RF integrated circuits, customizable SoCs, FPGAs, and complete subsystems. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,000 employees globally.Learn more at http://www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to its new PD-9501GO/AC midspan, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
SOURCE Microsemi Corporation
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Microsemi Corporation
CONTACT: Gwen Carlson, Director of Marcom/Product PR, +1-949-380-6135, or Beth P. Quezada, PR Specialist, +1-949-380-6102, press@microsemi.com
Web Site: http://www.microsemi.com
PD-9501GO/AC Enables PoE Outdoor Installation for 60W WLAN Access Points and IP Cameras
ALISO VIEJO, Calif., March 28, 2012 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced at the International Security Conference (ISC) West its new PD-9501GO/AC, the industry's first 60 Watt (W) IEEE-compliant Power-over-Ethernet (PoE) midspan that delivers power over standard Ethernet cabling to outdoor devices such as wireless LAN access points (WLAN) and Internet protocol (IP) cameras. Microsemi is demonstrating the new midspan, which is now available, at ISC West in booth #5045 March 28-30.
(Logo: http://photos.prnewswire.com/prnh/20110909/MM66070LOGO)
The PD-9501GO/AC single port midspan supports the IEEE802.3at standard at 10/100/1000Mbps data rates for outdoor installations and is backward-compatible with the earlier IEEE802.3af standard. It allows WLAN access points, security network cameras and other IP terminals to receive power, along with data, over standard Ethernet cables, leaving network infrastructure completely unaltered. The midspan also features plug-and-play installation, energy efficiency, location flexibility and low-cost installation.
"Microsemi's PowerDsine®( )PD-9501GO/AC PoE midspan offers highly cost-effective functionality, providing our customers with 60W of power while ensuring safe and reliable operation in outdoor environments," said Amir Asvadi, vice president and general manager of the Analog Mixed Signal Group at Microsemi. "As one of the leaders in PoE technology, Microsemi will continue to expand our PoE solutions for a wide range of market applications, including wireless point-to-point and WiMax/LTE."
The new midspan solves power-deployment challenges associated with outdoor locations where electrical outlets are not always available, extreme temperatures or humidity are often a factor, and equipment must withstand surges caused by lightning. With its surge protection for both the alternating current (AC) and PoE ports, the PD-9501GO/AC protects indoor equipment from outdoor surges that could damage powered devices and their network switches without the need for costly companion protection units.
Key features include:
-- Outdoor rated to International Protection 66 (IP66) standards
-- Extended temperature range (-40 degrees C, +55 degrees C)
-- IEEE802.3at standard compliant
-- Power provided using all four pairs
-- Supports 10/100/1000Mbps data rates
-- Plug-and-play installation (installer does not have to open unit)
-- Supports both 802.3af and 802.3at powered devices
-- Includes integral surge protection
Like Microsemi's other 60W midspans, the PD-9501GO/AC includes a gigabit interface to more easily support high-power devices such as pan-tilt-zoom (PTZ) cameras and WLAN AP that supports 802.11n. It also implements two-event classification as specified in the IEEE 802.3at specifications for communications with connected devices. All members of the PD-95xxG series family are designed to power high power network devices over Ethernet cabling, eliminating the need for wiring to external AC power sources. They also feature a proprietary power feed technology that supports all legacy PoE devices, providing the most energy efficient solution available today. Microsemi's expanded PD-95xxG family complements an extensive midspan portfolio that includes both managed and unmanaged products in a wide range of port densities.
About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor solutions for: aerospace, defense and security; enterprise and communications; and medical, industrial and alternative energy markets. Products include high-performance, high-reliability analog and RF devices, mixed-signal and RF integrated circuits, customizable SoCs, FPGAs, and complete subsystems. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,000 employees globally.Learn more at http://www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to its new PD-9501GO/AC midspan, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
SOURCE Microsemi Corporation
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Microsemi Corporation
CONTACT: Gwen Carlson, Director of Marcom/Product PR, +1-949-380-6135, or Beth P. Quezada, PR Specialist, +1-949-380-6102, press@microsemi.com
Web Site: http://www.microsemi.com