Microsemi Introduces Energy-efficient PoE (EEPoE) Midspans at Cisco Live London Show
Poster: SySAdmin
Posted on January 30, 2012 at 7:14:01 AM
Microsemi Introduces Energy-efficient PoE (EEPoE) Midspans at Cisco Live London Show
Industry's First Green Midspans Cut Energy Dissipation on Network Cables in Half
ALISO VIEJO, Calif. and LONDON, Jan. 30, 2012 /PRNewswire/ -- Microsemi Corporation (Nasdaq:MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced its new high-efficiency Power-over-Ethernet (PoE) midspans at the Cisco Live London show. The new PoE devices reduce energy consumption on network cables by as much as 50 percent compared to alternative midspans and PoE network switches. The Microsemi PowerDsine(®) PD-5524G EEPoE midspan complies with IEEE802.3at 2009 standards for delivering up to 30 watts (W) of power to network devices including IP cameras, access control systems and thin clients, over the same standard CAT5 cabling as data. Microsemi is demonstrating its new midspans at Cisco Live London in booth #E87 Jan. 30-Feb. 3.
(Logo: http://photos.prnewswire.com/prnh/20110909/MM66070LOGO)
"Microsemi has achieved yet another major milestone in the energy-saving capabilities of PoE technology," said Amir Asvadi, vice president and general manager of the Analog Mixed Signal Group at Microsemi. "Our PD-5524G EEPoE midspan extends the industry-leading efficiency of our PowerDsine family by using a smaller internal power supply that can later be augmented with external supplies to increase per-port capacity as power-hungry devices are added to the network. Customers can optimize their power infrastructure for the highest possible efficiency today, and increase power delivery as demand grows."
Microsemi's 24-port PD-5524G midspan cuts the Ethernet cable energy dissipation by 50 percent, which equates to 240 kilowatt hours (KWh) in annual energy savings assuming continuous operation across 12 ports at full power. With electricity costs averaging approximately $0.15/KWh, this reduction in energy usage can yield up to $600 in savings over a 16-year midspan product life cycle. Additional energy savings are possible using the PD-5524G midspan's PowerView Pro secure remote power management features, which enable network administrators to monitor and control power devices (PDs) and their power consumption after hours and on holidays and weekends. Use of the PowerView Pro scheduler to restrict power delivery to five 12-hour weekday cycles can yield additional savings of $300 per year, or $4,800 over the midspan life cycle.
The PD-5524G midspan uses technology pioneered in the company's PD-9500G family to significantly reduce power dissipation and energy consumption by delivering power over all four pairs of CAT5 cabling. The PD-5524G midspan is also the first to leverage a distributed power architecture, which enables smaller internal power supplies to be used for real-time requirements and then augmented incrementally, as needed, with Microsemi PowerDsine RPS 450 units or other external switching power supplies. The midspan supports 10/100/1000BaseT data rates and complies with IEEE802.3at standards to more easily support high-power devices such as PTZ cameras, WLAN access points and thin clients.
"Our EEPoE midspans reduce power losses up to 2.25W per link as compared to any alternative PoE solution currently available in the market, including PoE switches and PoE midspans," said Sani Ronen, director of marketing for PoE systems at Microsemi. "The ability to add external power supplies not only delivers power scalability but also provides the means to back-up priority ports in the event of a primary supply failure. Multiple PD-5524G midspans also may be configured for mutual midspan-to-midspan backup."
Microsemi's PD-5524G EEPoE midspan reduces power dissipation for any standards-compliant PD that is attached to the network, including new PDs and any of the more than 100 million that have already been deployed. The company's patented EEPoE technology is also used in its PD70x0x ICs, which implement four-pair powering and other techniques for minimizing power losses, dissipation and consumption to enable the development of smaller and more energy-efficient PDs. Microsemi's EEPoE products are part of a broad range of both two- and four-pair, standard- and high-power PoE solutions, including PSE ICs, splitters, and both managed and unmanaged midspan products in single- to 24-port configurations, with secure remote management capabilities and both IPv4 and IPv6 addressing support.
Pricing and Availability
Microsemi's PD-5524G EEPoE midspan is available in production volumes for a unit list price starting at $1,799. Product specifications, application whitepapers and other information are available at Microsemi's website: http://www.microsemi.com.
About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor solutions for: aerospace, defense and security; enterprise and communications; and medical, alternative energy and industrial markets. Products include high-performance, high-reliability analog and RF devices, mixed-signal and RF ICs, ultra low-power radios, customizable SoCs, FPGAs and complete subsystems. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,000 employees globally. Learn more at http://www.microsemi.com.
All trademarks are the property of Microsemi Corporation.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to the availability of high-efficiency Power-over-Ethernet (PoE) midspans that reduce energy consumption on network cables by as much as 50 percent compared to alternative midspans and PoE network switches, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
SOURCE Microsemi Corporation
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Microsemi Corporation
CONTACT: CONTACT: Gwen Carlson, Director of Marcom/Product PR, +1-949-380-6135, or Beth P. Quezada, PR Specialist, +1-949-380-6102, press@microsemi.com
Web Site: http://www.ciscolive.com/london
Industry's First Green Midspans Cut Energy Dissipation on Network Cables in Half
ALISO VIEJO, Calif. and LONDON, Jan. 30, 2012 /PRNewswire/ -- Microsemi Corporation (Nasdaq:MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced its new high-efficiency Power-over-Ethernet (PoE) midspans at the Cisco Live London show. The new PoE devices reduce energy consumption on network cables by as much as 50 percent compared to alternative midspans and PoE network switches. The Microsemi PowerDsine(®) PD-5524G EEPoE midspan complies with IEEE802.3at 2009 standards for delivering up to 30 watts (W) of power to network devices including IP cameras, access control systems and thin clients, over the same standard CAT5 cabling as data. Microsemi is demonstrating its new midspans at Cisco Live London in booth #E87 Jan. 30-Feb. 3.
(Logo: http://photos.prnewswire.com/prnh/20110909/MM66070LOGO)
"Microsemi has achieved yet another major milestone in the energy-saving capabilities of PoE technology," said Amir Asvadi, vice president and general manager of the Analog Mixed Signal Group at Microsemi. "Our PD-5524G EEPoE midspan extends the industry-leading efficiency of our PowerDsine family by using a smaller internal power supply that can later be augmented with external supplies to increase per-port capacity as power-hungry devices are added to the network. Customers can optimize their power infrastructure for the highest possible efficiency today, and increase power delivery as demand grows."
Microsemi's 24-port PD-5524G midspan cuts the Ethernet cable energy dissipation by 50 percent, which equates to 240 kilowatt hours (KWh) in annual energy savings assuming continuous operation across 12 ports at full power. With electricity costs averaging approximately $0.15/KWh, this reduction in energy usage can yield up to $600 in savings over a 16-year midspan product life cycle. Additional energy savings are possible using the PD-5524G midspan's PowerView Pro secure remote power management features, which enable network administrators to monitor and control power devices (PDs) and their power consumption after hours and on holidays and weekends. Use of the PowerView Pro scheduler to restrict power delivery to five 12-hour weekday cycles can yield additional savings of $300 per year, or $4,800 over the midspan life cycle.
The PD-5524G midspan uses technology pioneered in the company's PD-9500G family to significantly reduce power dissipation and energy consumption by delivering power over all four pairs of CAT5 cabling. The PD-5524G midspan is also the first to leverage a distributed power architecture, which enables smaller internal power supplies to be used for real-time requirements and then augmented incrementally, as needed, with Microsemi PowerDsine RPS 450 units or other external switching power supplies. The midspan supports 10/100/1000BaseT data rates and complies with IEEE802.3at standards to more easily support high-power devices such as PTZ cameras, WLAN access points and thin clients.
"Our EEPoE midspans reduce power losses up to 2.25W per link as compared to any alternative PoE solution currently available in the market, including PoE switches and PoE midspans," said Sani Ronen, director of marketing for PoE systems at Microsemi. "The ability to add external power supplies not only delivers power scalability but also provides the means to back-up priority ports in the event of a primary supply failure. Multiple PD-5524G midspans also may be configured for mutual midspan-to-midspan backup."
Microsemi's PD-5524G EEPoE midspan reduces power dissipation for any standards-compliant PD that is attached to the network, including new PDs and any of the more than 100 million that have already been deployed. The company's patented EEPoE technology is also used in its PD70x0x ICs, which implement four-pair powering and other techniques for minimizing power losses, dissipation and consumption to enable the development of smaller and more energy-efficient PDs. Microsemi's EEPoE products are part of a broad range of both two- and four-pair, standard- and high-power PoE solutions, including PSE ICs, splitters, and both managed and unmanaged midspan products in single- to 24-port configurations, with secure remote management capabilities and both IPv4 and IPv6 addressing support.
Pricing and Availability
Microsemi's PD-5524G EEPoE midspan is available in production volumes for a unit list price starting at $1,799. Product specifications, application whitepapers and other information are available at Microsemi's website: http://www.microsemi.com.
About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor solutions for: aerospace, defense and security; enterprise and communications; and medical, alternative energy and industrial markets. Products include high-performance, high-reliability analog and RF devices, mixed-signal and RF ICs, ultra low-power radios, customizable SoCs, FPGAs and complete subsystems. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,000 employees globally. Learn more at http://www.microsemi.com.
All trademarks are the property of Microsemi Corporation.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to the availability of high-efficiency Power-over-Ethernet (PoE) midspans that reduce energy consumption on network cables by as much as 50 percent compared to alternative midspans and PoE network switches, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
SOURCE Microsemi Corporation
Photo:http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
http://photoarchive.ap.org/
Microsemi Corporation
CONTACT: CONTACT: Gwen Carlson, Director of Marcom/Product PR, +1-949-380-6135, or Beth P. Quezada, PR Specialist, +1-949-380-6102, press@microsemi.com
Web Site: http://www.ciscolive.com/london