Page All:
Page 1
Atmel Launches Industry's First Single-Package Microcontroller with LF-RFID Reader
Enables small, low-cost RFID readers and programmers with only a few external components
HEILBRONN, Germany, Nov. 15, 2011 /PRNewswire/ -- Atmel® Corporation (NASDAQ: ATML), a leader in microcontroller and touch technology solutions, today announced availability of an AVR® microcontroller (MCU) with an RFID reader block and 16kBytes of in-system self-programmable Flash. Available in a 5mm x 7mm QFN package and operating in the low-frequency (LF) range at 100-150kHz, the Atmel ATA5505 is suitable for all kinds of LF Amplitude Shift Keying (ASK) RFID readers and programmers for access control, industrial automation and animal identification applications.
The ATA5505 makes building a complete reader an easy process requiring just a few external components and an antenna coil. Using the new device eliminates the need for expensive discrete components such as crystals, which are currently required with competitors' 2-chip RFID solutions.
Since the ATA5505 is the industry's only MCU that features full LF RFID reader functionality within a single package, the required printed circuit board (PCB) footprint is smaller than with competing solutions where the MCU and RFID reader are located in two different packages. In addition to entire readers, customers can also develop and manufacture very small, low-cost reference PCBs for various reader types.
The Atmel AVR MCU provides 512Byte SRAM, 512Byte EEPROM, 16 general-purpose I/O lines, 32 general-purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high-speed timer/counter, a universal serial interface (USI), a LIN controller, internal and external interrupts, a 11-channel 10-bit A/D converter, programmable watchdog timer with internal oscillator and three software-selectable power-saving modes. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1MIPS per MHz, balancing power consumption and processing speed.
Availability, Pricing and Photo
Samples are available now. Pricing for the ATA5505 in 10,000-piece quantities starts at US $2.61. A demo kit (ATA5505-EK1) in a USB form factor is also available to demonstrate the device with additional components. Gerber layout data is available on request. Customers can also develop their own code using standard tools such as AVR Studio® available at http://www.atmel.com/avrstudio. By adding a WinAVR plug-in, designers can create a complete design environment including compiler, programmer and debugger software. The ATA5505-EK1 kit is available for USD $79.
To download a high-resolution photo of the ATA5505, please click the following link: http://www.atmel.com/pressroom/photos/ATA5505.jpg.
About Atmel
Atmel Corporation (Nasdaq: ATML) is a worldwide leader in the design and manufacture of microcontrollers, capacitive touch solutions, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on industrial, consumer, communications, computing and automotive markets.
© 2011 Atmel Corporation. All Rights Reserved. Atmel®, Atmel logo and combinations thereof, AVR®, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
More Information:
More information on the ATA5505 RFID MCU is available at:
http://www.atmel.com/dyn/products/product_card.asp?part_id=17241&category_id=171&family_id=644&subfamily_id=2358
To see the latest Atmel videos, visit the Atmel YouTube Channel at http://www.atmel.com/youtube. You can follow Atmel on Twitter http://www.atmel.com/twitter or on Facebook at http://www.atmel.com/facebook.
Press Contacts:
Dr. Susanne van Clewe, Marcom Director Automotive
Phone: +49 7131 67-2081, Email: susanne.van-clewe@atmel.com
Clive Over, Director, Public Relations
Tel: (+1) (408) 436-4305, Email: clive.over@atmel.com
SOURCE Atmel Corporation
Atmel Corporation
Web Site: http://www.atmel.com
Atmel Launches Industry's First Single-Package Microcontroller with LF-RFID Reader
Enables small, low-cost RFID readers and programmers with only a few external components
HEILBRONN, Germany, Nov. 15, 2011 /PRNewswire/ -- Atmel® Corporation (NASDAQ: ATML), a leader in microcontroller and touch technology solutions, today announced availability of an AVR® microcontroller (MCU) with an RFID reader block and 16kBytes of in-system self-programmable Flash. Available in a 5mm x 7mm QFN package and operating in the low-frequency (LF) range at 100-150kHz, the Atmel ATA5505 is suitable for all kinds of LF Amplitude Shift Keying (ASK) RFID readers and programmers for access control, industrial automation and animal identification applications.
The ATA5505 makes building a complete reader an easy process requiring just a few external components and an antenna coil. Using the new device eliminates the need for expensive discrete components such as crystals, which are currently required with competitors' 2-chip RFID solutions.
Since the ATA5505 is the industry's only MCU that features full LF RFID reader functionality within a single package, the required printed circuit board (PCB) footprint is smaller than with competing solutions where the MCU and RFID reader are located in two different packages. In addition to entire readers, customers can also develop and manufacture very small, low-cost reference PCBs for various reader types.
The Atmel AVR MCU provides 512Byte SRAM, 512Byte EEPROM, 16 general-purpose I/O lines, 32 general-purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high-speed timer/counter, a universal serial interface (USI), a LIN controller, internal and external interrupts, a 11-channel 10-bit A/D converter, programmable watchdog timer with internal oscillator and three software-selectable power-saving modes. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1MIPS per MHz, balancing power consumption and processing speed.
Availability, Pricing and Photo
Samples are available now. Pricing for the ATA5505 in 10,000-piece quantities starts at US $2.61. A demo kit (ATA5505-EK1) in a USB form factor is also available to demonstrate the device with additional components. Gerber layout data is available on request. Customers can also develop their own code using standard tools such as AVR Studio® available at http://www.atmel.com/avrstudio. By adding a WinAVR plug-in, designers can create a complete design environment including compiler, programmer and debugger software. The ATA5505-EK1 kit is available for USD $79.
To download a high-resolution photo of the ATA5505, please click the following link: http://www.atmel.com/pressroom/photos/ATA5505.jpg.
About Atmel
Atmel Corporation (Nasdaq: ATML) is a worldwide leader in the design and manufacture of microcontrollers, capacitive touch solutions, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on industrial, consumer, communications, computing and automotive markets.
© 2011 Atmel Corporation. All Rights Reserved. Atmel®, Atmel logo and combinations thereof, AVR®, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
More Information:
More information on the ATA5505 RFID MCU is available at:
http://www.atmel.com/dyn/products/product_card.asp?part_id=17241&category_id=171&family_id=644&subfamily_id=2358
To see the latest Atmel videos, visit the Atmel YouTube Channel at http://www.atmel.com/youtube. You can follow Atmel on Twitter http://www.atmel.com/twitter or on Facebook at http://www.atmel.com/facebook.
Press Contacts:
Dr. Susanne van Clewe, Marcom Director Automotive
Phone: +49 7131 67-2081, Email: susanne.van-clewe@atmel.com
Clive Over, Director, Public Relations
Tel: (+1) (408) 436-4305, Email: clive.over@atmel.com
SOURCE Atmel Corporation
Atmel Corporation
Web Site: http://www.atmel.com