KEMET Introduces T522 Reduced Leakage Conductive Polymer Capacitor Series
Poster: SySAdmin
Posted on November 2, 2011 at 3:07:01 PM
KEMET Introduces T522 Reduced Leakage Conductive Polymer Capacitor Series
GREENVILLE, S.C., Nov. 2, 2011 /PRNewswire/ -- KEMET Corporation (NYSE: KEM), a leading manufacturer of tantalum, ceramic, aluminum, film, paper and electrolytic capacitors, today announced the expansion of its KEMET Organic Capacitor (KO-CAP) Conductive Polymer portfolio with the release of the T522 Reduced Leakage Polymer Tantalum Series. T522 Series capacitors are an ideal solution for applications that seek high capacitance, low ESR, low profile, safety, and low power consumption.
"The release of our T522 Series highlights KEMET's continued commitment to capacitor technology advancements in the areas of portable electronics and other applications seeking improved battery life," said Jayson Young, KEMET Technical Product Manager for Polymer Capacitors. "These devices offer the lowest leakage values available in polymer tantalum capacitors, with upper leakage limits that are up to 70% lower than other conductive polymer capacitor products."
The T522 Series is a KEMET Organic Capacitor (KO-CAP) which utilizes organic conductive polymer as the cathode plate of the capacitor and is designed to meet the needs of leakage sensitive applications such as battery supported circuits. KEMET offers this solution in low profile and standard case height configurations with capacitance values up to 470uF in 6.3V ratings and ESR offerings as low as 25mOhms.
The KO-CAP is a tantalum capacitor with a Ta anode and a Ta2O5 dielectric. KO-CAP devices eliminate the ignition failures that can occur in standard MnO2 tantalum types and may also be operated at steady state voltages up to 90% of rated voltage.
Typical applications for the T522 Series include battery-dependent applications such as handheld consumer electronics, global tracking systems, wireless sensors, and energy harvesting.
T522 Series Technical Information
-- Operating temperature range of -55 degrees C to +105 degrees C
-- ESR: 25mOhms to 40mOhms
-- Capacitance values of 150uF to 470uF
-- Voltage rating of 6.3VDC
-- EIA standard case sizes
-- Polymer cathode technology
-- High frequency capacitance retention
-- Non-ignition failure mode
-- 100% accelerated steady state aging
-- 100% surge current tested
-- Low profile designs
-- Volumetric efficiency
-- Self-healing mechanism
-- RoHS-compliant when ordered with 100% tin solder
Glossary
EIA Electronic Industries Alliance
ESR Equivalent Series Resistance
RoHS Restriction of Hazardous Substances
About KEMET
KEMET's common stock is listed on the NYSE under the symbol "KEM." At the Investor Relations section of our web site at http://www.KEMET.com/IR, users may subscribe to KEMET news releases and find additional information about our Company. KEMET applies world class service and quality to deliver industry leading, high performance capacitance solutions to its customers around the world and offers the world's most complete line of surface mount and through-hole capacitor technologies across tantalum, ceramic, film, aluminum, electrolytic, and paper dielectrics. Additional information about KEMET can be found at http://www.kemet.com.
Cautionary Statement on Forward-Looking Statements
Certain statements included herein contain forward-looking statements within the meaning of federal securities laws about KEMET Corporation's (the "Company") financial condition and results of operations that are based on management's current expectations, estimates and projections about the markets in which the Company operates, as well as management's beliefs and assumptions. Words such as "expects," "anticipates," "believes," "estimates," variations of such words and other similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and involve certain risks, uncertainties and assumptions, which are difficult to predict. Therefore, actual outcomes and results may differ materially from what is expressed or forecasted in, or implied by, such forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, which reflect management's judgment only as of the date hereof. The Company undertakes no obligation to update publicly any of these forward-looking statements to reflect new information, future events or otherwise.
Factors that may cause actual outcome and results to differ materially from those expressed in, or implied by, these forward-looking statements include, but are not necessarily limited to, generally adverse economic and industry conditions, including a decline in demand for the Company's products. Other risks and uncertainties may be described from time to time in the Company's reports and filings with the Securities and Exchange Commission.
Contact:Dean W. DimkeDirector of Corporate and Investor Communicationsdeandimke@KEMET.com954.766.2806
SOURCE KEMET Corporation
KEMET Corporation
Web Site: http://www.kemet.com
GREENVILLE, S.C., Nov. 2, 2011 /PRNewswire/ -- KEMET Corporation (NYSE: KEM), a leading manufacturer of tantalum, ceramic, aluminum, film, paper and electrolytic capacitors, today announced the expansion of its KEMET Organic Capacitor (KO-CAP) Conductive Polymer portfolio with the release of the T522 Reduced Leakage Polymer Tantalum Series. T522 Series capacitors are an ideal solution for applications that seek high capacitance, low ESR, low profile, safety, and low power consumption.
"The release of our T522 Series highlights KEMET's continued commitment to capacitor technology advancements in the areas of portable electronics and other applications seeking improved battery life," said Jayson Young, KEMET Technical Product Manager for Polymer Capacitors. "These devices offer the lowest leakage values available in polymer tantalum capacitors, with upper leakage limits that are up to 70% lower than other conductive polymer capacitor products."
The T522 Series is a KEMET Organic Capacitor (KO-CAP) which utilizes organic conductive polymer as the cathode plate of the capacitor and is designed to meet the needs of leakage sensitive applications such as battery supported circuits. KEMET offers this solution in low profile and standard case height configurations with capacitance values up to 470uF in 6.3V ratings and ESR offerings as low as 25mOhms.
The KO-CAP is a tantalum capacitor with a Ta anode and a Ta2O5 dielectric. KO-CAP devices eliminate the ignition failures that can occur in standard MnO2 tantalum types and may also be operated at steady state voltages up to 90% of rated voltage.
Typical applications for the T522 Series include battery-dependent applications such as handheld consumer electronics, global tracking systems, wireless sensors, and energy harvesting.
T522 Series Technical Information
-- Operating temperature range of -55 degrees C to +105 degrees C
-- ESR: 25mOhms to 40mOhms
-- Capacitance values of 150uF to 470uF
-- Voltage rating of 6.3VDC
-- EIA standard case sizes
-- Polymer cathode technology
-- High frequency capacitance retention
-- Non-ignition failure mode
-- 100% accelerated steady state aging
-- 100% surge current tested
-- Low profile designs
-- Volumetric efficiency
-- Self-healing mechanism
-- RoHS-compliant when ordered with 100% tin solder
Glossary
EIA Electronic Industries Alliance
ESR Equivalent Series Resistance
RoHS Restriction of Hazardous Substances
About KEMET
KEMET's common stock is listed on the NYSE under the symbol "KEM." At the Investor Relations section of our web site at http://www.KEMET.com/IR, users may subscribe to KEMET news releases and find additional information about our Company. KEMET applies world class service and quality to deliver industry leading, high performance capacitance solutions to its customers around the world and offers the world's most complete line of surface mount and through-hole capacitor technologies across tantalum, ceramic, film, aluminum, electrolytic, and paper dielectrics. Additional information about KEMET can be found at http://www.kemet.com.
Cautionary Statement on Forward-Looking Statements
Certain statements included herein contain forward-looking statements within the meaning of federal securities laws about KEMET Corporation's (the "Company") financial condition and results of operations that are based on management's current expectations, estimates and projections about the markets in which the Company operates, as well as management's beliefs and assumptions. Words such as "expects," "anticipates," "believes," "estimates," variations of such words and other similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and involve certain risks, uncertainties and assumptions, which are difficult to predict. Therefore, actual outcomes and results may differ materially from what is expressed or forecasted in, or implied by, such forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, which reflect management's judgment only as of the date hereof. The Company undertakes no obligation to update publicly any of these forward-looking statements to reflect new information, future events or otherwise.
Factors that may cause actual outcome and results to differ materially from those expressed in, or implied by, these forward-looking statements include, but are not necessarily limited to, generally adverse economic and industry conditions, including a decline in demand for the Company's products. Other risks and uncertainties may be described from time to time in the Company's reports and filings with the Securities and Exchange Commission.
Contact:Dean W. DimkeDirector of Corporate and Investor Communicationsdeandimke@KEMET.com954.766.2806
SOURCE KEMET Corporation
KEMET Corporation
Web Site: http://www.kemet.com