National Instruments Extends Leading PXI RF Test Performance to 14 GHz

Author
SySAdmin
Posted
August 2, 2011
Views
899

Page All:

Page 1
National Instruments Extends Leading PXI RF Test Performance to 14 GHz

New Vector Signal Analyzer Delivers Industry's Best Performance, Surpasses Box Instrumentation

AUSTIN, Texas, Aug. 2, 2011 /PRNewswire/ -- NIWeek - National Instruments (Nasdaq: NATI) today introduced a 14 GHz version of its NI PXIe-5665 high-performance RF vector signal analyzer (VSA), which delivers best-in-class dynamic range and accuracy in a cost-effective PXI form factor. The new VSA features industry-leading phase noise and dynamic range, regardless of form factor, including traditional rack-and-stack instruments. Because of its PXI platform, the VSA can deliver measurement speeds up to 20 times faster than box instruments and for less cost. Additionally, it takes advantage of multicore computing architectures and parallel programming capabilities through NI LabVIEW system design software. It also offers peer-to-peer data streaming for signal processing and a flexible multiple input, multiple output (MIMO) architecture for phase-coherent measurements. Such features make it ideal for demanding RF test applications including radio detection and ranging (RADAR), satellite, radio and harmonic testing.

To view the multimedia assets associated with this release, please click: http://multivu.prnewswire.com/mnr/nationalinstruments/51200/

(Photo: http://photos.prnewswire.com/prnh/20110802/MM41104 )

"The new NI PXIe-5665 VSA gives ST-Ericsson the performance and accuracy we need for 3GPP RF IC design validation in our characterization labs," said Sylvain Bertrand, RF broadband validation manager at ST-Ericsson.  "At the bottom line, the VSA reduces our system cost while increasing flexibility and decreasing physical bulk compared to our previous box solutions."

The VSA offers the same industry-leading performance as the 3.6 GHz version of the NI PXIe-5665 while extending the capabilities into the 14 GHz frequency range. The VSA consists of the new NI PXIe-5605 downconverter, the NI PXIe-5653 local oscillator synthesizer and the NI PXIe-5622, a 150 MS/s intermediate frequency (IF) digitizer. This combination creates an ideal solution for spectrum and wideband vector signal analysis over a frequency range of 20 Hz to 14 GHz with analysis bandwidths up to 50 MHz. It features the industry's best third-order intercept point at +24 dBm with an absolute amplitude accuracy of +/- 0.10 dB as well as an impressive error vector magnitude of 0.33 percent for a 256 QAM modulated signal. It also delivers an exceptionally low phase noise of -129 dBc/Hz at a 10 kHz offset at 800 MHz and an average noise level of -165 dBm/Hz.

Because the new 14 GHz NI PXIe-5665 joins an industry portfolio of more than 1,500 software-defined PXI modular instruments, engineers can mix and match the VSA with a variety of modules and control an entire automated test system with LabVIEW system design software. Engineers can take advantage of the VSA's software-defined performance with RF software toolkits for LabVIEW, NI LabWindows(TM)/CVI and .NET to test the latest RADAR, satellite, radio and numerous RF and wireless communication standards including GSM/EDGE, WCDMA, LTE, WLAN and WiMAX.

The 14 GHz NI PXIe-5665 VSA will be available for shipping this October. To learn more about the new VSA, readers can visit http://www.ni.com/rf.

About National Instruments

National Instruments (http://www.ni.com) is transforming the way engineers and scientists design, prototype and deploy systems for measurement, automation and embedded applications. NI empowers customers with off-the-shelf software such as NI LabVIEW and modular cost-effective hardware, and sells to a broad base of more than 30,000 different companies worldwide, with its largest customer representing approximately 4 percent of revenue in 2010 and no one industry representing more than 15 percent of revenue. Headquartered in Austin, Texas, NI has approximately 5,500 employees and direct operations in more than 40 countries. For the past 12 years, FORTUNE magazine has named NI one of the 100 best companies to work for in America. Readers can obtain investment information from the company's investor relations department by calling (512) 683-5090, emailing nati@ni.com or visiting http://www.ni.com/nati.

    Pricing and Contact Information

    NI PXIe-5665 14 GHz vector signal       11500 N Mopac Expwy, Austin, Texas
     analyzer                               78759-3504
    Priced* from $49,999; euro 39,999; yen  Tel: (800) 258-7022, Fax: (512)
     7,000,000                              683-9300
    Web: http://www.ni.com/rf                     Email: info@ni.com
    *All prices are subject to change
     without notice.

CVI, LabVIEW, National Instruments, NI, ni.com and NIWeek are trademarks of National Instruments. The mark LabWindows is used under license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks or trade names of their respective companies.

(Logo: http://photos.prnewswire.com/prnh/20080723/LAW030LOGO )

Editor Contact: Trisha McDonell, (512) 683-6215
Reader Contact: Ernest Martinez, (800) 258-7022

SOURCE  National Instruments

Photo:http://photos.prnewswire.com/prnh/20110802/MM41104
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20080723/LAW030LOGO
http://photoarchive.ap.org/
Video:http://multivu.prnewswire.com/mnr/nationalinstruments/51200
National Instruments

Web Site: http://www.ni.com

Title

Medium Image View Large