Page All:
Page 1
SAN Storage and RAID - Maximising Efficiency in your Data Centre
LONDON, April 20, 2011/PRNewswire/ -- In running a data centre environment, is any single factor more important
than system reliability? Probably not. After all, without it you have no data
centre. And you have an expensive failure instead.
System reliability is so vital, entire industries are dedicated to
ensuring it. RAID systems are a fail-safe solution to the problem of disk
failure. In such an instance, data still exists on other disk(s). Mission
critical systems have a fail-over system in place. In the event of any server
or network failure, another system will initiate and thus remain on-line.
However, despite all modern back-ups and fail-safes, given the very
nature of Windows file systems, they will fragment. If unchecked, this will
and in fact does cause problems to the user, network and the company as a
whole.
Fragmentation is a calculated liability built into every Windows
operating system, created deliberately with the purpose of utilising disk
space more efficiently. The downside is that it scatters fragmented files all
over the disk, and any disk drive used anywhere for any purpose including
RAID, mirrored systems, or backups is subjected to the harmful effects
caused.
In the IT world, the fact that fragmentation slows down performance is an
"everyone knows." But what might not be so well known is fragmentation's
impact on system reliability. From boot-up to shutdown, a fragmented drive
can cause problems with almost any system-level action in Windows. A prime
example is the fact that the Windows operating system constantly uses the
disk-based page file - hence, reliable disk operation is critical to reliable
system operation. Fragmentation issues with the page file can cause "out of
virtual memory" errors and can also cause data loss. Elsewhere, a heavily
fragmented Master File Table (the file allocation table used by NTFS, the
Windows file system) can slow the already extended boot process of a Windows
computer.
SAN Storage and NTFS
Today, using SANs to meet storage requirements have become the norm, SANs
typically employ a clustered/SAN file system to pool disk arrays into a
virtualized storage volume. This is not NTFS, but rather proprietary
software, provided by a SAN hardware or software vendor. This file system
essentially "runs on top of NTFS", it does not replace it. Keeping in mind
that every file system is a "virtual" disk, stacking one virtual component
over another (i.e. one file system on top of another) is very doable and
increasingly more common.
What the vendor of a SAN file system does to his file system is
irrelevant to NTFS. Claims that "you do not need to defragment" may be
misunderstood and incorrectly implied to mean "NTFS". It is very possible
that you do not need to defragment the "SAN file system". The expert for that
file system and the source from which you should get setup tips, best
practices, and SAN I/O optimization methodologies is that manufacturer.
As for NTFS, it still fragments and causes the Windows OS to "split" I/O
requests for files sent into the SAN, creating a performance penalty. Given
that SANs are only ever block-level storage, they do not know what I/Os
relate to what files. Therefore they cannot intelligently spread the
fragments of a file across multiple disks. A whole mass of separate I/Os
writes/reads for fragmented files (which will most certainly be interspersed
with other simultaneous data writes/reads) will be non-optimally spread
across the disks in the SAN storage pool i.e. write more fragments of a given
file to one disk rather than evenly spreading the data across all the disks.
SAN file system vendors may offer optimization strategies to move data
around the disks as it learns over time - typical data requests are not
properly load-balanced across SAN spindles. Generally speaking, the above
holds true for disk striping as well (RAID). SAN designers or developers
agree that NTFS fragmentation IS an issue and advanced defragmentation is
important ("basic" defragmenters can actually cause worse problems)
File fragmentation also takes a serious physical toll on hard drives.
Disk head movement is increased by the need to access data contained in
fragmented files. The more disk head movement, the less mean time between
failure (MTBF) will be experienced, shortening the life of the hard drive.
The old days of scheduled fragmentation are legacy procedures and will
not be effective in today's systems due to the sheer size of disks and
storage. Running the built-in tool is simply not comprehensive enough to reap
the necessary benefits and see the original performance your systems once
boasted. Reliability is required 24/7, regardless of the type of backup,
storage technology (RAID, SAN) used. System up-time is imperative and
reliability is the key. For an all-in-one solution to performance and
reliability issues, download a free trialware of Diskeeper at
http://www.diskeeper.com
Source: Diskeeper Corporation Europe
Media Contact: Dorian Culmer, Email: d.culmer@diskeeper.co.uk, Phone: +44(0)1293-763290
SAN Storage and RAID - Maximising Efficiency in your Data Centre
LONDON, April 20, 2011/PRNewswire/ -- In running a data centre environment, is any single factor more important
than system reliability? Probably not. After all, without it you have no data
centre. And you have an expensive failure instead.
System reliability is so vital, entire industries are dedicated to
ensuring it. RAID systems are a fail-safe solution to the problem of disk
failure. In such an instance, data still exists on other disk(s). Mission
critical systems have a fail-over system in place. In the event of any server
or network failure, another system will initiate and thus remain on-line.
However, despite all modern back-ups and fail-safes, given the very
nature of Windows file systems, they will fragment. If unchecked, this will
and in fact does cause problems to the user, network and the company as a
whole.
Fragmentation is a calculated liability built into every Windows
operating system, created deliberately with the purpose of utilising disk
space more efficiently. The downside is that it scatters fragmented files all
over the disk, and any disk drive used anywhere for any purpose including
RAID, mirrored systems, or backups is subjected to the harmful effects
caused.
In the IT world, the fact that fragmentation slows down performance is an
"everyone knows." But what might not be so well known is fragmentation's
impact on system reliability. From boot-up to shutdown, a fragmented drive
can cause problems with almost any system-level action in Windows. A prime
example is the fact that the Windows operating system constantly uses the
disk-based page file - hence, reliable disk operation is critical to reliable
system operation. Fragmentation issues with the page file can cause "out of
virtual memory" errors and can also cause data loss. Elsewhere, a heavily
fragmented Master File Table (the file allocation table used by NTFS, the
Windows file system) can slow the already extended boot process of a Windows
computer.
SAN Storage and NTFS
Today, using SANs to meet storage requirements have become the norm, SANs
typically employ a clustered/SAN file system to pool disk arrays into a
virtualized storage volume. This is not NTFS, but rather proprietary
software, provided by a SAN hardware or software vendor. This file system
essentially "runs on top of NTFS", it does not replace it. Keeping in mind
that every file system is a "virtual" disk, stacking one virtual component
over another (i.e. one file system on top of another) is very doable and
increasingly more common.
What the vendor of a SAN file system does to his file system is
irrelevant to NTFS. Claims that "you do not need to defragment" may be
misunderstood and incorrectly implied to mean "NTFS". It is very possible
that you do not need to defragment the "SAN file system". The expert for that
file system and the source from which you should get setup tips, best
practices, and SAN I/O optimization methodologies is that manufacturer.
As for NTFS, it still fragments and causes the Windows OS to "split" I/O
requests for files sent into the SAN, creating a performance penalty. Given
that SANs are only ever block-level storage, they do not know what I/Os
relate to what files. Therefore they cannot intelligently spread the
fragments of a file across multiple disks. A whole mass of separate I/Os
writes/reads for fragmented files (which will most certainly be interspersed
with other simultaneous data writes/reads) will be non-optimally spread
across the disks in the SAN storage pool i.e. write more fragments of a given
file to one disk rather than evenly spreading the data across all the disks.
SAN file system vendors may offer optimization strategies to move data
around the disks as it learns over time - typical data requests are not
properly load-balanced across SAN spindles. Generally speaking, the above
holds true for disk striping as well (RAID). SAN designers or developers
agree that NTFS fragmentation IS an issue and advanced defragmentation is
important ("basic" defragmenters can actually cause worse problems)
File fragmentation also takes a serious physical toll on hard drives.
Disk head movement is increased by the need to access data contained in
fragmented files. The more disk head movement, the less mean time between
failure (MTBF) will be experienced, shortening the life of the hard drive.
The old days of scheduled fragmentation are legacy procedures and will
not be effective in today's systems due to the sheer size of disks and
storage. Running the built-in tool is simply not comprehensive enough to reap
the necessary benefits and see the original performance your systems once
boasted. Reliability is required 24/7, regardless of the type of backup,
storage technology (RAID, SAN) used. System up-time is imperative and
reliability is the key. For an all-in-one solution to performance and
reliability issues, download a free trialware of Diskeeper at
http://www.diskeeper.com
Source: Diskeeper Corporation Europe
Media Contact: Dorian Culmer, Email: d.culmer@diskeeper.co.uk, Phone: +44(0)1293-763290