Page All:
Page 1
Thermacore Introduces New Product Line of VME64x/VPX Cold Plates for Demanding Military Cooling Applications
LANCASTER, Pa., March 15, 2011 /PRNewswire/ -- Thermacore (http://www.thermacore.com), a leading provider of advanced thermal solutions, introduces a new line of cold plates that meet the most recent VME64x/VPX standards and supports commercial off-the-shelf (COTS) packaging formats. These high conductance cold plates offer significant improvement in electronics cooling performance as compared to conventional technologies used in demanding military and aerospace applications.
(Logo: http://photos.prnewswire.com/prnh/20080902/NETU007LOGO )
The new line of lightweight, ruggedized cold plates -- available in 3U, 6U and 9U formats -- feature superior thermal performance with excellent temperature uniformity, resulting in lower electronic component temperatures and increased operational life and reliability. With the thermal performance and flexibility these advanced cold plates offer, military embedded system designers can reduce system size, weight, and power with improved cooling (SWaP-C), permitting better mobility and extended mission life.
"Thermacore continues its tradition of world-leading thermal management products with this innovative line of cold plates," said Nelson Gernert, Thermacore's Vice President of Engineering and Technology. "Our customers will appreciate the numerous benefits these new cold plates offer, including superior thermal performance, lower electronic component temperatures, design flexibility, thermal uniformity, lower mass, and drop-in replacement for existing solutions."
Thermacore offers the VME64x/VPX cold plates in three technology options. Selecting the appropriate cold plate technology is dependent on the application need for thermal performance, weight, and cost.
-- Baseline Aluminum Cold Plate. Produced from highly thermally conductive
aluminum alloys such as 6061 and 6063 with thermal conductivity values
of 166 and 201 W/m-K to meet the VME64x/VPX standards, these cold plates
meet the needs of the most basic performance requirements.
-- k-Core® Cold Plate. With up to six times the conductance of solid
aluminum designs and up to 20 percent lower mass, Thermacore's k-Core®
material -- a patented system that encapsulates Annealed Pyrolytic
Graphite (APG) with the same aluminum alloys as basic solid aluminum
cold plates -- boosts the thermal performance of the basic solid
aluminum cold plates to even lower temperatures while reducing system
mass
-- Embedded Heat Pipe Cold Plate. This cold plate option is constructed
from solid aluminum that is integrated with heat pipes to remove "hot
spots" from the applications where heat loads are concentrated.
Thermacore's embedded heat pipe cold plates offer significant thermal
performance improvement when compared with typical solid aluminum or
copper-based cold plates in electronics or computers, where the heat
source is small.
The complete line of cold plates are ideally suited for "mission critical" cooling applications, including embedded computer systems, military radars, power converters, power electronics cooling, rugged laptops and handheld devices, laser diodes, and other commercial applications such as telecom communications and RF amplifiers, low-profile applications, blade servers, high-temperature applications (greater than 100 degrees C), and high-strength and clamping-force applications.
About Thermacore
Founded in 1970, Thermacore specializes in the custom design, development, and manufacture of highly engineered thermal management systems and components for a variety of OEM applications across a diversified set of global markets that include Military/Aerospace, Computer, Communication, Energy Conversion, Medical, Transportation and Test Equipment. With over 40 years of experience in the design, development, and manufacture of advanced solid conduction assemblies, passive two-phase systems, and active pumped liquid systems, Thermacore brings unparalleled engineering design expertise and thermal solution performance, quality, and reliability to these markets. Thermacore employs more than 185 employees at 5 facilities located in the United States (Lancaster, Pennsylvania; Langhorne, Pennsylvania, Jefferson Hills, Pennsylvania, and Ronkonkoma Long Island, New York) and the United Kingdom (Ashington, Northumberland). Thermacore facilities are AS 9100 Rev B. standard, ISO 9001:2008 and ISO 14001:2004 certified. For information about Thermacore, visit http://www.thermacore.com.
Approved for Public Release, Distribution Unlimited
Related Links:
http://www.thermacore.com
SOURCE Thermacore
Photo:http://photos.prnewswire.com/prnh/20080902/NETU007LOGO
http://photoarchive.ap.org/
Thermacore
CONTACT: Gregg J. Baldassarre, Vice President, Sales and Marketing, +1-717-519-5814, g.j.baldassarre@thermacore.com
Web Site: http://www.thermacore.com
Thermacore Introduces New Product Line of VME64x/VPX Cold Plates for Demanding Military Cooling Applications
LANCASTER, Pa., March 15, 2011 /PRNewswire/ -- Thermacore (http://www.thermacore.com), a leading provider of advanced thermal solutions, introduces a new line of cold plates that meet the most recent VME64x/VPX standards and supports commercial off-the-shelf (COTS) packaging formats. These high conductance cold plates offer significant improvement in electronics cooling performance as compared to conventional technologies used in demanding military and aerospace applications.
(Logo: http://photos.prnewswire.com/prnh/20080902/NETU007LOGO )
The new line of lightweight, ruggedized cold plates -- available in 3U, 6U and 9U formats -- feature superior thermal performance with excellent temperature uniformity, resulting in lower electronic component temperatures and increased operational life and reliability. With the thermal performance and flexibility these advanced cold plates offer, military embedded system designers can reduce system size, weight, and power with improved cooling (SWaP-C), permitting better mobility and extended mission life.
"Thermacore continues its tradition of world-leading thermal management products with this innovative line of cold plates," said Nelson Gernert, Thermacore's Vice President of Engineering and Technology. "Our customers will appreciate the numerous benefits these new cold plates offer, including superior thermal performance, lower electronic component temperatures, design flexibility, thermal uniformity, lower mass, and drop-in replacement for existing solutions."
Thermacore offers the VME64x/VPX cold plates in three technology options. Selecting the appropriate cold plate technology is dependent on the application need for thermal performance, weight, and cost.
-- Baseline Aluminum Cold Plate. Produced from highly thermally conductive
aluminum alloys such as 6061 and 6063 with thermal conductivity values
of 166 and 201 W/m-K to meet the VME64x/VPX standards, these cold plates
meet the needs of the most basic performance requirements.
-- k-Core® Cold Plate. With up to six times the conductance of solid
aluminum designs and up to 20 percent lower mass, Thermacore's k-Core®
material -- a patented system that encapsulates Annealed Pyrolytic
Graphite (APG) with the same aluminum alloys as basic solid aluminum
cold plates -- boosts the thermal performance of the basic solid
aluminum cold plates to even lower temperatures while reducing system
mass
-- Embedded Heat Pipe Cold Plate. This cold plate option is constructed
from solid aluminum that is integrated with heat pipes to remove "hot
spots" from the applications where heat loads are concentrated.
Thermacore's embedded heat pipe cold plates offer significant thermal
performance improvement when compared with typical solid aluminum or
copper-based cold plates in electronics or computers, where the heat
source is small.
The complete line of cold plates are ideally suited for "mission critical" cooling applications, including embedded computer systems, military radars, power converters, power electronics cooling, rugged laptops and handheld devices, laser diodes, and other commercial applications such as telecom communications and RF amplifiers, low-profile applications, blade servers, high-temperature applications (greater than 100 degrees C), and high-strength and clamping-force applications.
About Thermacore
Founded in 1970, Thermacore specializes in the custom design, development, and manufacture of highly engineered thermal management systems and components for a variety of OEM applications across a diversified set of global markets that include Military/Aerospace, Computer, Communication, Energy Conversion, Medical, Transportation and Test Equipment. With over 40 years of experience in the design, development, and manufacture of advanced solid conduction assemblies, passive two-phase systems, and active pumped liquid systems, Thermacore brings unparalleled engineering design expertise and thermal solution performance, quality, and reliability to these markets. Thermacore employs more than 185 employees at 5 facilities located in the United States (Lancaster, Pennsylvania; Langhorne, Pennsylvania, Jefferson Hills, Pennsylvania, and Ronkonkoma Long Island, New York) and the United Kingdom (Ashington, Northumberland). Thermacore facilities are AS 9100 Rev B. standard, ISO 9001:2008 and ISO 14001:2004 certified. For information about Thermacore, visit http://www.thermacore.com.
Approved for Public Release, Distribution Unlimited
Related Links:
http://www.thermacore.com
SOURCE Thermacore
Photo:http://photos.prnewswire.com/prnh/20080902/NETU007LOGO
http://photoarchive.ap.org/
Thermacore
CONTACT: Gregg J. Baldassarre, Vice President, Sales and Marketing, +1-717-519-5814, g.j.baldassarre@thermacore.com
Web Site: http://www.thermacore.com