Page All:
Page 1
National Instruments Delivers Industry-Leading RF Performance in PXI Form Factor
New PXI RF Vector Signal Analyzer's Performance Surpasses Traditional Rack-and-Stack Instrumentation
AUSTIN, Texas, Feb. 21, 2011 /PRNewswire/ -- National Instruments (Nasdaq: NATI) today introduced the NI PXIe-5665, a 3.6 GHz RF vector signal analyzer (VSA) that delivers best-in-class RF performance in a cost-effective PXI form factor. The new VSA features industry-leading phase noise, average noise level, amplitude accuracy and dynamic range. The VSA's PXI platform also facilitates peer-to-peer streaming; includes a flexible multiple input, multiple output (MIMO) architecture for phase-coherent measurements; and offers measurement speeds that are at least five times faster than traditional rack-and-stack instruments - all of which make it ideal for demanding automated RF test applications.
"Not only is the NI PXIe-5665 VSA the highest performing instrument in its class, but it is available at a fraction of the cost of traditional rack-and-stack instruments," said Phil Hester, senior vice president of research and development at National Instruments. "Because our new PXI RF analyzer combines high-end performance with modular flexibility into one compact, affordable package, engineers now can use the same instrument from design to production."
The VSA combines the new NI PXIe-5603 downconverter with the new NI PXIe-5653 local oscillator synthesizer and the NI PXIe-5622, a 150 MS/s intermediate frequency (IF) digitizer. This combination creates an ideal solution for spectrum and wideband vector signal measurements over a frequency range from 20 Hz to 3.6 GHz with analysis bandwidths up to 50 MHz. The new VSA features an exceptionally low phase noise of -129 dBc/Hz at a 10 kHz offset at 800 MHz, an average noise level of -165 dBm/Hz, a third-order intercept point of +24 dBm and absolute amplitude accuracy of +/-0.10 dB. These specifications make the NI PXIe-5665 the highest performing instrument in its class.
For modulated signal analysis, the VSA's unique onboard self-calibration tool makes it possible to achieve an IF amplitude response of +/-0.15 dB and IF phase linearity of +/-0.1 degree. This accuracy facilitates exceptional error vector magnitude performance of less than 0.21 percent for a 256-QAM signal. The VSA's flexible, modular architecture expands to provide phase-coherent acquisition for MIMO test, as well as a 20 GHz/s scan rate and peer-to-peer streaming for efficient spectrum monitoring. Additionally, engineers can operate the NI PXIe-5665 using its RF list mode function to deterministically step through a user-defined set of RF configurations using internal timing or an external trigger to significantly reduce test time.
Because the NI PXIe-5665 joins a product line of more than 1,500 software-defined PXI modular instruments, engineers can mix and match the VSA with a variety of modules and control an entire automated test system with NI LabVIEW graphical system design software. This makes PXI systems ideal for a multitude of automated test applications.Engineers also can fully take advantage of the VSA's software-defined performance with RF software toolkits for LabVIEW, NI LabWindows(TM)/CVI and .NET to test the latest RF and wireless communication standards including GSM/EDGE, WCDMA, LTE, WLAN and WiMAX.
To learn more about the NI PXIe-5665 VSA, readers can visit http://www.ni.com/rf.
About National Instruments
National Instruments (http://www.ni.com) is transforming the way engineers and scientists design, prototype and deploy systems for measurement, automation and embedded applications. NI empowers customers with off-the-shelf software such as NI LabVIEW and modular cost-effective hardware, and sells to a broad base of more than 30,000 different companies worldwide, with no one customer representing more than 4 percent of revenue and no one industry representing more than 15 percent of revenue. Headquartered in Austin, Texas, NI has more than 5,200 employees and direct operations in more than 40 countries. For the past 12 years, FORTUNE magazine has named NI one of the 100 best companies to work for in America. Readers can obtain investment information from the company's investor relations department by calling (512) 683-5090, e-mailing nati@ni.com or visiting http://www.ni.com/nati.
Pricing and Contact Information
11500 N Mopac Expwy, Austin, Texas
NI PXIe-5665 vector signal analyzer 78759-3504
Priced* from $29,999; euro 28,799; Tel: (800) 258-7022, Fax: (512)
4,200,000 yen 683-9300
Web: http://www.ni.com/rf E-mail: info@ni.com
*All prices are subject to change
without notice.
CVI, LabVIEW, National Instruments, NI and ni.com are trademarks of National Instruments. The mark LabWindows is used under license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks or trade names of their respective companies.
Editor Contact: Julia Betts, (512) 683-8165
Reader Contact: Ernest Martinez, (800) 258-7022
SOURCE National Instruments
Photo:http://photos.prnewswire.com/prnh/20080723/LAW030LOGO
http://photoarchive.ap.org/
National Instruments
CONTACT: editors, Julia Betts, +1-512-683-8165, or readers, Ernest Martinez, 1-800-258-7022, both for National Instruments
Web Site: http://www.ni.com
National Instruments Delivers Industry-Leading RF Performance in PXI Form Factor
New PXI RF Vector Signal Analyzer's Performance Surpasses Traditional Rack-and-Stack Instrumentation
AUSTIN, Texas, Feb. 21, 2011 /PRNewswire/ -- National Instruments (Nasdaq: NATI) today introduced the NI PXIe-5665, a 3.6 GHz RF vector signal analyzer (VSA) that delivers best-in-class RF performance in a cost-effective PXI form factor. The new VSA features industry-leading phase noise, average noise level, amplitude accuracy and dynamic range. The VSA's PXI platform also facilitates peer-to-peer streaming; includes a flexible multiple input, multiple output (MIMO) architecture for phase-coherent measurements; and offers measurement speeds that are at least five times faster than traditional rack-and-stack instruments - all of which make it ideal for demanding automated RF test applications.
"Not only is the NI PXIe-5665 VSA the highest performing instrument in its class, but it is available at a fraction of the cost of traditional rack-and-stack instruments," said Phil Hester, senior vice president of research and development at National Instruments. "Because our new PXI RF analyzer combines high-end performance with modular flexibility into one compact, affordable package, engineers now can use the same instrument from design to production."
The VSA combines the new NI PXIe-5603 downconverter with the new NI PXIe-5653 local oscillator synthesizer and the NI PXIe-5622, a 150 MS/s intermediate frequency (IF) digitizer. This combination creates an ideal solution for spectrum and wideband vector signal measurements over a frequency range from 20 Hz to 3.6 GHz with analysis bandwidths up to 50 MHz. The new VSA features an exceptionally low phase noise of -129 dBc/Hz at a 10 kHz offset at 800 MHz, an average noise level of -165 dBm/Hz, a third-order intercept point of +24 dBm and absolute amplitude accuracy of +/-0.10 dB. These specifications make the NI PXIe-5665 the highest performing instrument in its class.
For modulated signal analysis, the VSA's unique onboard self-calibration tool makes it possible to achieve an IF amplitude response of +/-0.15 dB and IF phase linearity of +/-0.1 degree. This accuracy facilitates exceptional error vector magnitude performance of less than 0.21 percent for a 256-QAM signal. The VSA's flexible, modular architecture expands to provide phase-coherent acquisition for MIMO test, as well as a 20 GHz/s scan rate and peer-to-peer streaming for efficient spectrum monitoring. Additionally, engineers can operate the NI PXIe-5665 using its RF list mode function to deterministically step through a user-defined set of RF configurations using internal timing or an external trigger to significantly reduce test time.
Because the NI PXIe-5665 joins a product line of more than 1,500 software-defined PXI modular instruments, engineers can mix and match the VSA with a variety of modules and control an entire automated test system with NI LabVIEW graphical system design software. This makes PXI systems ideal for a multitude of automated test applications.Engineers also can fully take advantage of the VSA's software-defined performance with RF software toolkits for LabVIEW, NI LabWindows(TM)/CVI and .NET to test the latest RF and wireless communication standards including GSM/EDGE, WCDMA, LTE, WLAN and WiMAX.
To learn more about the NI PXIe-5665 VSA, readers can visit http://www.ni.com/rf.
About National Instruments
National Instruments (http://www.ni.com) is transforming the way engineers and scientists design, prototype and deploy systems for measurement, automation and embedded applications. NI empowers customers with off-the-shelf software such as NI LabVIEW and modular cost-effective hardware, and sells to a broad base of more than 30,000 different companies worldwide, with no one customer representing more than 4 percent of revenue and no one industry representing more than 15 percent of revenue. Headquartered in Austin, Texas, NI has more than 5,200 employees and direct operations in more than 40 countries. For the past 12 years, FORTUNE magazine has named NI one of the 100 best companies to work for in America. Readers can obtain investment information from the company's investor relations department by calling (512) 683-5090, e-mailing nati@ni.com or visiting http://www.ni.com/nati.
Pricing and Contact Information
11500 N Mopac Expwy, Austin, Texas
NI PXIe-5665 vector signal analyzer 78759-3504
Priced* from $29,999; euro 28,799; Tel: (800) 258-7022, Fax: (512)
4,200,000 yen 683-9300
Web: http://www.ni.com/rf E-mail: info@ni.com
*All prices are subject to change
without notice.
CVI, LabVIEW, National Instruments, NI and ni.com are trademarks of National Instruments. The mark LabWindows is used under license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks or trade names of their respective companies.
Editor Contact: Julia Betts, (512) 683-8165
Reader Contact: Ernest Martinez, (800) 258-7022
SOURCE National Instruments
Photo:http://photos.prnewswire.com/prnh/20080723/LAW030LOGO
http://photoarchive.ap.org/
National Instruments
CONTACT: editors, Julia Betts, +1-512-683-8165, or readers, Ernest Martinez, 1-800-258-7022, both for National Instruments
Web Site: http://www.ni.com