Page All:
Page 1
CimatronE Webinar Demonstrates Fast, Automated Mold Design
Webinar is Available for Streaming Online
NOVI, Michigan, December 22, 2010/PRNewswire-FirstCall/ -- Cimatron Technologies Inc., a subsidiary of Cimatron Limited (Nasdaq:
CIMT), a leading provider of integrated CAD/CAM solutions for mold, tool and
die makers as well as manufacturers of discrete parts, announced today that
the recording of the webinar "Automating the Mold Design Process" is
available at http://www.toolingtimes.com/mold-design.html
In the December 2010 webinar, Dan Branch, manager of technical support at
Cimatron Technologies Inc ("CTI"), took participants through the automated
mold design process from scratch. The webinar demonstrated how CimatronE's
large selection of automated applicative tools speed up the mold design
process while ensuring the user maintains complete control and flexibility.
The webinar started with the import of a non-watertight solid part,
demonstrating CimatronE's ability to start mold design immediately on
less-than-perfect parts; even though the system identified gaps in several
areas, no time was wasted mending and closing the part.
Participants could see how CimatronE allows users to quickly establish
parting directions and parting surfaces, followed by the creation of cooling
systems, ejectors, runners, and lifters. The webinar highlighted additional
time savings enabled by streamlined integration of supplier catalog parts, as
well as the ability to automate the creation of pockets in the surrounding
plates.
Finally, after creating the basis for the mold, the webinar showed how
the full associativity of CimatronE Mold Design allowed an Engineering Change
Order (ECO) to be handled quickly and effectively, including the preview of a
new ECO Documentation Tool that allows users to keep track of all changes.
"In today's market, toolmakers are under pressure to offer high quality
products at very competitive prices," said Ralph Picklo, VP Sales at CTI.
"CimatronE helps leading toolmakers to achieve these goals by upgrading the
quoting process, shortening overall delivery times and reducing costs, while
ensuring high quality design."
The webinar is available from the website of CTI's "Tooling Times"
newsletter http://www.toolingtimes.com/mold-design.html
About Cimatron
With over 25 years of experience and more than 40,000 installations
worldwide, Cimatron is a leading provider of integrated, CAD/CAM solutions
for mold, tool and die makers as well as manufacturers of discrete parts.
Cimatron is committed to providing comprehensive, cost-effective solutions
that streamline manufacturing cycles, enable collaboration with outside
vendors, and ultimately shorten product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with
solutions for mold design, die design, electrodes design, 2.5 to 5 axes
milling, wire EDM, turn, Mill-turn, rotary milling, multi-task machining, and
tombstone machining. Cimatron's subsidiaries and extensive distribution
network serve and support customers in the automotive, aerospace, medical,
consumer plastics, electronics, and other industries in over 40 countries
worldwide.
Cimatron's shares are publicly traded on the NASDAQ exchange under the
symbol CIMT. For more information, please visit the Company's web site at:
http://www.cimatron.com
This press release includes forward looking statements, within the
meaning of the Private Securities Litigation Reform Act of 1995, which are
subject to risk and uncertainties that could cause actual results to differ
materially from those anticipated. Such statements may relate to the
Company's plans, objectives and expected financial and operating results. The
words "may," "could," "would," "will," "believe," "anticipate," "estimate,"
"expect," "intend," "plan," and similar expressions or variations thereof are
intended to identify forward-looking statements. Investors are cautioned that
any such forward-looking statements are not guarantees of future performance
and involve risks and uncertainties, many of which are beyond the Company's
ability to control. The risks and uncertainties that may affect forward
looking statements include, but are not limited to: currency fluctuations,
global economic and political conditions, marketing demand for Cimatron
products and services, long sales cycles, new product development,
assimilating future acquisitions, maintaining relationships with customers
and partners, and increased competition. For more details about the risks and
uncertainties related to the Company's business, refer to the Company's
filings with the Securities and Exchange Commission. The Company cannot
assess the impact of or the extent to which any single factor or risk, or
combination of them, may cause. Cimatron undertakes no obligation to publicly
update or revise any forward looking statements, whether as a result of new
information, future events or otherwise.
For More Information Contact:
Idit Pass Lagziel Ilan Erez
Marketing Manager Chief Financial Officer
Cimatron Ltd. Cimatron Ltd.
Phone: +972-3-5312098 Phone: +972-3-531-2121
Email: iditp@cimatron.com Email: ilane@cimatron.com
Source: Cimatron Ltd
Idit Pass Lagziel, Marketing Manager, Cimatron Ltd., Phone: +972-3-5312098, Email: iditp@cimatron.com; Ilan Erez, Chief Financial Officer, Cimatron Ltd., Phone: +972-3-531-2121, Email: ilane@cimatron.com
CimatronE Webinar Demonstrates Fast, Automated Mold Design
Webinar is Available for Streaming Online
NOVI, Michigan, December 22, 2010/PRNewswire-FirstCall/ -- Cimatron Technologies Inc., a subsidiary of Cimatron Limited (Nasdaq:
CIMT), a leading provider of integrated CAD/CAM solutions for mold, tool and
die makers as well as manufacturers of discrete parts, announced today that
the recording of the webinar "Automating the Mold Design Process" is
available at http://www.toolingtimes.com/mold-design.html
In the December 2010 webinar, Dan Branch, manager of technical support at
Cimatron Technologies Inc ("CTI"), took participants through the automated
mold design process from scratch. The webinar demonstrated how CimatronE's
large selection of automated applicative tools speed up the mold design
process while ensuring the user maintains complete control and flexibility.
The webinar started with the import of a non-watertight solid part,
demonstrating CimatronE's ability to start mold design immediately on
less-than-perfect parts; even though the system identified gaps in several
areas, no time was wasted mending and closing the part.
Participants could see how CimatronE allows users to quickly establish
parting directions and parting surfaces, followed by the creation of cooling
systems, ejectors, runners, and lifters. The webinar highlighted additional
time savings enabled by streamlined integration of supplier catalog parts, as
well as the ability to automate the creation of pockets in the surrounding
plates.
Finally, after creating the basis for the mold, the webinar showed how
the full associativity of CimatronE Mold Design allowed an Engineering Change
Order (ECO) to be handled quickly and effectively, including the preview of a
new ECO Documentation Tool that allows users to keep track of all changes.
"In today's market, toolmakers are under pressure to offer high quality
products at very competitive prices," said Ralph Picklo, VP Sales at CTI.
"CimatronE helps leading toolmakers to achieve these goals by upgrading the
quoting process, shortening overall delivery times and reducing costs, while
ensuring high quality design."
The webinar is available from the website of CTI's "Tooling Times"
newsletter http://www.toolingtimes.com/mold-design.html
About Cimatron
With over 25 years of experience and more than 40,000 installations
worldwide, Cimatron is a leading provider of integrated, CAD/CAM solutions
for mold, tool and die makers as well as manufacturers of discrete parts.
Cimatron is committed to providing comprehensive, cost-effective solutions
that streamline manufacturing cycles, enable collaboration with outside
vendors, and ultimately shorten product delivery time.
The Cimatron product line includes the CimatronE and GibbsCAM brands with
solutions for mold design, die design, electrodes design, 2.5 to 5 axes
milling, wire EDM, turn, Mill-turn, rotary milling, multi-task machining, and
tombstone machining. Cimatron's subsidiaries and extensive distribution
network serve and support customers in the automotive, aerospace, medical,
consumer plastics, electronics, and other industries in over 40 countries
worldwide.
Cimatron's shares are publicly traded on the NASDAQ exchange under the
symbol CIMT. For more information, please visit the Company's web site at:
http://www.cimatron.com
This press release includes forward looking statements, within the
meaning of the Private Securities Litigation Reform Act of 1995, which are
subject to risk and uncertainties that could cause actual results to differ
materially from those anticipated. Such statements may relate to the
Company's plans, objectives and expected financial and operating results. The
words "may," "could," "would," "will," "believe," "anticipate," "estimate,"
"expect," "intend," "plan," and similar expressions or variations thereof are
intended to identify forward-looking statements. Investors are cautioned that
any such forward-looking statements are not guarantees of future performance
and involve risks and uncertainties, many of which are beyond the Company's
ability to control. The risks and uncertainties that may affect forward
looking statements include, but are not limited to: currency fluctuations,
global economic and political conditions, marketing demand for Cimatron
products and services, long sales cycles, new product development,
assimilating future acquisitions, maintaining relationships with customers
and partners, and increased competition. For more details about the risks and
uncertainties related to the Company's business, refer to the Company's
filings with the Securities and Exchange Commission. The Company cannot
assess the impact of or the extent to which any single factor or risk, or
combination of them, may cause. Cimatron undertakes no obligation to publicly
update or revise any forward looking statements, whether as a result of new
information, future events or otherwise.
For More Information Contact:
Idit Pass Lagziel Ilan Erez
Marketing Manager Chief Financial Officer
Cimatron Ltd. Cimatron Ltd.
Phone: +972-3-5312098 Phone: +972-3-531-2121
Email: iditp@cimatron.com Email: ilane@cimatron.com
Source: Cimatron Ltd
Idit Pass Lagziel, Marketing Manager, Cimatron Ltd., Phone: +972-3-5312098, Email: iditp@cimatron.com; Ilan Erez, Chief Financial Officer, Cimatron Ltd., Phone: +972-3-531-2121, Email: ilane@cimatron.com